Toshiba Tdp Tw300u Projector User Manual

41
Operations
40
■The display setting menuUse this menu to set screen display-related items.
(The items in gray color cannot be set with the current input selection.)
(Full):  Display with 1024 × 768 dot resolution
(Thru): 
Display with sampling resolution (for computer input only)
(Wide):  Wide-screen display
Select one of the languages below to use for displaying the menu and messages[      or      : Enter setting mode]     [          :Selection]      [Apply:       ]...

43
Operations
42
Sets background color when [Center] is selected for the logo display mode.You can preview the registered logo.You can reset the registered logo, display style and background  to the factory
setting. (The logo set for the start-up screen and background is reset.)
[Background]•TOSHIBA is set for [Logo] by factory setting.
•If user’s logo has been registered, it is displayed when [Logo] is set for
background.[Start-up screen]If user’s logo has been registered and this setting is [On], the...

45
Operations
44
[Auto input search][On]: Automatically searches the signals that can be
projected, and switches input from the connected device
that outputs the signals each time the INPUT button is
pressed. The input from the connected device that
outputs no signals is skipped.
[Off]: Displays the Input select menu.
Toggle with 
 
 buttons and press 
 button. (The
input without signals can be selected.)
[Power on]Note that if [Power on] is set to [Auto], then if the main power
switch is ON when power...

47
Operations
46
: For dividing the network, the subnet mask determines the range
of an IP address assigned to a terminal. (Example: 255.255.xxx.xxx)
: Gateway specifies a network device like a router when accessing a
server outside the network. It is identified by an IP address. (Example:
111.112.xxx.xxx)[Email]: Sends alarm information to the specified E-mail address
when an error such as lamp blowout occurs.
: Set an IP address of the SMTP server.
: Enter a port number of the SMTP server.
: Enter...

49
Operations
48
Using the menus (Continued)■Displaying Information (Status display)
This displays information about the input signal, lamp use time, LAN connection status,
etc.
“Yes”: displayed, “No”: not displayed
Item Description
Computer
Y/P
B/PR
Video
Wireless/
USB
S-video Card
memory
ProjectorInput Input source name Yes Yes Yes Yes YesMode name RGB input mode 
[Note 1]
Ye s N o NoNoNo
Resolution Resolution (in dots) Yes No No No NoFrequency Sync frequency Yes No No No NoSync Sync signal polarity...

51
Operations
50
Setting up the wireless LAN■Functions
The following functions are available via wireless communications, when the wireless LAN
PC card and dedicated Wireless Utility software 
p.66
 included with this projector are used.
Note: A wireless LAN PC card except the supplied one (or recommended by
Toshiba) does not work with this product.  Please ask your dealer about the
available wireless LAN PC card.
1) Displaying a computer’s screen via the projector
The computer’s desktop screen can be...

53
Operations
52
Setting up the wireless LAN (Continued)
■Setup using the Setting display (2)●Projector settings (Be sure to read this subsection.)
The factory settings can be used as-is. However, if you need higher security, the
projector settings should be changed.1. Press the MENU button twice
2. Select a Category
3. Make settingsSelect a category by using
           .
The following three categories 
are available:Displays the current settings 
of selected category.
Item shown with gray cannot 
be set...

55
Operations
54
Setting up the wireless LAN (Continued)
●Details on individual items•[Easy Connect (USB)]
This feature allows users to easily connect the projector to a computer over wireless
networks, without making network settings via Wireless Utility.
•[Network settings]

Your projector is set to Ad hoc in the factory. Change the setting if you want to use the
projector in Infrastructure mode.

Usually, you do not have to set this item. If a network group having the same SSID
already exists in the...

57
Operations
56
■Computer settings
Refer to instruction manuals of your computer or wireless LAN PC card to perform the
following settings.
•Select Ad hoc (for some PC cards, this is Peer-to-Peer Group).
•You may need to set channels depending on the wireless LAN PC card being used. Make
the [Channel] settings identical to the computer settings.
•Set SSID (for some types of PC card, use Network name instead) as the same as
projector’s SSID (at factory shipment, this is set to TDPJ).
•If Encryption and...

59
Operations
58
Projecting images stored in a memory PC card or USB memoryThis projector can read JPEG files stored in a memory PC card or USB memory and
display them on the screen.
This allows you to give presentations without a computer, create an advertising screen
board using the slideshow function, and more. (The projector cannot reproduce animation
effects such as those produced by Microsoft
® PowerPoint
®.)
■Memory PC cards●PC card slot types
The PC card slot installed on this projector is TYPE...