TP-Link Router 4-Port Cable/DSL Broadband User Manual

4-Port Cable/DSL Broadband Router Use’s Guide 
 
6. Press OK to close the Local Area Connection Properties window 
 
 
Figure 3-5 
 
3.4 Windows XP 
Please follow the steps below to setup your computer: 
1. Go to Start Æ Settings  Æ Control Panel 
2. Click Network and Internet Connections 
 
 
Figure 3-6 
11   

4-Port Cable/DSL Broadband Router Use’s Guide 
 
3. Click Network Connections 
 
 
Figure 3-7 
 
4. Highlight the icon Local Area Connection, right click your mouse, click 
Properties  
 
 
Figure 3-8 
 
5. Highlight Internet Protocol (TCP /IP), and then press Properties button 
12  

4-Port Cable/DSL Broadband Router Use’s Guide 
 
 
Figure 3-9 
 
6. Choose Obtain an IP address automatically and Obtain DNS server address 
automatically, and then press OK to close the Internet Protocol (TCP/IP) 
Properties window 
 
 
 
Figure 3-10 
 
13  

4-Port Cable/DSL Broadband Router Use’s Guide 
7. Press OK to close the Local Area Connection Properties window 
 
 
Figure 3-11 
 
 
 4  Configuring the Router 
Before you configure this device, note that when the Broadband Router is configured 
through an Ethernet connection, make sure  the host PC must be set on the IP 
subnetwork that can be accessed by the  Broadband Router. For example, when the 
default network address of the Broadband Router Ethernet interface is 192.168.10.x, 
then the host PC...

4-Port Cable/DSL Broadband Router Use’s Guide 
 
 
Figure 4-1 
 
NOTE: 
By default the user name is “guest” and  the password is “guest”. For security 
reasons it is recommended that you change  the password as soon as possible (In 
Login ID & Password Setup). 
 
This router provides web browser m anagement mode. Login the Router, The HOME 
page screen below will appear. The Home Page is divided into eight sections, Status 
WAN Setup, LAN Setup, Routing,  NAT, Fire Wall, DDNS and MISC.   
The left hand...

4-Port Cable/DSL Broadband Router Use’s Guide 
 
Extended menu Submenu 
Function 
 
Figure 4-2 
 
4.1 Status   
When finish configuring the WAN/LAN Setup, the Status screen will list up the 
connection status for the Br oadband Routers WAN/LAN interfaces, firmware version 
numbers. 
 
 
 
 
 
 
 
 
 
 
 
 
 
16  

4-Port Cable/DSL Broadband Router Use’s Guide 
 
 
Figure 4-3 
 
4.1.1 Statistics
View the statistics of packets sent and received on WAN interface. 
 
 
Figure 4-4 
 
z  Refresh. Update data monitor table to display newest data. 
 
4.2 WAN Setup 
Users can setup the Internet connection mode for their local area network on this 
17  

4-Port Cable/DSL Broadband Router Use’s Guide 
page. Router provides four types of connection modes:  Dynamic IP (obtain an IP 
automatically), PPPoE User  (ADSL), Static IP User and PPTP. These types are 
listed in the screen for the Internet C onnection Type setting of the WAN Setup 
section. Users can choose the corresponding connection mode according to their 
situation. The default setting for Router is Dynamic IP.   
 
 
Figure 4-5 
 
When finished making your changes on this  screen, click the...

4-Port Cable/DSL Broadband Router Use’s Guide 
box. 
z  Click “Apply” button then finish of setting. 
 
 
Figure 4-6 
 
NOTE:  
Some ISPs may require you to register  the MAC address of your card/adapter .So 
It is recommended that the PC registered wi th the ISP is used to setup the MAC 
Address Clone. 
 
When finished making your changes on this  screen, click the Save button to save 
these changes. 
 
4.2.2 For PPPoE Setting 
z   Select “PPPoE User (ADSL)” button. 
z  PPPoE Account and PPPoE...

4-Port Cable/DSL Broadband Router Use’s Guide 
Router to automatically re-establish your connection as soon as you attempt to 
access the Internet again. If you wish to activate Connect on Demand, click the 
“Connect” button. If you want your Internet  connection to remain on at all times, 
You can check the Connect to Internet automatically checkbox. The default 
setting for Router is Connect to Internet automatically. 
z   Click “Apply” button then finish of setting. 
 
 
Figure 4-7 
 
When finished...