Toshiba W-627 Manual

11
PREPARATION
VHF  UHF
VHF/UHF
L RCHOUT(TO TV)
IN(FROM ANT.)LINE
OUTLINE
IN 1
VIDEOAUDIO
34RF
OUT(TO TV)
IN(FROM ANT.)
RF
Antenna/VCR/TV Connection
1Disconnect the antenna cable from your TV and connect it to the RF IN terminal on the
VCR.
2Connect the RF OUT terminal to the TV.
AUDIO/VIDEO Connections
The AUDIO/VIDEO jacks are also available to connect your TV.
When connected your TV using the
AUDIO/VIDEO OUT jacks
To watch video pictures, set the video input mode
on your TV.  For the video input mode,...

12
This set-up will enable you to:
–watch an unscrambled or scrambled channel
while recording it.
–record any channels through the cable box.
You will need to:
•set TV channel 3 or 4 to receive video signals.
(See page 11.)
•set VCR channel to the output channel of the
cable box, and select a desired cable channel
on the cable box.
•while the VCR is turned off or the “VCR”
indicator is not lit in the VCR display, set TV
channel to the output channel of the cable box.
This set-up will enable you to:...

13
PREPARATION
Auto Set Up
The VCR’s clock and tuner channels are set automatically when the VCR is plugged into the AC outlet.
PREPARATION
Auto Set up
1Plug the VCR into the AC outlet
2“Auto” blink while the VCR automatically sets the clock using
the data broadcast by the local TV stations.
While “Auto” is blinking, channel memory is also set
automatically.
3When Auto set up has been completed, the VCR is on
standby mode.
Notes
•It may takes several minutes during the Auto set-up
•Press 
CANCEL on the...

14
Optional settings on the SET UP screen
Other optional settings can be made.  Press ENTER while “SET UP” is selected on the MENU screen.
The screen turns to the SET UP screen.
To exit, press 
PROG. once.
Setting the Language
1Press POWER to turn on the VCR.
2Press PROG..
The following screen appears on the TV.
PREPARATION
Initial Settings Using On-screen Display
The language selection and clock setting must be set first when VCR is first plugged in or after it
encounters a power failure.
Preparation...

15
PREPARATION
8Press ENTER to start the “AUTO” clock
set feature.
After the VCR is turned off, it automatically
updates the clock using the data broadcast
by the local TV stations.
*The clock is
  revised by
  broadcasting
  signal at 8:00 A.M
  every morning.
9Select the options using FF or REW.
Change the data using 
PLAY/x2 or
STOP.
1) Set “SUMMER TIME
(Daylight-Saving Time)”.
DST start: Daylight-saving time begins on
the first Sunday in April. Because the
clock automatically changes from 2:00 AM
to...

16
Incoming Antenna/Cable(CATV) Signals
The VCR scans through all receivable TV and CATV channels and stores only the active
ones in your area into the memory.  Once the storing is finished, you can select a desired
channel using 
CH/TRK.
Preparation
•Turn on the TV, and select the video channel (3 or 4), or the video input mode if you made the Audio/Video
connection (page 11).
•Press 
I.SELECT so that the channel number will appear if “L1” or “L2” is displayed in the VCR display.
Incoming...

17
PREPARATION
To add channels
To erase channels
Channel reference chart
Number on the VCR
Corresponding channel numberTV
CATV STD (HRC/IRC)             CH NUMBER 1 2 3 456789
–23456789
1(A-8)2345(A-7) 6(A-6)789
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
10 11 12 13 A B C D E F G H I J K L M N O P Q
31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50...

18
Video Cassette Use
Loading a cassette
Push the cassette into the cassette compartment with the window side facing up and the
label side towards the front.  The VCR is automatically turned on.  The            indicator will
appear in the VCR display.
Ejecting a cassette
Press EJECT.  The cassette is ejected from the cassette compartment.
Warning
Do not insert your hands or any foreign objects into the compartment.  This may result
in injury or damage.  Take special care with children to avoid...

19
PLAYBACK
Adjusting the tracking
When playback starts, the VCR automatically adjusts the tracking for clear pictures and sound
(Digital Auto Tracking).
If the VCR cannot locate the best possible tracking point, hold down one of 
CH/TRK to adjust the
tracking manually.
Notes
• During the adjusting, the playback picture and sound may be distorted.
• The digital auto tracking is activated only in the playback mode.
• The noise on the screen may not be completely eliminated depending on the tape used,...

20
PLAYBACK
Variable Speed Playback
You can play back a tape at various tape speeds.
Picture Search
A tape runs at 5 times or 7 times the normal playback speed so
that you can quickly locate a particular scene.
1Press FF or REW during playback.
The tape runs at 5 times the normal playback speed.
2To change the tape speed to 7 times the normal playback
speed, press and hold 
FF or REW.
If you release it, the tape speed returns to 5 times.
Note
If you press FF or REW during picture search, the mode changes...