Toshiba Tdp T45 Projector User Manual

							41
Others
40
■List of supported signals (RGB signals)This projector supports the following RGB signals. Note, however, that depending on the
computer model, the screen may show flicker or streaking. Please adjust the projector if
this happens.
(Press the SET UP button, and adjust automatically or manually. 
p.27
, p.28
)
Resolution
720 x 400
640 x 480
800 x 600
832 x 624
1024 x 768
1152 x 864
1280 x 960
1280 x 1024
1400 x 1050
1600 x 1200 Mode
720x400_85 VGA_60
V GA_72
V GA_75
V GA_85
SVGA_56
SVGA_60
SVGA_72
SVGA_75
SVGA_85 MAC16
XGA_60
XGA_70
XGA_75
XGA_85 MAC19
SXGA1_75
QuadVGA_60
QuadVGA_85 SXGA3_60
SXGA3_75 SXGA+
UXGA_60
UXGA_65
UXGA_70
UXGA_75 Refresh rate
(Hz)
85.039
59.940
72.809
75.000
85.008
56.250
60.317
72.188
75.000
85.061
74.550
60.004
70.069
75.029
84.997
74.700
75.000
60.000
85.002
60.020
75.025
59.978
60.000
65.000
70.000
75.000 H-frequency
(kHz)
37.927
31.469
37.861
37.500
43.269
35.156
37.879
48.077
46.875
53.674
49.725
48.363
56.476
60.023
68.667
60.134
67.500
60.000
85.938
63.981
79.976
65.317
75.000
81.250
87.500
93.750 Clock
(MHz)
35.500
25.175
31.500
31.500
36.000
36.000
40.000
50.000
49.500
56.250
57.283
65.000
75.000
78.750
94.500
79.857
108.000
108.000
148.500
108.000
135.000
121.750
162.000
175.500
189.000
202.500Note
• Signals which resolution exceeds the native resolution (1024  × 768 pixels) will be
compressed. For this reason, some information may be lost, or image quality may be
affected.
Specifications■ List of general specifications
Item Specification
Consumption Power 260 WWeight 3.0 kg
External Dimensions 285 × 98  × 254 mm (W  × H  × D)(including protruding parts)Cabinet material* PC+ABS resin and ABS resinConditions for usage
 environment
Temp: 5 °C to 35 °C; relative humidity: 30% to 70%
Display pixels
1 chip DMD™
Picture elements
786,432 pixels (1024H  × 768V)
Lens Zoom lens      F=2.0-2.2   f=19.41-23.32 mmLamp High-pressure mercury lampProjection screen size 31-300 inchesProjection distance 1.26-10.50 mSpeaker 1 W (Monaural)
COMPUTER-1 terminal
Mini D sub 15 pin   RGB / Y/P
B/PR (dual use)
COMPUTER-2 terminal
Mini D sub 15 pin   RGB / Y/P
B/PR (dual use)
MONITOR terminal
Mini D sub 15 pin   RGB / Y/P
B/PR (dual use)
S-VIDEO terminal Mini DIN 4 pinAUDIO (L/R) terminal RCA Pin Jack  × 2, 1.5 V (rms), 22 k Ω or moreVIDEO terminal RCA Pin Jack, 1 V (p-p), 75  ΩAUDIO IN terminal ø3.5mm dia. stereo mini-jack, 1.5V (rms); 22 k Ω or moreAUDIO OUT terminal ø3.5mm dia. stereo mini-jack
CONTROL terminal Mini DIN 8 pin (RS-232C)
*Each plastic part displays the materials it is made from, in order to facilitate recycling after this
product becomes no longer usable.
Note
• Design, specifications, etc. subject to change without notice for improv\
ements, etc.Connection terminal 
						

							43
Others
42
■CONTROL terminal●Pin assignment
7
6
8
5 43
2 1
Signal Name
RXDCTS
DSR
GND RTSN.C
TXD
GND
Pin No.
1
2
3
4
5
6
7
8 Description
Receiving data
Consent to send
Data set ready
Signal ground
Request to send
No connection
Sending data
Signal ground
Mini DIN 8 pin connector
● Interface format
1 Communication method RS-232C, 9600bps, No Parity, Data Length: 8 bits;
Stop Bit Length:  1 bit
2 Communication format STX (02h)  Command (3Byte)  ETX (03h)
Only 1 command valid per communication.
3 Data format For input commands, only ASCII-compliant all-uppercase
alphanumeric characters supported.
4 Replies Acknowledge ACK (06h)  CR (0Dh)  Data ...  Normally ended
ACK (06h)  ESC (1Bh) ...  Aborted
No acknowledge NAK (15h)
If commands are to be sent consecutively, wait for the response from the projector
before sending the next command.
● Main Commands
Item Command
Computer (1) input select IN1Computer (2) input selectIN2Video input selectIN3
S-video input select IN4
Item Command
Power on PONPower off POFIcon display on MO0Icon display offMO1Auto setting (RGB input) PATStatus display on DON
Status display off DOFNote
•Contact your dealer for control cable and other commands.■ Separately Sold Product
Replacement Lamp Model TLPLV8
■List of supported signals (Y/P
B/P
R signals)
Signal format fh(kHz) fv(Hz)
480i(525i)@60Hz 15.73 59.94
480p(525p)@60Hz 31.47 59.94
576i(625i)@50Hz 15.63 50.00
576p(625p)@50Hz 31.25 50.00
720p(750p)@60Hz 45.00 60.00
720p(750p)@50Hz 37.50 50.00
1080i(1125i)@60Hz 33.75 60.00
1080i(1125i)@50Hz 28.13 50.00
1035i(1125i)@60Hz 33.75 60.00
1152i(1250i)@50Hz 31.25 50.00
■List of supported signals (Video, S-Video signals)
Video mode fh(kHz) fv(Hz) fsc(MHz)
NTSC 15.73 60 3.58PA L 15.63 50 4.43
SECAM 15.63 50 4.25 or 4.41 P AL-M 15.73 60 3.58
P AL-N 15.63 50 3.58
P AL-60 15.73 60 4.43
NTSC4.43 15.73 60 4.43
■ Pin assignment of COMPUTER-1/2 & MONITOR terminals
11
15 6
1
5
10
Input Signal
• RGB input
RGB signals: 0.7V (p-p) 75  ΩHorizontal sync signal
:TTL level (Pos/neg polarity)
Ve rtical sync signal: TTL level (Pos/neg polarity)
• Y/P
B/PR input
Y signal: 1.0V (p-p) 75  Ω
P
B/PR signals: 0.7V (p-p) 75  Ω
Pin Pin descriptionNo. During RGB input During Y/PB/PR input1Video signal (R) Color difference signal (PR)2Video signal (G) Luminance signal (Y)3Video signal (B) Color difference signal (PB)4GND ∗5GND ∗6GND (R) GND (P
R)
7GND (G) GND (Y)8GND (B) GND (P
B)
9N.C ∗10 GND ∗11 GND∗12 N.C∗13 Horizontal sync signal∗14 Vertical sync signal∗
15 N.C ∗
Specifications (Continued)
∗ Do not connect anything.
Mini D sub 15 Pin connector