Toshiba Tdp Tw95 Projector User Manual

41
Operations
40
■The default setting menuThis menu shows placement status and other settings.
Description
Item
(Rear 
ceiling)
(Standard)
(Rear) (Ceiling)
On            Off
Standard           High
Yes           No
 Off           On  Low           Standard Sets projection mode in accordance with Placement Style.  
Set the time to wait for the power to be turned off after the last 
operation is made with no input signal.
Off (not turned off)            30 min.
Set whether the input with signals is only...

43
Operations
42
Using the menus (Continued)
[Wireless standby]When [Wireless standby] is set to [On], the wireless LAN is switched to the standby
state as the projector enters standby. While the wireless LAN is in standby, the
projector can be powered on using the remote control function of the Wireless Utility.When [Wireless standby] is set to [Off], the projector cannot be powered on with
the remote control function of the Wireless Utility.[Remote control]Sets a remote control code from 4 types. You...

45
Operations
44
■Displaying Information (Status display)
This displays information about the input signal, lamp use time, etc.
“Yes”: displayed, “No”: not displayed
Item Description
Computer Y/P
B/PRVideo S-video
Wireless/USB
ProjectorInput Input source name Yes Yes Yes Yes YesMode name RGB input mode 
[Note 1]
Ye s N o N o N o N o
Resolution Resolution (in dots) Yes No No No NoFrequency Sync frequency Yes No No No NoSync Sync signal polarity 
[Note 2]
Ye s N o N o N o N o
Signal format Y/P
B/PR signal...

47
Operations
46
◆ Infrastructure communication mode
A mixed wireless and wired LAN can be created
via wireless LAN access points. (Communication
between wireless LAN devices is also allowed.)
Connecting to the rest of the world via a wired
LAN or the Internet generally requires a high level
of security.
Use the appropriate transmission mode for your network environment.
■Caution when using the wireless LAN functions
The Wireless LAN in this unit uses the 2.4 GHz waveband.  If there is a similar...

49
Operations
48
Setting up the wireless LAN (Continued)
■Setting Wireless Utility
If you select Wireless Utility, the following items can be set.
[Yes            No]     [Enter:      ]
Mode: Ad hoc            Infrastructure
Standards: IEEE802.11b            IEEE802.11g
Channel: Select a number (1 to 11) using the            buttons.
SSID: Specify a desired character string (1 to 32 characters).
[           : Move left or right one character.]     [       to       : Set a character.]
Encryption: On...

51
Operations
50
Setting up the wireless LAN (Continued)
This is an ID code for connecting to specific individuals over a wireless LAN.  This may
also be called “Network group” or “Network name”.  Please read the following carefully.Note 1: The SSID is set to TDPJ when shipped from the factory. If you leave this
setting as it is, security may be compromised due to access by a third party
using the “Wireless Utility” within the projector’s possible communication area.
Before using the projector,...

53
Operations
52
■Computer settings
Refer to instruction manuals of your computer or wireless LAN adapter to perform the
following settings.
•Select Ad hoc (for some wireless  LAN adapters, this is Peer-to-Peer Group).
•[Channel] : You may need to set channels depending on the wireless LAN adapter being
used. Make the [Channel] settings identical to the computer settings.
•Set SSID (for some types of wireless LAN adapter, use Network name instead) as the
same as projector’s SSID (at factory shipment,...

55
Operations
54
■Setting slideshow options
Slideshow is the function to display the JPEG image files stored in a USB memory one
after another at fixed time intervals. When switching from one image to the next,
Slideshow can add various display effects (transitions) to them. If you select Slide
Show, the following items can be set.
Description Item
Auto. demo
Interval
Display effect
Play icon
Thumbnail 
displayOn           Off  (Select whether to automatically start a slide show 
when a USB memory is...

57
Operations
56
Projecting images stored in a USB memory (Continued)
Indicates that there is no data to
be displayed in the folder.Indicates that an unsupported
JPEG or other file is present.
Indicates that only folders are
inside the folder.Indicates that the JPEG or other
file is not supported.When the Thumbnail display is
set to Off, the screen appears
like this. •[Interval]
You can set the display interval of time (in seconds or minutes) for slide shows to be
played automatically.
•[Display effect]...

59
Operations
58
Projecting images stored in a USB memory (Continued)
5
Rotating a slidePressing the 
 
 buttons with a slide displayed rotates the slide 90 degrees. The
rotation information is preserved as long as you remain in the current folder.
(
: Rotate left; 
: Rotate right. These buttons are not available during an automatic
play.)
Notes
•The thumbnail display order and slide order goes in order from shortest file name to
longest. If two file names have the same number of characters, they are...