Toshiba Satellite 6000fru Maintenance Manual

FIELD REPLACEABLE UNIT DOCUMENTATIONGENERAL INFORMATIONBefore attempting any of the following procedures,
make sure that the main battery and AC adaptor is 
 not connected to the unit and the environment in
which you are working on is protected from
Electro-Static Discharge(ESD).FIELD REPLACEABLE UNIT DOCUMENTATIONGENERAL INFORMATIONBefore attempting any of the following procedures,
make sure that the main battery and AC adaptor is 
 not connected to the unit and the environment in
which you are working...

FIELD REPLACEABLE UNIT DOCUMENTATION6000 Series
TOSHIBA
Tough Enough for Today’s World.         TABLE OF CONTENTS:
1. BATTERY PACK REMOVAL
2. OPTIONAL PC CARD REMOVAL
3. SELECT BAY REMOVAL
4. CD-R/W/DVD-ROM DRIVE DISASSEMBLY 
5. MEMORY MODULE REMOVAL
6. BLUETOOTH CARD REMOVAL
7. MODEM BOARD REMOVAL
8. HDD REMOVAL
9. KEYBOARD REMOVAL
10 WIRELESS LAN CARD REMOVAL
11. TOP COVER REMOVAL
12. COOLING MODULE REMOVAL
13. CPU REMOVAL
14. RTC BATTERY REMOVAL
15. POWER SUPPLY BOARD REMOVAL
16. SD/SOUND BOARD...

TOSHIBA
Tough Enough for Today’s World.OPTIONAL PC CARD REMOVAL1. Press the eject button of the PCCard you want to
    remove.2. Press the extended eject button to pop the PC card
    out.
3. Grasp the PC card and remove it.SELECT BAY REMOVAL1. Turn the computer upside down.
2. Slide the release lever in the direction of the arrow.
3. Pull out the select bay device in the direction of the
    arrow.
FIELD REPLACEABLE UNIT DOCUMENTATION6000 SeriesBATTERY PACK  REMOVAL1. Turn the computer upside down as...

TOSHIBA
Tough Enough for Today’s World.
FIELD REPLACEABLE UNIT DOCUMENTATION6000 SeriesMemory
slot coverM2.5x4
black screwsMEMORY MODULE REMOVAL1. Turn the computer upside down. 
2. Remove two M2.5x4 black screws securing the 
    memory cover.3. Lift out the memory slot cover.4. Spread the memory clips outward and pull the 
    memory module out of the connector on a
    45 degree angle.BLUETOOTH CARD REMOVAL1. Remove one M2x4 security torx screw securing 
    the bluetooth cover.2. Lift out the...

TOSHIBA
Tough Enough for Today’s World.
FIELD REPLACEABLE UNIT DOCUMENTATION6000 SeriesMODEM BOARD REMOVAL1. Remove one M2.5x4 black screw securing the modem
    slot cover.2. Insert your finger nail or the case separator into the    notched side of the cover and lift up to release the two    latches securing the left side of the modem slot cover.3. Disconnect the modem harness from the modem
    board.4. Remove two M2x4 brass screws securing the 
    modem board.5. Lift up the modem board to disconnect...

FIELD REPLACEABLE UNIT DOCUMENTATION6000 Series
TOSHIBA
Tough Enough for Today’s World.5. Remove two M3x4 brass flat head screws securing
    the HDD to the bracket and remove the HDDbracket.M3x4 brass flat head screwsHDD bracketHDD  HDD  REMOVALKEYBOARD REMOVAL1. Turn the computer right side up and open the display
    panel.2. Using the case separator, unlatch the keyboard 
    holder  at the top of the keyboard.LatchKeyboard holderKeyboard 3. Remove two M2.5x2.6 black screws securing the
    keyboard....

WIRELESS LAN CARD REMOVAL1. Remove one M2x4 security torx screw securing 
    the mini PCI cover and lift out the cover.2. Disconnect the black and white coax from the
    wireless LAN card.3. Spread the Mini-PCI connector clips and pull the 
    Wireless LAN card out of the connector about 
   45 degree angle.TOSHIBA
Tough Enough for Today’s World.
FIELD REPLACEABLE UNIT DOCUMENTATION6000 SeriesTOP COVER REMOVAL1. Turn the computer upside down and remove the 
    following screws:    -12 M2.5x8  black...

TOSHIBA
Tough Enough for Today’s World.
FIELD REPLACEABLE UNIT DOCUMENTATION6000 Series  Satellite ProTM 
3. Disconnect the left speaker cable from PJ310 and the 
    right speaker cable from PJ311 on the top board. 
4. Disconnect the LCD/FL harness from PJ34 and the IPS 
    membrane switch from PJ311 on the system board.
5. Lift out the top cover assembly.  
    Note: When installing the top cover, ensure that the bluetooth
          coaxial cable is properly routed to the Bluetooth slot.TOP COVER...

TOSHIBA
Tough Enough for Today’s World.
FIELD REPLACEABLE UNIT DOCUMENTATION6000 Series1. Remove one M2.5x6 black flat head screw  securing the
    HDD guide assembly and lift out the HDD guide assembly.
2. Remove three M2.5x6 black flat head screws securing
    the select bay cover and lift out the select bay cover.SYSTEM BOARD REMOVAL3. Disconnect following cables from the system board:
    -Sound interface cable from PJ103
    -SD interface cable from PJ150    -DC-IN jack harness from PJ8034. Remove...

MEMBRANE SWITCH REMOVAL1. Remove three M2.5x4 black flat head screws
    securing the membrane switch.
2. Lift out the membrane switch assembly.FIELD REPLACEABLE UNIT DOCUMENTATION6000 Series
TOSHIBA
Tough Enough for Today’s World.1. Remove two M2.5x4 black flat head screws 
    securing the left and right speakers.  SPEAKERS REMOVALSPEAKERS REMOVAL  Satellite ProTMM2.5x4 black flat head screwsMembrane
switch assyLeft and right
speakersM2.5x4 black flat head screws2. Turn the display assembly right side...