Toshiba Tdp S80 Projector User Manual

							41
Others
40
The indicator lights inform you of internal abnormalities.No power
⇒Problem with projector
• Unplug the power cord, and contact your dealer.
⇒ The lamp cover is not properly attached.
• Unplug the power cord, and reattach the lamp cover. 
p.39
Lamp went out during use, or won’t come on⇒ Lamp temperature is high so that it is difficult to turn on, the lifetime of
the lamp has ended or the projector is malfunctioning.
•
Unplug the power cord and wait for a short while, then turn the power back on.•If a lamp burns out, replace it with a new one.
❈ After approx. one minute of abnormal display, the projector returns to
the standby state waiting for internal cool down.
Power went out during use⇒ Internal overheating, or the outside temperature is too high.
• Place the projector so that the air intake and exhaust are not blocked.
•
Unplug the power cord and wait for a short while, then turn the power back on.❈ The 
 icon will appear before the power goes out.
❈ After approx. one minute of abnormal display, the projector returns to
the standby state waiting for internal cool down.
Power went out during use⇒ Problem with internal cooling fan.
• Unplug the power cord, and contact your dealer.
❈ The 
 icon will appear before the power goes out.
❈ After approx. one minute of abnormal display, the projector returns to
the standby state waiting for internal cool down.
Power went out during use⇒ Problem inside the projector.
•
Unplug the power cord and wait for a short while, then turn the power back on.• If the above action will not clear the problem, unplug  the power cord,
and contact your dealer.
❈ After approx. one minute of abnormal display, the projector returns to
the standby state waiting for internal cool down.
Power went out during use⇒ Camera is not correctly connected.
•
Disconnect the power plug and check the connection with the camera
.
❈ The 
 icon will appear before the power goes out.
❈ After approx. one minute of abnormal display, the projector returns to
the standby state waiting for internal cool down.
PRECAUTION
•Make sure to unplug the power cord if something goes wrong.
(Off)
Or (Orange lit)
Or (Orange lit)
(Red lit)
Tr ouble indicationsOthersTDP-S81(Red lit)
(Green lit)
(Red lit or flashing)
(Red lit)
(Red lit or flashing)(Red lit)
(Red lit)
(Green lit
or Off) (Green
flashing)
(Green lit
or Off)(Red lit) (Green lit)
Used LampsThis projector’s lamps contain trace amounts of environmentally harmful inorganic
mercury. Be careful not to break used lamps, and dispose of them in accordance with
local regulations.
Lens and main unit cleaning
 
W
ARNING
•Request cleaning and maintenance of a ceiling-mounted unit from your projector dealership
.
Attempting to clean/replace the lamp at a high site by yourself may cause you to drop
down, thus resulting in injury.
■ Lens cleaning•Clean the lens with a commercially available blower and/or
lens cleaner.
• The lens is easily scratched, so do not rub it with hard objects,
or strike it.■ Main unit cleaning•Clean the main unit after unplugging the power cord.
• Wipe dirt off the main unit gently with a soft cloth.
• If the soiling is severe, dip the cloth in a neutral
detergent diluted in water, wring well, and gently wipe
off the dirt, then finish up by wiping with a dry cloth.● Replacing cooling fans
To maintain the performance, it is recommended that cooling fans should be replaced
about every 2 to 3 years. Consult with your dealer for details.
Lamp replacement (Continued) 
						

							43
Others
42
If  This Happens CheckTDP-S81
The images from the
document camera
are blurryTDP-S81
The images from the
document camera
are flickering
If you think something is wrong, check the followings before contacting customer service.
Please see “Trouble indications ” 
p.41
 as well.
If  This Happens Check
No powerPower goes out
during useNo pictureNo audioPicture not
displayed
correctlyPicture blurred
Part of picture
out of focusImage is darkColors too light
Bad shadingRemote control
doesn’t workBefore calling service personnel
• Is the power cord plugged in? Is it connected to the projector?
• Is the lamp cover loose? 
p.39
•Is the ambient temperature high? 
p.41
•Is the air intake or air exhaust blocked? 
p.41
•Is the projector turned on? 
p.24
•Is the mute function on? 
p.28
•Is the brightness setting minimized? 
p.30
•Are the connections set up correctly? 
p.21
•Are all the connected devices functioning properly?
• Is the projector turned on? 
p.24
•Is the mute function on? 
p.28
•Is the volume setting minimized? 
p.25
•Are the connections set up correctly? 
p.21
•Are all the connected devices functioning properly?
• Is the input signal supported by the projector? 
p.45
, p.46
•Is there something generating an abnormal video signal, for
instance the video tape?
• Is the lens dirty? 
p.40
•Is the lens focus adjusted optimally? 
p.25
•Is the projection distance within the projector’s supported range?p.20•Is the projector’s screen placement angle tilted too far?  
p.20
•Are the sharpness or sampling phase adjustments off? 
p.27
 p.30
•Are the brightness or contrast adjustments off? 
p.30
•Is the lamp nearing the end of its service life? 
p.33
•Are the color, tint, R-level, G-level, or B-level adjustments off? 
p.30
•Is the screen dirty?
• Is the lamp nearing the end of its service life? 
p.33
•Are the remote control’s batteries drained?
• Are the batteries inserted into the remote control correctly? 
p.19
•Is the remote control being used within the effective range? 
p.19
•Are there any obstructions between the remote control and
projector?
• Are there any fluorescent or other bright lights shining at the
projector’s infrared remote sensor?
•Is the document imaging camera’s lens dirty?
• Is the document imaging camera out of focus? 
p.36
•Is the location of the object being focused too dark?
• Is there impact from the room’s fluorescent lighting?
Tu rn off the fluorescent lights, or change the shutter speed settings.p.30 
						

							45
Others
44
Specifications■List of general specifications
Item Specification
Consumption Power 270 WWeight TDP-S80: 2.8 kg
TDP-S81: 3.7 kg
External Dimensions TDP-S80: 298 
× 101.4  × 275.4 mm (W  × H  × D)(including protruding parts)
TDP-S81: 383  × 101.4  × 275.4 mm (W  × H  × D)
Cabinet material* PC+ABS resin and ABS resinConditions for usage
 environment
Temp: 5 °C to 35 °C; relative humidity: 30% to 70%
Display pixels
1 chip DMD™
Picture elements
480,000 pixels (800H  × 600V)
Lens Zoom lens      F=2.6-2.81   f=22.34-26.8 mmLamp High-pressure mercury lampProjection screen size 24.6-246 inchesProjection distance 1.20-10.00mSpeaker 1 W (Monaural)
COMPUTER-1 terminal
Mini D sub 15 pin   RGB / Y/P
B/PR (dual use)
COMPUTER-2 terminal
Mini D sub 15 pin   RGB / Y/P
B/PR (dual use) / CAMERA (TDP-S81)
MONITOR terminal
Mini D sub 15 pin   RGB / Y/P
B/PR (dual use)
S-VIDEO terminal Mini DIN 4 pinAUDIO (L/R) terminal RCA Pin Jack  × 2, 1.5 V (rms), 22 k Ω or moreVIDEO terminal RCA Pin Jack, 1 V (p-p), 75  ΩAUDIO IN terminal ø3.5mm dia. stereo mini-jack, 1.5V (rms); 22 k Ω or moreAUDIO OUT terminal ø3.5mm dia. stereo mini-jack
CONTROL terminal Mini DIN 8 pin (RS-232C)
■ Document camera specifications (TDP-S81)
Item Specification
Lens F=2.8, f=2.8mmFocusing Switching in two stepsZooming None (adjusted through distance from subject)Image element 1/4.2 inches honeycomb CCDEffective pixels for pickup section
629,856 pixels (648H  × 486V  × 2)
* Each plastic part displays the materials it is made from, in order to facilitate recycling after this
product becomes no longer usable.
Note
• Design, specifications, etc. subject to change without notice for improv\
ements, etc.Connection terminal
■ List of supported signals (RGB signals)This projector supports the following RGB signals. Note, however, that depending on the
computer model, the screen may show flicker or streaking. Please adjust the projector if
this happens.
(Press the SET UP button, and adjust automatically or manually. 
p.26
, p.27
)
Resolution
720 x 400
640 x 480
800 x 600
832 x 624
1024 x 768
1152 x 864
1280 x 960
1280 x 1024
1400 x 1050
1600 x 1200 Mode
720x400_85 VGA_60
V GA_72
V GA_75
V GA_85
SVGA_56
SVGA_60
SVGA_72
SVGA_75
SVGA_85 MAC16
XGA_60
XGA_70
XGA_75
XGA_85 MAC19
SXGA1_75
QuadVGA_60
QuadVGA_85 SXGA3_60
SXGA3_75
SXGA3_85 SXGA+
UXGA_60
UXGA_65
UXGA_70
UXGA_75
UXGA_85 Refresh rate
(Hz)
85.039
59.940
72.809
75.000
85.008
56.250
60.317
72.188
75.000
85.061
74.550
60.004
70.069
75.029
84.997
74.700
75.000
60.000
85.002
60.020
75.025
85.024
60.012
60.000
65.000
70.000
75.000
85.000 H-frequency
(kHz)
37.927
31.469
37.861
37.500
43.269
35.156
37.879
48.077
46.875
53.674
49.725
48.363
56.476
60.023
68.667
60.134
67.500
60.000
85.938
63.981
79.976
91.146
63.973
75.000
81.250
87.500
93.750
106.250 Clock
(MHz)
35.500
25.175
31.500
31.500
36.000
36.000
40.000
50.000
49.500
56.250
57.283
65.000
75.000
78.750
94.500
79.857
108.000
108.000
148.500
108.000
135.000
157.500
118.094
162.000
175.500
189.000
202.500
229.500Note
• Signals which resolution exceeds the native resolution (800  × 600 pixels) will be
compressed. For this reason, some information may be lost, or image quality may be
affected. 
						

							47
Others
46
■List of supported signals (Y/P
B/P
R signals)
Signal format fh(kHz) fv(Hz)
480i(525i)@60Hz 15.73 59.94
480p(525p)@60Hz 31.47 59.94
576i(625i)@50Hz 15.63 50.00
576p(625p)@50Hz 31.25 50.00
720p(750p)@60Hz 45.00 60.00
720p(750p)@50Hz 37.50 50.00
1080i(1125i)@60Hz 33.75 60.00
1080i(1125i)@50Hz 28.13 50.00
1035i(1125i)@60Hz 33.75 60.00
1152i(1250i)@50Hz 31.25 50.00
■List of supported signals (Video, S-Video signals)
Video mode fh(kHz) fv(Hz) fsc(MHz)
NTSC 15.73 60 3.58PA L 15.63 50 4.43
SECAM 15.63 50 4.25 or 4.41 P AL-M 15.73 60 3.58
P AL-N 15.63 50 3.58
P AL-60 15.73 60 4.43
NTSC4.43 15.73 60 4.43
■ Pin assignment of COMPUTER-1/2 & MONITOR terminals
11
15 6
1
5
10
Input Signal
• RGB input
RGB signals: 0.7V (p-p) 75  ΩHorizontal sync signal
:TTL level (Pos/neg polarity)
Ve rtical sync signal: TTL level (Pos/neg polarity)
• Y/P
B/PR input
Y signal: 1.0V (p-p) 75  Ω
P
B/PR signals: 0.7V (p-p) 75  Ω
Pin Pin descriptionNo. During RGB input During Y/PB/PR input1Video signal (R) Color difference signal (P
R)
2Video signal (G) Luminance signal (Y)3Video signal (B) Color difference signal (P
B)
4GND ∗5GND ∗6GND (R) GND (P
R)
7GND (G) GND (Y)8GND (B) GND (P
B)
9N.C ∗10 GND ∗11 GND∗12 N.C∗13 Horizontal sync signal∗14 Vertical sync signal∗
15 N.C ∗
Specifications (Continued)
∗ Do not connect anything.
■ CONTROL terminal●Pin assignment
7
6
8
5 43
2 1
Signal Name
RXDCTS
DSR
GND RTSN.C
TXD
GND
Pin No.
1
2
3
4
5
6
7
8 Description
Receiving data
Consent to send
Data set ready
Signal ground
Request to send
No connection
Sending data
Signal ground
Mini DIN 8 pin connector
● Interface format
1 Communication method RS-232C, 9600bps, No Parity, Data Length: 8 bits;
Stop Bit Length:  1 bit
2 Communication format STX (02h)  Command (3Byte)  ETX (03h)
Only 1 command valid per communication.
3 Data format For input commands, only ASCII-compliant all-uppercase
alphanumeric characters supported.
4 Replies Acknowledge ACK (06h)  CR (0Dh)  Data ...  Normally ended
ACK (06h)  ESC (1Bh) ...  Aborted
No acknowledge NAK (15h)
If commands are to be sent consecutively, wait for the response from the projector
before sending the next command.
● Main Commands
Item Command
Computer (1) input select IN1Computer (2) input selectIN2Video input selectIN3S-video input selectIN4Camera input select (TDP-S81)
IN5
Item Command
Power on PONPower off POFIcon display on MO0Icon display offMO1Auto setting (RGB input) PATStatus display on DON
Status display off DOFNote
•Contact your dealer for control cable and other commands.■ Separately sold product
Replacement Lamp Model TLPLW5
Mini D sub 15 Pin connector