Toshiba Tdp T95 Projector User Manual

21
20
Preparations
Placement StylesAs shown in the figures below, this device can be placed in 4 different styles.
The factory setting is “floor-mounted front projection.” Set the [Projection mode] in the
Default setting  menu 
p.40
, in accordance with your needs.
Placement
 WARNING
•Always obey the instructions listed in IMPORTANT SAFETY INSTRUCTIONS when placing the unit.
Attempting to clean/replace the lamp at a high site by yourself may cause you to drop down, thus
resulting in injury.
• If you wish...

23
22
Preparations
p.52
A udio amplifier, etc. DVD video recorder, etc. Video recorder,
D VD player, etc.
Video recorder, etc.
Conversion
adapter BNC-pin
(not supplied)
Monitor cable Mini
D-sub 15P-BNC
(not supplied)
To  audio input
White (L)/Red (R) To
 audio
output
White (L)/
Red (R)
AV   cable
(not supplied)S-video cable
(not supplied)To  S-video
output
To  video
output
Before connection• Read the owner’s manual of the device you are connecting to the projector.
• Some types of computer cannot be used...

25
Operations
24
Notes
•The start-up screen will disappear after a moment. You can dismiss the star t-up screen
before this by performing any operation. You can also configure the start-up screen not to
appear via the Display setting menu 
p.37
.
•The first time you use the projector after purchase, after the start-up screen disappears,
the start menu is displayed 
p.26
.
•When [Key lock] is [On], the operation buttons of the projector do not work 
p.41
.
•When [Password] is [On], enter password then the...

27
Operations
26
5
Projector placement angle adjustmentsThe placement angle and the height of the projected image can be adjusted by the foot
adjuster.qLift up the front of the projector to
the desired angle, then press the
foot adjuster release button.
The foot adjuster extends. Release the
button to lock the position.
wTo fine adjust the angle, twist the
foot adjuster.
eTo adjust the horizontal angle, use
the right and left tilt adjusters.•To stow the foot adjuster, hold up the projec-
tor while...

29
Operations
28
Adjusting Keystone distortion [Auto]2
Press the 
 button.
The keystone distortion is automatically corrected. The 
 icon appears during this
correction.
When adjustment is finished, the Keystone menu appears again. For fine adjust-
ment, select [V-keystone] by the 
 button and adjust image manually by the 
 buttons.
Adjusting Keystone distortion [Manual]1
Press the KEYSTONE button.
2
Select [V-keystone] by the 
 button.
3
Use the 
 
 buttons for keystone adjustment.
Note•Depending on the...

31
Operations
30
■Changing screen size
The screen size for the projected image can be changed.
Press the remote control’s SCREEN SIZE button.Pressing the button switches Full/Thru/Wide in turn.Notes•Thru display is available for computer-input images.
•[Screen size] of the Display setting menu has the same functionp.37
.
•If you use this function on commercial video software, broadcast
or cable-broadcasting except for the purpose of your private
viewing and listening, it may infringe the copyright...

33
Operations
32
How to cancel password (from [On] to [Off])
1
Select [Password] in the Default setting menu and press the 
 or 
button.The password entry screen is displayed.
2
Enter the password using numeric keys of the remote control.
3
The password cancel confirmation screen is displayed. ([OK] or
[Cancel])
4
Select [OK] and press the 
 button.
The [Password] is canceled and becomes [Off].Note•The password entry screen appears when the power is turned back on only after
the power cord is unplugged....

35
Operations
34
■The image adjustment menuUse this menu to set or adjust image-related items. Items that can be set or adjusted are
marked with “Yes”, and those that cannot are marked with “No”. (When an item is masked,
it indicates that you cannot select for the current input.)
Item 
  
Description
Computer Y/P
B/PRVideo
S-video
 
Contrast Adjust the image contrast. Yes Yes Yes Yes
Lower
Higher
Brightness Adjust the brightness of the image. Yes Yes Yes Yes
Darker
Brighter
Color Adjust the color of the...

37
Operations
36
■The display setting menuUse this menu to set screen display-related items.
(The items in gray color cannot be set with the current input selection.)
(Full):  Display with 1024 × 768 dot resolution
(Thru): 
Display with sampling resolution (for computer input only)
(Wide):  Wide-screen display
When projecting on a non-screen surface, select a color in accordance 
with the projecting surface.
Press      and switch with       and      .  
Off/Green/Black/Brown/Blue/Beige
Select one of the...

39
Operations
38
Notes•You can register a logo from computer input only.
•The area that can be registered is 512 × 384 dots at the center of the screen. To
register a company logo, prepare the image within the limit.
•Only one logo can be registered. When a new image is registered, the old one is
erased.
•The time needed to register or display the image varies depending on the data size.
•If you use this function on commercial video software, broadcast or cable-
broadcasting except for the purpose of...