Home > Toshiba > Projector > Toshiba Tdp Tw420u Projector User Manual

Toshiba Tdp Tw420u Projector User Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Toshiba Tdp Tw420u Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 51
    Add page 51 to Favourites
    image text
    Enable zoom 
    							
100
CONTROL terminal
Pin assignment
Pin No.Signal NameDescription
D sub 9 pin connector
1DCDData carrier detect
TXDSending data
RXDReceiving data
4DTRData terminal ready
5GNDSignal ground
6DSRData set ready
7RTSRequest to send
8CTSConsent to send
9DC 5 V5 VDC OUTPUT
Interface format
1. Communication method   RS-C, 9600 bps, No Parity, Data Length: 8 bits;  
Stop Bit Length: 1 bit
. Communication format   
STX (0 h)  Command ( Byte)  ETX (0 h)
  Only 1 command valid per communication.
. Data format    
For input commands, only ASCII-compliant all-
uppercase alphanumeric characters supported.
4. Replies  Acknowledge   
ACK (06 h)  CR(0 Dh) Data
 ... Normally ended
     
ACK (06 h)  ESC(1 Bh) ... Aborted
  No acknowledge   
NAK (15 h)
If commands are to be sent consecutively, wait for the response from the projector 
before sending the next command.
Main Commands
ItemCommand
Power onPON
Power offPOF
Icon display onMO0
Icon display offMO1
Auto setting (RGB input)PAT
Status display onDON
Status display offDOF
 Note
Contact your dealer for control cable and other commands.




•
Specifications (Continued)
    All Toshiba manuals Comments (0)

    Related Manuals for Toshiba Tdp Tw420u Projector User Manual