Toshiba Tdp Tw420u Projector User Manual

40
41

Operations


 How to register user logo
1 Project a picture to register.
2 Select [User logo] in the Display setting menu, and press the  or 
 button.
3 Select  from the displayed menu list and press 
the  button.
4 The registration area is displayed for confirmation. Select [OK] 
and press the  button.
If the registered picture does not fall within the display area, operate the 
computer to scroll the screen.
5 Registration starts.
A message will appear after the registration has been...

42
43

Operations

Using the menus 1 (Continued)
Default setting 2 menu
Item  Description
Projection modeSets projection mode in accordance with Placement Style. p.21
 (Standard)   (Rear)   (Ceiling)   (Rear ceiling)
Fan modeSets the cooling fan speed.  Standard  High
Remote controlWhen 2 projectors are used and controlled by the remote control respectively, this menu sets the code for the projector and the remote control.
[ or : Enter setting]  [: Select from 1, 2]  [: Confirm]   [:Select OK to...

44
45

Network andUSB memory

Before connecting via network
Check your computer’s OS before you connect a projector with your 
computer via network. 
This projector supports the Network Projector function of Windows Vista® features.
If your computer’s OS is Windows Vista® and  you intend to use the Network Projector 
function for network connection, see “Connection using the Network Projector (Windows 
Vista®)” p.44, “Setting up the Network Projector/Network Utility” p.49 and “Using the 
Network...

4647
Network andUSB memory
How to use the USB terminal
This projector can connect with a commercial USB memory and a USB memory card 
reader/writer that are USB.0 compliant, a digital camera or the like and display the JPEG 
and MPEG files saved in those devices. p.47
(Toshiba does not guarantee the operation of all USB .0-compliant devices.)
To connect or disconnect a USB device, use the following procedure:
Connecting USB device
Plug the USB device.
Make sure the orientation is correct then...

48
49

Network andUSB memory

Setup using the Setting display (2)
 
Projector settings (Be sure to read this subsection.)
Using the factory settings as-is may suffer security damage, so be sure to change 
the projector settings.
1. Press the NETWORK button and press the MENU button twice 
2. Select a Category 
3. Make settings 
Select a category by using 
           . 
The following 5 categories are available: 
Displays the current settings 
of selected category. 
Item shown in gray cannot 
be set with...

50
51

Network andUSB memory

CategoryItem  Description
 Appli-cationRemote controlSpecify whether to allow the remote control of the projector from a computer.
 Allowed  Presentation  Forbidden
Allowed:  The projector always accepts remote commands from a computer.
Presentation:  Accepts only the remote commands from the computer by which an image is projected on the projector (Update automatically) using Network Utility.
Forbidden:  Always ignores any remote commands from a computer.
WEB browser...

5
5

Network andUSB memory

 [Security for wireless LAN settings]

Set the authentication to enhance network security. Select a method identical to that of 
wireless LAN terminal to be connected with.

Set Encryption according to the setting you made for Network authentication, as 
follows.
When you have set Network authentication to Open or Shared, select WEP for 
Encryption.
When you have set Network authentication to WPA-PSK/WPA2-PSK, select TKIP or 
AES for Encryption.
Note:  
Network...

54
55

Network andUSB memory

 Note
If you select [Network Projector] in the Setting display (2) menu, the same items 
in [Network Utility] will be displayed except for the following  items.
1 [Easy Connect (USB memory)] feature is not available.
 In the item [Application], [Password] and [Disconnect] are available as 
follows.
CategoryItem  Description
 ApplicationPasswordSet password  On  Off
DisconnectDisconnect while transferring an image using Network Projector.[Yes  No]  [Enter: ]
See...

56
57

Network andUSB memory

 Precautions
When purchased,  is set to [Off] and  is not set 
by factory setting. You are recommended to make authentication setting as soon as 
possible.
If you forget a passwork, set it again.
[Wireless network]
If you set Wireless network to Disabled, the wireless LAN connection will be unusable.
Set Wireless network to Disabled when you do not wish to use the wireless LAN for 
network connection.
 Note
The Email function does not support transmission to the SMTP server...

58
59

Network andUSB memory

Common
[Play icon]
The slideshow icon can be displayed.
Standard
The projector handles the slideshow icon as follows depending on the “On/Off” setting 
of Icon on the projector’s menu.
Icon On:  The projector displays the icon upon the start of playing a slide show and 
turns it off after a few seconds.
Icon Off :  The projector does not display the icon.
Continuous
The projector keeps the icon displayed during the slide show.
[Thumbnail display]
Select the form of a...