Toshiba Tdp T80 Projector User Manual

20
21
Operations
p.41
Before connection•Read the owner’s manual of the device you are connecting to the projector.
• Some types of computer cannot be used or connected to this projector.
Check for an RGB output terminal, supported signal 
p.39
, etc.
•T urn off the power of both devices before connecting.
• The figure below is a sample connection. This does not mean that all of these devices
can or must be connected simultaneously. (Dotted lines mean items can be exchanged.)
Notes
•COMPUTER terminals 1...

23
Operations
22
1
Turn on the power.Tu rn on the power by following the instructions in “ Turning the power on ” 
p.21
.
2
 Select the language and the lamp power (When using the
first time).When the projector is used for the first time after purchase, menu for language and
lamp power selection and configuration is displayed in English. (If the screen is out of
f ocus, adjust it according to the step 
6.)
q Use the 
 or 
 button to select the
desired language and press the 
 button.
Message for setup...

25
Operations
24
■Using auto setting
This function sets up the projector to the optimum state for
each type of the input signal by using simple operations.1
Press the SET UP button.The Set up menu appears.
2
Press the SET UP button again.The displayed menu item is automatically adjusted/set.
For computer input, the 
 icon will appear during
processing.
For manual adjustment and setting, see the following table 
p.26
.
Note•The image may not be projected or auto adjustment/setting may not be performed...

27
Operations
26
■Cutting off the picture and sound temporarily (Mute)
When you want to project the images of another projector, overhead
projector, etc. temporarily, this projector’s images and sound can be
turned off.
Press the remote control’s MUTE button.The picture and sound are cut off. (The Mute function is released
when pressing the MUTE button again.)Notes•The 
 icon will appear while mute is in effect.
•Operating any other functions will also cancel the muting.
■Freezing the image (Freeze)
The...

29
Operations
28
■The image adjustment menuUse this menu to adjust image-related items.Items that can be adjusted are marked with  “Yes”, and those that cannot are marked with “No”.
Item    
  
Description
Computer
Y/P
B/PR
Video S-video
 
ContrastAdjust the image contrast. Yes Yes Yes Yes
Lower
Higher
BrightnessAdjust the brightness of the image. Yes Yes Yes Yes
Darker
Brighter
ColorAdjust the color of the image. No Yes Yes No
Lighter
Deeper
Tint 
*1
Adjust the tint of the image color. No No Yes No...

31
Operations
30
Using the menu (Continued)
■The default setting menuThis menu shows placement status and other settings.
Sets projection mode in accordance with Placement Style.  Set the timer to wait for the power to be turned off after signal input stops.Press      . Switch with       and      .
Off  (not turned off)/ 1 min./5 min. /10 min. /30 min. /60 min.
Set whether the input with signals is only selected or not.Sets whether to turn on the power when the  ON/STANDBY button is pressed 
(Manual), or...

33
Maintenance
32
About lampMaintenanceThe product’s light source is a mercury lamp that lights at increased internal pressure. Be sure
to fully understand the following characteristics of the lamp and handle it with extreme care.•The lamp may explode with a loud noise due to impact or deterioration, or fail to light at
the expiration of its life.
•How long it takes before the lamp explodes or the life expires may vary greatly by lamp.
Some may explode shortly after first use. (Free replacement is...

35
Maintenance
34
Used LampsThis projector’s lamps contain trace amounts of environmentally harmful inorganic
mercury. Be careful not to break used lamps, and dispose of them in accordance with
local regulations.
Lens and main unit cleaning
 WA R NING
•Request cleaning and maintenance of a ceiling-mounted unit from your projector dealership
.
Attempting to clean/replace the lamp at a high site by yourself may cause you to drop
down, thus resulting in injury.
■Lens cleaning•Clean the lens with a...

37
Others
36
If you think something is wrong, check the followings before contacting customer service.
Please see “Trouble indications ” 
p.36
 as well.
If  This Happens Check
No powerPo wer goes out
during useNo pictureNo audioPicture not
displayed
correctlyPicture blurred
Pa rt of picture
out of focusImage is darkColors too light
Bad shadingRemote control
doesn’t workBefore calling service personnel
• Is the power cord plugged in? Is it connected to the projector?
• Is the lamp cover loose? 
p.34
•Is...

39
Others
38
■List of supported signals (RGB signals)This projector supports the following RGB signals. Note, however, that depending on the
computer model, the screen may show flicker or streaking. Please adjust the projector if
this happens.
(Press the SET UP button, and adjust automatically or manually. 
p.25
, p.26
)
Resolution
720 x 400
640 x 480
800 x 600
832 x 624
1024 x 768
1152 x 864
1280 x 960
1280 x 1024
1400 x 1050
1600 x 1200Mode
720x400_85
VGA_60
VGA_72
VGA_75
VGA_85
SVGA_56
SVGA_60...