Toshiba Tdp T40u Projector User Manual

Others
Maintenance
Operations
Preparations
Before Using
OWNER’S MANUAL
DA TA PROJECTOR
TDP-T40(XGA) 

Before Using
3
2
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended
to alert the user to the presence of uninsulated dangerous voltage within the products
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.- Reorient or...

Before Using
5
4
5. Heat
The product should be situated
away from heat sources such as
radiators, heat registers, stoves, or
other products (including
amplifiers) that produce heat.
6. Water and Moisture
Do not use this product near water.- for example, near a bath tub,
wash bowl, kitchen sink, or laundry
tub; in a wet basement; or near a
swimming pool and the like.
7. Cleaning
Unplug this product from the wall
outlet before cleaning.  Do not use
liquid cleaners or aerosol cleaners.
Use a soft cloth for...

Before Using
7
6
IMPORTANT SAFETY INSTRUCTIONS  (Continued)
15. Accessories
Do not place this product on an
unstable cart, stand, tripod,
bracket, or table.  The product may
fall, causing serious injury to a
child or adult, and serious damage
to the product.  A product and cart
combination should be moved with
care.  Quick stops, excessive
force, and uneven surfaces may
cause the product and cart
combination to overturn.
S3125A
16. Damage Requiring Service
Unplug this product from the wall
outlet and...

Before Using
89
If your line voltage is 220 to 240V, use one of the following types of cable.Plug
configurationPlug type
Australian
240V
10A
North American240V
15A Switzerland
240V
6A Line voltage
EURO
UK220 – 240V
220 – 240V200 – 240V
200 – 240V 200 – 240V
Plug
configurationPlug type Line voltage
Use a 5A fuse which is approved by ASTA 
or BSI to BSI362.
Always replace the fuse cover after 
changing the fuse.IMPORTANT PRECAUTIONSSave Original Packing MaterialsThe original shipping carton and packing...

Before Using
1011
EXEMPTION CLAUSES•Toshiba Corporation bears no responsibility in the case of damages arising from natural
disaster such as earthquakes, lightning, etc., fire not liable to Toshiba Corporation,
operation, theft or mischief by third parties, other accidents, or use under abnormal
conditions including erroneous or improper operation and other problems.
•Toshiba Corporation bears no responsibility for incidental damages (lost profit, work
interruption, corruption or loss of the memory...

Before Using
13
12
CONTENTSBefore UsingSAFETY PRECAUTIONS .................................................................................. 2
IMPORTANT SAFETY INSTRUCTIONS ........................................................... 4
POWER SUPPLY CORD SELECTION ............................................................. 9
IMPORTANT PRECAUTIONS ........................................................................... 9
EXEMPTION CLAUSES...

15
14
Preparations
(8) (6)(5)
(3) (4)
(1)
(12)
(9)(10)
(7)
(11)
(9)
(2)
Names of each part on the main unit
Name : Function
(1) Lens : Projects expanded image.
(2) Infrared remote sensor : Senses commands from the remote control. 
p.18
(3) Foot adjuster release button : Press to stow the foot adjuster. 
p.26
(4) Air exhaust : Expels air that has grown hot inside the projector.
(5) Control panel : Operates the projector. 
p.16
(6) Zooming lever : Adjusts screen size. 
p.26
(7) Air intake : Draws in air...

17
16
Preparations
Note
•Although this owner’s manual abbreviates component video signals as Y/P
B/PR, the
product also supports signals from video equipment marked “Y/C
B/CR.”
MONITORCOMPUTER 2 INY/PB/PR
(
)
AUDIO OUTAUDIO IN
CONTROL
S-VIDEOVIDEO
COMPUTER 1 INY/PB/PR
(
)
R
L
(7)
(15)
(13) (14) (12)(4) (5) (6)
(11)
(3)
(2)(1)
(10)
(8)
(9)
Name : Main Function
(1) Infrared remote sensor : Senses commands from the remote control. 
p.18
(2) S-VIDEO terminal : Input S video signals from video equipment.
(3)...

19 18
Preparations
■Operating the remote
controlPoint the remote control toward the
projector’s infrared remote sensor,
and press a button on the remote
control.•Operating the projector from the front
Approx. 15°
Approx. 5m
IN
P
U
TV
O
L
.+P
L
A
YSTOPPJ MODEL
A
S
E
RVOL.-M
E
N
U/E
N
T
E
RR
-
C
LI
C
K
•Operating the projector from the rear
Approx. 15°
Approx. 5m
IN
P
U
TV
O
L
.+P
L
A
YSTOPPJ MODEL
A
S
E
RVOL.-M
E
N
U/E
N
T
E
RR
-CL
IC
K
■Loading dry-cell batteries
into the remote controlqRemove the...