Toshiba Satellite C55-a Owners Manual

							The TOSHIBA VIDEO PLAYER is intended for playing DVD-Video,
DVD-VR and video files and for viewing 2D home video content in 3D. The 3D playback of any video content not created by the user may
require the permission of third parties, where such content is protected by copyright. The protection of intellectual property rights is essentialfor TOSHIBA. In this respect, TOSHIBA underlines that the Player
should not be used in a manner infringing such rights. It is your responsibility to ensure that you do not infringe any applicable
intellectual property laws when you decide to use the Player and,
more specifically, the 2Dto3D conversion function of the TOSHIBA VIDEO PLAYER.
Some functions are not functionable during 3D playback. In such
cases, any corresponding buttons will be disabled.
You may experience some time lag if you perform any of the following
operations when the “Video Display Window” is at full-screen size.
Bring up windows such as [Right-Click Menu], [Settings Window],
[Title/Chapter Search], [File Select] or [Error Message].
Operate on Windows
Operate on other applications
Please make sure AC adapter is used when playing with the enabled 3D playback feature.
3D playback occurs only in full-screen size. When you enable 3D
playback, the “Video Display Window” automatically enlarges to fullscreen size.
In order for 3D playback to work on external display/TV, you need a
3D enabled display/TV that has an HDCP compliant HDMI port.
3D video content can only be displayed on external display using
HDMI "with 3D".
The 3D effect differs among individuals.
Viewing 3D playback may cause discomfort. In this case, please stop
viewing and consult your doctor.
Please consider if it is suitable or a need for time limit before allowing
your child to watch a 3D content.
Depending on the lighting condition of your room, you may experience some flickerings when you have the 3D glasses on.
Upconvert and 3D Playback functions cannot be used at the same
time. Switching to 3D playback while upconvert is running will cause
the upconvert function to switch off automatically.
Depending on the video content, it might not be able to playback in 3D.
Only Side-by-Side and Interleave 3D video formats are supported forplayback of 3D video content.
User's Manual 4-17 
						

							Notes on 3D Playback for TOSHIBA Blu-ray Disc PlayerThe 3D playback function can playback 3D video content, and your 2Dhome video content and other 2D content created by you (DVD or video
file) in 3D using real-time 2Dto3D conversion.
The 3D playback function CANNOT be used to playback 2D video
contents of Blu-ray Disc or AVCHD in 3D using real-time 2Dto3D conversion.
The Player's 3D playback function is meant for only personal home
use. Please take note that applicable copyright laws may prohibit the
public display when you offer 3D viewing of third party video contents
to unidentified personels or mass public.
The 2Dto3D conversion function uses TOSHIBA's original algorithm to
apply a 3D effect to your own 2D videos. However, note that this function does not provide the same video content as a video originally
provided in 3D, and does not create a new video in the 3D format but only plays 2D videos in a 3D like mode.
The picture generated by 2Dto3D conversion function is not the same
as a picture produced for 3D playback use. The 2Dto3D conversion
function simply uses TOSHIBA's original algorithm to apply pseudo 3D effect to the 2D content.
The Player is set by default in the 2D format. By pressing the 2Dto3D
conversion function button, you decide to activate the 2Dto3D
conversion function and therefore decide to watch your 2D content in 3D. The Player will not run the 2Dto3D conversion function
automatically. Please see the warnings in this section as regards potential copyright infringement and confirm you have any necessary
authorization.
The Player is intended for playing DVD-Video, DVD-VR and video files
and for viewing 2D home video content and other 2D content created by you in 3D. The 3D playback of any video content not created by theuser may require the direct or indirect permission of third parties,
where such content is protected by copyright, unless otherwise
permitted under applicable law. The protection of intellectual property rights is essential for TOSHIBA. In this respect, TOSHIBA underlines
that the Player should not be used in a manner infringing such rights. It is your responsibility to ensure that you do not infringe any
applicable intellectual property laws when you decide to use the
Player and, more specifically, when you decide to activate the 2Dto3D conversion function of the Player.
Some functions cannot be used during 3D playback. In such cases,
any buttons used for those functions may be disabled.
User's Manual 4-18 
						

							Depending on the system environment, the player may automaticallyswitch into 2D if you perform any of the following operations during 3Dplayback. Furthermore, you may experience some time lag when theswitching occurs.
- Opening windows or pop-ups such as [Right-Click Menu], [Settings
Window], [File Select] or [Error Message].
- Using Windows features.
- Using any other applications.
Please make sure to use AC adapter when playing with 3D playback
feature enabled.
Depending on the system environment, 3D playback may only be used when the "Video Display Window" is at full-screen. 3D playbackmay not function when windowed.
In order for the 3D playback to work on an external display/TV, you
need a 3D enabled display/TV that has an HDCP compliant HDMI
port.
3D video content can only be displayed on an external display connected using HDMI "with 3D".
3D Settings can be changed on the "Settings" Screen, but the defaultsettings are highly recommended. Changing the settings may causethe 3D stereoscopic effect to become stronger, which in turn may
cause eye fatigue.
The 3D effect differs between individuals. Please refrain from or stop viewing and check your equipment settings, if you can see doubly-
substituted video images or cannot feel the 3D stereoscopic effect when watching 3D video images. Still, if you cannot see correctly,
please refrain from or stop viewing.
Please refrain from or stop viewing if you feel ill or experience discomfort before or while watching 3D video images.
Please position yourself directly in front of the display when watching3D video images. And please take regular breaks in between.
Due to the possibility of impact on vision development, viewers of 3Dvideo images should be aged 6 or older.
Please consider whether it is suitable or is there a need for limiting the
viewing time before allowing your child to watch a 3D content.
This software does not have parental lock for 3D video viewing.
Please use the login-password functions of Windows if you are worried about the effect of 3D playback on your child's visual function.
This software can playback MPEG2, MP4, and WTV files. Your own
2D video contents recorded using home video camcorder and other
content created by you can be played in either 2D, or 3D using real- time 2Dto3D conversion. As for playback of 3D video content, onlySide-by-Side and Interleave 3D video formats are supported.
Not all files can be played.
User's Manual 4-19 
						

							BatteryThis section explains battery types, use, recharging methods and handling.
Battery types The computer has different types of batteries.
Battery pack
When the AC adaptor is not connected, the computer's main power source
is a removable lithium ion battery pack, also referred to in this manual as
the main battery. You can purchase additional battery packs for extended
use of the computer away from an AC power source although you should
not change the battery pack while the AC adaptor is connected.
Before you remove the battery pack, save your data and shut down thecomputer, or place the computer into Hibernation Mode. Please be awarethat, when placing the computer into Hibernation Mode, the contents ofmemory will be saved to the hard disk drive, although for safety sake, it isbest to also save your data manually.
Real Time Clock (RTC) battery
The Real Time Clock (RTC) battery provides power for the internal real
time clock and calendar function and also maintains the system configuration while the computer is turned off. If the RTC battery becomes
completely discharged, the system will lose this information and the real
time clock and calendar will stop working.
You can change the Real Time Clock settings in the BIOS setup utility.
Please refer to  Troubleshooting  for further information.
Care and use of the battery pack This section provides the important safety precautions in order to handleyour battery pack properly.
Refer to the enclosed  Instruction Manual for Safety and Comfort  for
detailed precautions and handling instructions.
Make sure the battery is securely installed in the computer before
attempting to charge the battery pack. Improper installation could
generate smoke or fire, or cause the battery pack to rupture.
Keep the battery pack out of reach of infants and children. It can
cause injury.
User's Manual 4-20 
						

							The lithium ion battery pack can explode if not replaced, used,handled or disposed of properly. Dispose of the battery as required by
local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements.
The computer's RTC battery is a lithium ion battery and should be
replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled ordisposed. Dispose of the battery as required by local ordinances or
regulations.
Charge the battery pack only in an ambient temperature between 5
and 35 degrees Celsius. Otherwise, the electrolyte solution might leak,
battery pack performance might deteriorate and the battery life might
be shortened.
Never install or remove the battery pack without first turning off the power and disconnecting the AC adaptor. Never remove the battery pack while the computer is in Sleep Mode. Data could be lost.
Never remove the battery pack while the Wake-up on LAN function is
enabled. Data will be lost. Before you remove a battery pack, disable the Wake-up on LAN function.
Charging the batteries
When the power in the battery pack becomes low, the  DC IN/Battery
indicator will flash amber to indicate that only a few minutes of battery
power remain. If you continue to use the computer while the  DC IN/Battery
indicator flashes, the computer will enable Hibernation Mode so that you do
not lose any data, and automatically turn itself off.
You must recharge a battery pack when it becomes discharged.
Procedures
To recharge a battery pack, connect the AC adaptor to the DC IN 19V jack
and plug the other end into a working outlet - the  DC IN/Battery indicator
will glow amber while the battery is being charged.
Use only the computer connected to an AC power source or optional
TOSHIBA Battery charger to charge the battery pack. Never attempt to
charge the battery pack with any other charger.
Charging Time
The following table shows the approximate time required to fully charge a
discharged battery.
User's Manual 4-21 
						

							Battery typePower offPower onBattery pack
(24Wh, 3 cell)3 hours max3~5 hoursBattery pack
(48Wh, 6 cell)3 hours max3~5 hoursBattery pack
(67Wh, 6 cell high
capacity)4 hours max4~5 hoursPlease be aware that the charging time when the computer is on is affected
by ambient temperature, the temperature of the computer and how you are using the computer - if you make heavy use of external devices forexample, the battery might scarcely charge at all during operation.
Battery charging notice
The battery may not begin charging immediately under the followingconditions:
The battery is extremely hot or cold (if the battery is extremely hot, it
might not charge at all). To ensure the battery charges to its full
capacity, you should charge it at room temperature of between 5°C to
35°C (41°F to 95°F).
The battery is nearly completely discharged. In this instance you should leave the AC adaptor connected for a few minutes and the battery should begin charging.
The  DC IN/Battery  indicator may show a rapid decrease in battery
operating time when you try to charge a battery under the following
conditions:
The battery has not been used for a long time.
The battery has completely discharged and been left in the computer
for a long time.
In such cases you should follow the steps as detailed below:
1. Fully discharge the battery by leaving it in the computer with the power on until the system automatically turns itself off.
2. Connect the AC adaptor to the DC IN 19V jack of the computer, and to a wall outlet that is supplying power.
3. Charge the battery until the  DC IN/Battery indicator glows white.
Repeat these steps two or three times until the battery recovers normal capacity.
Monitoring battery capacity Remaining battery power can be monitored using the following methods.
User's Manual 4-22 
						

							Clicking the battery icon on the Taskbar
Via the Battery Status in the Windows Mobility Center windowYou should wait at least 16 seconds after turning on the computerbefore trying to monitor the remaining operating time. This is because
the computer needs this time to check the battery's remaining capacity and then calculate the remaining operating time, based on this
together with the current power consumption.
Please be aware that the actual remaining operating time may differ slightly from the calculated time.
With repeated discharges and recharges, the battery's capacity will
gradually decrease. In view of this it will be noted that an often used,
older battery will not operate for as long as a new battery even when
both are fully charged.
Maximizing battery operating time
A battery's usefulness depends on how long it can supply power on asingle charge, while how long the charge lasts in a battery depends on:
Processor speed
Screen brightness
System Sleep Mode
System Hibernation Mode
Display power off period
Hard Disk Drive power off period
How often and for how long you use the Hard Disk Drive and external
disk drives, for example, optical disc.
How much charge the battery contained to begin with.
How you use optional devices, such as a USB device, to which the battery supplies power.
Whether you enable Sleep Mode, which can conserve battery power ifyou are frequently turning the computer off and on.
Where you store your programs and data.
Whether you close the display panel when you are not using thekeyboard - closing the display saves power.
The environmental temperature - operating time decreases at low
temperatures.
The condition of the battery terminals - you should always ensure the terminals stay clean by wiping them with a clean dry cloth beforeinstalling the battery pack.
Batteries exhausted time When you turn off the power of your computer with batteries fully charged,
the batteries will be exhausted within the following approximate period.
User's Manual 4-23 
						

							Battery typeSleep ModeShut Down ModeBattery pack
(24Wh, 3 cell)about 1.5 daysabout 22 daysBattery pack
(48Wh, 6 cell)about 3 daysabout 43 daysBattery pack
(67Wh, 6 cell high
capacity)about 4 daysabout 63 days
Extending battery life
To maximize the life of your battery packs:
At least once a month, disconnect the computer from a power source and operate it on battery power until the battery pack fully discharges. Beforedoing so, follow the steps as detailed below.
1. Turn off the computer's power.2. Disconnect the AC adaptor and turn on the computer's power - if it
does not turn on then go to Step 4.3. Operate the computer on battery power for five minutes. If you find
that the battery pack has at least five minutes of operating time, continue operating until the battery pack is fully discharged, however, if
the  DC IN/Battery  indicator flashes or there is some other warning to
indicate a low battery condition, go to Step 4.4. Connect the AC adaptor to the DC IN 19V jack of the computer, and to a wall outlet that is supplying power. The  DC IN/Battery indicator
should glow amber to indicate that the battery pack is being charged, however, in the event that  DC IN/Battery indicator does not glow this
indicates that power is not being supplied - check the connections for the AC adaptor and the power cord.5. Charge the battery pack until the  DC IN/Battery indicator glows
white.
Replacing the battery pack
Please be aware that the battery pack is classified as a consumable item.The operating life of the battery pack will gradually reduce throughrepeated charging and discharging, and will need to be replaced when it
reaches the end of its operating life. In addition to this, you might also
replace a discharged battery pack with a charged spare when you are
operating your computer away from an AC power source for an extended
period of time.
User's Manual 4-24 
						

							This section explains how to remove and install the battery pack, andbegins with the removal process which is detailed through the following steps.Do not remove the battery pack while the computer is in Sleep Mode.
Data is stored in RAM, so if the computer loses power it could be lost.
In Hibernation Mode, data will be lost if you remove the battery pack or
disconnect the AC adaptor before the save is completed.
Do not touch the battery release latch while holding the computer or the battery pack might fall out due to the unintentional release of the battery release latch and cause injuries.
Removing the battery pack
To remove a discharged battery, follow the steps as detailed below:
1. Save your work.
2. Click  Power in the  Settings  charm, and then click  Shut down while
holding down the  SHIFT key - ensure that the  Power indicator is off.
3. Remove all cables and peripherals that are connected to the computer.
4. Close the display panel and turn the computer upside down.
5. Slide the battery lock into its unlock (
) position.
6. Slide and hold the battery release latch to disengage the battery pack and then lift it up to remove it from the computer.
Figure 4-5 Releasing the battery pack -1
Figure 4-6 Releasing the battery pack -2
1. Battery lock3. Battery pack2. Battery release latch
User's Manual 4-25 123
3
12   
						

							Installing the battery pack
To install a battery pack, follow the steps as detailed below:
Do not touch the battery release latch while holding the computer or thebattery pack might fall out due to the unintentional release of the batteryrelease latch and cause injuries.
1. Insert the battery pack as far as it will go into the computer.
2. Ensure that the battery pack is securely in place and the battery lock is in its locked position.
3. Turn your computer over.
LAN The computer may have built-in support for Ethernet LAN (10 megabits per
second, 10BASE-T), Fast Ethernet LAN (100 megabits per second, 100BASE-TX) or Gigabit Ethernet LAN (1000 megabits per second,
1000BASE-T).
This section describes how to connect/disconnect to a LAN.
Do not install or remove a memory module while Wake-up on LAN is enabled.The Wake-up on LAN function consumes power even when the
system is off. Leave the AC adaptor connected while using this feature.
The Link speed (10/100/1000 megabits per second) changes
automatically depending on the network conditions (connected device, cable or noise and so on).
LAN cable types
The computer must be configured properly before connecting to a LAN.Logging onto a LAN using the computer’s default settings could cause amalfunction in LAN operation. Check with your LAN administrator regarding
set-up procedures.
If you are using Gigabit Ethernet LAN (1000 megabits per second,
1000BASE-T), be sure to connect with a CAT5e cable or higher. You cannot use a CAT3 or CAT5 cable.
If you are using Fast Ethernet LAN (100 megabits per second, 100BASE-
TX), be sure to connect with a CAT5 cable or higher. You cannot use a
CAT3 cable.
If you are using Ethernet LAN (10 megabits per second, 10BASE-T), you can connect with a CAT3 or higher cable.
User's Manual 4-26