TP-Link Router TL-WR340G User Guide

TL-WR340G/TL-WR340GD54M Wireless Router User Guide 
 55
¾
 Hardware Version -  Displays the current hardware version. The hardware version of the 
upgrade file must accord with the current hardware version. 
)  Note: 
Do not turn off the router or press the Rese t button while the firmware is being upgraded. 
The router will reboot after the Upgrading has been finished. 
3.12.3 Factory Defaults 
This page (shown in Figure 3-58) allows you to restore the factory default settings for the router. 
 
Figure...

TL-WR340G/TL-WR340GD54M Wireless Router User Guide 
 56
)
 Note: 
The current configuration will be covered with th e uploading configuration file. The restoration 
process lasts for 20 seconds and the router will  restart automatically. Keep the router on during 
the restoring process, to prevent any damage. 
3.12.5 Reboot 
This page (shown in Figure 3-60) allows you to reboot the router. 
 
Figure 3-60 Reboot the router 
Click the  Reboot button to reboot the router. 
Some settings of the router will...

TL-WR340G/TL-WR340GD54M Wireless Router User Guide 
 57
It is recommended strongly that you change the 
factory default user name and password of the 
router. All users who try to access the routers Web-based utility or Qu ick Setup will be prompted 
) Note: 
The new user name and password must not exc eed 14 characters in length and must not include 
any spaces. Enter the new Pa ssword twice to confirm it. 
Click the 
Save button when finished. 
Click the 
Clear All  button to clear all. 
3.12.7 Log...

TL-WR340G/TL-WR340GD54M Wireless Router User Guide 
 58
 
Figure 3-63 Statistics 
¾ 
Current Statistics Status -  Enable or Disable. The default val ue is disabled. To enable, click 
the  Enable  button. If disabled, the f unction of DoS protection in Security settings will be 
ineffective. 
¾  Packets Statistics Interval -  The default value is 10. Select a value between 5 and 60 
seconds in the pull-down list. The Packets Statisti c interval indicates the time section of the 
packets statistic. 
¾...

TL-WR340G/TL-WR340GD54M Wireless Router User Guide 
 59
Appendix A:  Glossary 
Access Point -
 A device that allows wireless-equipped computers and other devices to 
communicate with a wired network. Also us ed to expand the range of a wireless network. 
Ad-hoc Network - An ad-hoc network is a group of co mputers, each with a wireless adapter, 
connected as an indepen dent IEEE 802.11 wireless LAN. Ad- hoc wireless computers operate on 
a peer-to-peer basis, communicating directly with  each other...

TL-WR340G/TL-WR340GD54M Wireless Router User Guide 
 
 60
Appendix B:  Specifications 
General 
Standards and Protocols IEEE 802.3,IEEE 802.3u, 
IEEE 802.11b and IEEE 802.11g 
TCP/IP, PPPoE, DHCP, ICMP, NAT, SNTP 
Safety & Emission FCC、CE 
Power Supply 9V~ 0.8A 
LEDs Power, SYS, WLAN, WAN, 1-4 
Ports One 10/100M Auto-Negotiation WAN RJ45 port, Four 10/100M 
Auto-Negotiation LAN RJ45 por ts supporting Auto MDI/MDIX 
Wireless 
Modulation IEEE 802.11b: DQPSK, DBPSK, DSSS, and CCK 
IEEE 802.11g: BPSK, QPSK,...

TL-WR340G/TL-WR340GD54M Wireless Router User Guide 
 
Appendix C: FAQ 
1.  How do I configure the router to access Internet by ADSL users? 
1)  First, configure the ADSL Modem configured in RFC1483 bridge model. 
2)  Connect the Ethernet cable from your ADSL Modem to the WAN port on the router. The 
telephone cord plugs into the Line port of the ADSL Modem. 
3)  Login to the router, click t he “Network” menu on the left of  your browser, and click WAN 
submenu. On the WAN page, select “PPPo E” for WAN...

TL-WR340G/TL-WR340GD54M Wireless Router User Guide 
 62
register, login to the router and click the Net
work menu link on the left of your browser, 
and then click MAC Clone submenu link. On  the MAC Clone page, if your PC’s MAC 
address is proper MAC address, click the C lone MAC Address button and your PC’s 
MAC address will fill in the WAN MAC Addr ess field. Or else, type the MAC Address 
into the WAN MAC Address field.  The format for the MAC Address is 
XX-XX-XX-XX-XX-XX. Then click the Save butto...

TL-WR340G/TL-WR340GD54M Wireless Router User Guide 
 63
5.  I want to build a WEB Server on the LAN, what should I do? 
Because the WEB Server port 80 will interfere 
with the WEB management port 80 on the router, 
you must change the WEB management port number to avoid interference. 
To change the WEB management port number: Login to  the router, click the “Security” menu on 
the left of your browser, and click Remote Management subm enu. On the Remote 
Management page, type a port number except 80,...

TL-WR340G/TL-WR340GD54M Wireless Router User Guide 
 
 64
Appendix D:  Contact Information 
For help with the installation or operation of
 TP-LINK Product, please visit our website. 
http://www.tp-link.com