Toshiba Satellite L300 L305 Maintenance Manual

3  Diagnostic Programs 3.1 General 
2   Satellite L300D,Satellite Pro  L300, EQUIUM L300,SATEGO L300 Mai ntenance Manual  
… A Test Media CD (A-BEX TEST CD-R OM TCDR-702)(for CD-ROM test) 
… A Test Media DVD (Toshiba-EMI  DVD-ROM TEST DISK TSD-1) 
… An External Monitor (for DISPLAY test) 
… A CD-ROM Driver (for CD-ROM test) 
… Audio Line for audio record test 
… A Data CD (for CD-ROM test) 
The following chapters describe all the test deta ils. The test items could be selected from the 
DIAGNOSTIC TEST...

3.2 Quick Start  3  Diagnostic Programs 
3.2 Quick Start 
When the system is booting from Service Diagnos tic CD, the following screen will be displayed: 
  
Please select a test item or select  0 to exit to Free-DOS: 
3.2.1 Quick Test 
When this item is selected, the system will run the configured test items and generate a test 
report automatically. 
When the test is completed, a file named Qu ick.log would be saved in the defined location. 
When Quick.log is being created, meanwhile, a file named...

3  Diagnostic Programs 3.2 Quick Start 
          
 
 
Select ‘Test Mouse’ or press  F8 to run the test. The prompt information would be 
displayed in the screen as below. This test  item needs user to verify whether the mouse 
works normally. 
   
The test result will be displayed in the following screen:  
4    Satellite L300D,Satellite Pro  L300, EQUIUM L300,SATEGO L300 Mai ntenance Manual   

3.2 Quick Start  3  Diagnostic Programs 
   
Here is another method to run the test: Highl ight a test item by using arrow keys, then, 
press Enter  to start. If there are parameters pr ovided, user should set parameters in the 
parameter dialog window. 
 
CPU Speed Test (Step by Step): 
1.  Select test item:  
Select System —CPU—CPU Speed,  then, press the  Enter key. 
 
2. Parameters Setting 
Choose the  OK button after you set the proper parameters in the following window. 
Satellite L300D,Satellite...

3  Diagnostic Programs 3.2 Quick Start 
 
3. Test Result 
System will automatically run and display the test result as follows: 
 
Following is the comparison report of the  two testing methods mentioned above:  
1) Configuration and Running 
As to the method used in Mouse test, the user  is required to select test items by pressing 
Space key and set the parameters artificially, (See 
3.3.3 Item’s Parameters 
Configuration) Then press  F8 to start the test. User should configure each parameter in...

3.2 Quick Start  3  Diagnostic Programs 
As to the method adopted in CPU Speed test , user should highlight the test item and 
press Enter  to start testing. And the user has to  setup the parameters every time before 
running the test. Using this method, only one test item would be tested at one time. 
 
3.2.3 Keyboard  Layout test 
    The test purpose is to check whether  30 kinds of keyboards run well during the test 
procedure. When users choose the item, the na mes of these countries will be...

3  Diagnostic Programs 3.2 Quick Start 
   
It requires user to press the key and check whether the key in the screen changes 
color or not. User can terminate test by typing ‘ END’. When testing the ‘ Fn’ key, it 
must press the  ‘ Esc’ key at the same time.  
When the user has checked all the keys and  all the keys in the screen have changed 
color, the diagnostics program would automa tically end the test and report the pass 
information.  
If keyboard test fails, program will terminat e the test and...

3.2 Quick Start  3  Diagnostic Programs 
    
User can press any key to exit the program. 
3.2.7 DMI Write 
In addition to reading the DMI information, DMI Write  also permits attributes editing 
and updating: Manufacture, Product Name, Ve rsion, Serial Number, and OEM Part 
Number, etc. The following screen will be displayed: 
    
In this screen, All lines which attr ibute could be edited and updated. The 1st line (the font 
in yellow with blue background) shows the attr ibute’s value that is read...

3  Diagnostic Programs 3.2 Quick Start 
During the editing, user could press  F2 to confirm the DMI attribute update or press  F4 
to ignore the modification. Press  ESC to exit the program of DMI Write. 
The confirmation screen is as below: 
    
NOTE:  Setup All of DMI Informati on in Type  is Max 32 Digital  
The attributes that have been modified woul d be marked in red; otherwise in yellow. 
User could press  F2 to save the changes, or press  F4 to ignore and exit the current 
program. 
3.2.8...

3.2 Quick Start  3  Diagnostic Programs 
 
On the left column of the above screen, the detected hardware components are listed. The 
corresponding information of th e detected hardware components is displayed on the right 
of the screen. It displays  the current running status information of the check program. 
The name of the program is marked on the t op of the screen. At the bottom, the function 
keys are listed for user operation. During th e detection, keyboard operation is invalid.  
When the...