Toshiba Tecra 9000fru Maintenance Manual

FIELD REPLACEABLE UNIT DOCUMENTATION9000 Series  TecraGENERAL INFORMATIONTMBefore attempting any of the following procedures,
make sure that the main battery and AC adaptor is 
 not connected to the unit and the environment in
which you are working on is protected from
Electro-Static Discharge(ESD).FIELD REPLACEABLE UNIT DOCUMENTATION9000 Series  TecraGENERAL INFORMATIONTMBefore attempting any of the following procedures,
make sure that the main battery and AC adaptor is 
 not connected to the unit and...

FIELD REPLACEABLE UNIT DOCUMENTATION  TecraTM9000 Series
TOSHIBA
Tough Enough for Today’s World.         TABLE OF CONTENTS:
1. BATTERY PACK REMOVAL
2. OPTIONAL PC CARD REMOVAL
3. SELECT BAY REMOVAL
4. CD-R/W/DVD-ROM DRIVE DISASSEMBLY 
5. MEMORY MODULE REMOVAL
6. BLUETOOTH CARD REMOVAL
7. HDD REMOVAL
8. KEYBOARD REMOVAL
9. MODEM BOARD REMOVAL
10 WIRELESS LAN CARD REMOVAL
11. TOP COVER REMOVAL
12. COOLING MODULE REMOVAL
13. CPU REMOVAL
14. MICROPHONE REMOVAL
15. SD/SOUND BOARD REMOVAL
16. RTC BATTERY...

TOSHIBA
Tough Enough for Today’s World.OPTIONAL PC CARD REMOVAL1. Press the eject button for the PC card you want to
    remove.2. Press the extended eject button to pop the PC Card
    out.3. Grasp the PC card and remove it.SELECT BAY REMOVAL1. Turn the computer upside down.
2. Slide the release lever in the direction of the arrow.
3. Pull out the select bay device in the direction of the
    arrow.
FIELD REPLACEABLE UNIT DOCUMENTATION  TecraTM9000 SeriesBATTERY PACK  REMOVAL1.  Turn the computer upside...

MEMORY MODULE REMOVAL1. Turn the computer upside down. 
2. Remove two M2.5x2.8 silver flat head screws
    and remove the memory cover.TOSHIBA
Tough Enough for Today’s World.
FIELD REPLACEABLE UNIT DOCUMENTATION  TecraTM9000 SeriesMemory clipsMemory cover3. Spread the memory clips outward and pull the 
    memory module out of the connector on a
    45 degree angle.BLUETOOTH CARD REMOVAL1. Remove one M2x4 black security torx screw securing 
    the bluetooth cover.2. Lift out the bluetooth cover.3....

  HDD  REMOVAL5. Remove four M3x4 brass flat head screws securing
    the HDD to the bracket and lift the drive out of the    bracket.
6. Unplug the HDD connector from the drive.TOSHIBA
Tough Enough for Today’s World.
FIELD REPLACEABLE UNIT DOCUMENTATION  TecraTM9000 Series
4. Unfold the plastic tab and pull to remove the HDD
    from the bay.
        HDDHDD 
bracket1. Turn the computer upside down.
2. Remove one M2.5x8 silver screw securing HDD cover.
3. Remove the HDD cover.  HDD  REMOVALHDD...

4. Remove two M2.5x2.8 silver screws securing the
    keyboard. M2.5x2.8 silver screwsLatchFIELD REPLACEABLE UNIT DOCUMENTATION  TecraTM9000 SeriesKEYBOARD REMOVALKEYBOARD REMOVAL2. Turn the computer right side up and open the display
    panel.3. Using the case separator, unlatch the keyboard holder
    at the top of the keyboard.Keyboard holderKeyboard 5. Lift out the keyboard and set it as shown above(Place
    an insulator between the keyboard and the LCD to    prevent scratches on the LCD).6....

WIRELESS LAN CARD REMOVAL1. Remove one M2x4 security torx screw securing 
    the mini PCIcover and lift out the cover.Mini PCI coverM2.5x4 security torx screw2. Disconnect the black and white coax from the
    wireless LAN card.3. Spread the Mini-PCI connector clips and pull the 
    Wireless LAN card out of the connector about 
   45 degree angle.TOSHIBA
Tough Enough for Today’s World.
FIELD REPLACEABLE UNIT DOCUMENTATION  TecraTM9000 SeriesBlack coax cableWhite coax cableWireless LAN cardMini-PCI...

COOLING MODULE REMOVAL1. Remove the glass tape securing the fan cable and 
    disconnect the cable from PJ770 on the top board.
2. Remove four M2x10 black flat head screws securing
    the cooling module.3. Lift out the cooling module.TOSHIBA
Tough Enough for Today’s World.
FIELD REPLACEABLE UNIT DOCUMENTATION  TecraTM9000 SeriesPJ770Glass tapeFan cableCooling 
moduleM2.5x10
black flathead screwsCPU REMOVAL1. Peel off the thermal conductor.
2. Insert a flat head screwdriver and rotate it...

TOSHIBA
Tough Enough for Today’s World.
FIELD REPLACEABLE UNIT DOCUMENTATION  TecraTM9000 SeriesRTC BATTERY REMOVAL1. Disconnect the power cable from PJ801 on the top PCB.
2. Remove two M2.5x4 brass screws and one M2.5x16
    black screw securing the top PCB.
3. Gently lift up the right side of the top board to disconnect    from PJ19 on the top PCB.TOP PCB REMOVAL4. Remove the PC card slot from PJ117 on the top PCB.
5. Disconnect the following cables from the top PCB:    -Sound interface cable from...

MEMBRANE SWITCH REMOVAL1. Remove three M2.5x3 flat head silver screws
    securing the membrane switch.
2. Lift out the membrane switch assembly.FIELD REPLACEABLE UNIT DOCUMENTATION  TecraTM9000 Series
TOSHIBA
Tough Enough for Today’s World.1. Remove four M2.5x4 brass screws securing the left 
    and right speakers.2. Lift out the speakers.  BOTTOM PCB REMOVAL1. Disconnect the battery harness from PJ18 on the
    bottom PCB.2. Remove five M2.5x4 brass screws securing the bottom
    PCB.3. Lift out the...