Toshiba Satellite Pro Te2300 Manual

 
 
 
TE2300 Ve r s io n  1Last Saved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as  
Getting Started
3-8TOSHIBA TE2300 
Benefits of hibernation 
The hibernation feature provides the following benefits: 
■ Saves data to the hard disk when the computer automatically shuts 
down because of a low battery. 
 
For the computer to shut down in hibernation mode, the hibernation 
feature must be enabled in two places in TOSHIBA Power Saver: the 
Hibernate window and the Battery...

 
 
 
TE2300 Ve r s io n  1Last Saved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as  
Getting Started
3-9TOSHIBA TE2300 
Data save in hibernation mode 
When you turn off the power in hibernation mode, the computer takes a 
moment to save current memory data to the hard disk. During this time, 
the Built-in HDD indicator will light. 
After you turn off the computer and memory is saved to the hard disk, 
turn off the power to any peripheral devices. 
 
Do not turn the...

 
 
 
TE2300 Ve r s io n  1Last Saved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as  
Getting Started
3-10TOSHIBA TE2300   Open Performance and Maintenance and open TOSHIBA Power 
Saver. 
  3.  Press the power button. This feature must be enabled. Refer to the 
System Power Mode item in Power Saver Utility described in the 
Control Panel. 
  Open Performance and Maintenance and open TOSHIBA Power 
Saver. 
 
When you turn the power back on, you can continue where you left...

 
 
 
TE2300 Ve r s io n  1Last Saved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as  
Getting Started
3-11TOSHIBA TE2300 
Restoring the complete system 
To restore the operating system and all preinstalled software, follow the 
steps below. 
 
When you reinstall the Windows operating system, the hard disk will be 
reformatted and all data will be lost. 
1.  Load the Product Recovery CD-ROM in the drive and turn off the 
computer’s power. 
2.  Hold down the F12 key and...

 
 
 
TE2300 Ve r s io n  1Last Saved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as  
Getting Started
iTOSHIBA TE2300 
4. Chapter 4 
Operating Basics
This chapter gives information on basic operations including using 
AccuPoint II, USB diskette drive, optical media drives, the internal 
modem, Wireless LAN, LAN and changing Slim Select Bay modules. It 
also provides tips on caring for your computer, diskettes and CD/DVDs. 
Using AccuPoint II 
To use the AccuPoint II,...

 
 
 
TE2300 Ve r s io n  1Last Saved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as  
Operating Basics
4-2TOSHIBA TE2300 ■ You touch the AccuPoint II during power-up. 
■ You apply constant, soft pressure during power-up. 
■ There is a sudden temperature change. 
■ Strong stress is applied to the AccuPoint II. 
If an error message appears, reboot the computer. If an error message 
does not appear, wait a moment for the pointer to stop, then continue 
operation. 
Replacing...

 
 
 
TE2300 Ve r s io n  1Last Saved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as  
Operating Basics
4-3TOSHIBA TE2300 
Using the USB diskette drive 
A 3 1/2 diskette drive connects to the computer’s USB port. It 
accommodates 1.44-megabyte or 720-kilobyte diskettes. Refer to 
Chapter 2, The Grand Tour, for more information. 
Connecting 3 1/2 diskette drive 
To connect the drive, plug the diskette drive connector into a USB port. 
Refer to figure below. 
 
Make sure the...

 
 
 
TE2300 Ve r s io n  1Last Saved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as  
Operating Basics
4-4TOSHIBA TE2300 
Changing Slim Select Bay modules 
This section explains how to change modules in the Slim Select Bay. 
The illustrations show replacement of the DVD-ROM drive with the Slim 
Select Bay HDD adaptor. Therefore, the text refers to those modules. 
However, the procedures are the same for any of the other modules: 
CD-RW/DVD-ROM drive, DVD Multi drive, Slim...

 
 
 
TE2300 Ve r s io n  1Last Saved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as  
Operating Basics
4-5TOSHIBA TE2300 
 
Removing the DVD-ROM drive 
Installing a module 
Install the Slim Select Bay HDD adaptor as described below. 
  1.  Insert the Slim Select Bay HDD adaptor in the computer as shown 
below and press until the ejector clicks. 
  2.  If you want to lock the Slim Select Bay module, set the screw of the 
Slim Select Bay lock in the back hole. 
 
Installing...

 
 
 
TE2300 Ve r s io n  1Last Saved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as  
Operating Basics
4-6TOSHIBA TE2300 
Using optical media drives 
The text and illustrations in this section refer primarily to the DVD-ROM 
drive. However, operation is the same for the CD-RW/DVD-ROM and 
DVD Multi drives. The full-size drive provides high-performance execution 
of CD/DVD-ROM-based programs. You can run either 12 cm (4.72) or 
8 cm (3.15) CD/DVDs without an adaptor. An...