Toshiba Satellite 3000 Maintenance Manual

Tough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION3000 Series  SatelliteGENERAL INFORMATIONTMBefore attempting any of the following procedures,
make sure that the main battery and AC adaptor is 
not connected to the unit and the environment in 
which you are working on is protected from
Electro-Static Discharge(ESD).
TOSHIBA
Tough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION3000 Series  SatelliteGENERAL INFORMATIONTMBefore attempting any of the following procedures,
make...

FIELD REPLACEABLE UNIT DOCUMENTATION  SatelliteTM3000 Series
TOSHIBA
Tough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION  SatelliteTM3000 Series
TOSHIBA
Tough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION  SatelliteTM3000 Series
TOSHIBA
Tough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION  SatelliteTM3000 Series
TOSHIBA
Tough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION  SatelliteTM3000 Series
TOSHIBA
Tough Enough for Today’s World
FIELD...

BATTERY PACK  REMOVALOPTIONAL PC CARD REMOVALTOSHIBA
Tough Enough for Today’s World1.  Turn the computer upside down as shown.
2.  Slide the battery release lever in the direction of  the
     arrow.  3.  Slide the battery pack forward and lift it out.1. Push the eject button to pop it out.
2. Press the eject button and remove the PC card.NOTE: Before removing any PCMCIA device, make 
            sure it is “STOPPED” in the PC Card Manager.
FIELD REPLACEABLE UNIT DOCUMENTATION  SatelliteTM3000...

MEMORY MODULE REMOVAL1. Turn the computer upside down. 
2. Remove two M2x3 black screws and remove the
    memory cover.FIELD REPLACEABLE UNIT DOCUMENTATION  SatelliteTM
TOSHIBA
Tough Enough for Today’s World3000 SeriesHDD REMOVAL5. Remove two M3x4 silver screws securing  the
    HDD bracket to the drive and lift off the bracket.
6. Peel off the HDD insulator.HDD REMOVAL  1. Turn the computer upside down.
  2. Remove two M2.5x3 black screws securing 
      HDD assembly.
  3. Slide the HDD assembly in the...

CONTROL BOARD REMOVAL1. Remove four M2.5x3 black screws securing the
    control switch board.2. Disconnect the control switch/LED board from JP4
    on the main PCB. KEYBOARD REMOVAL4. Lift out the keyboard and set it as shown above.
5  Disconnect the keyboard cable from JP5 and IPS switch
    cable from JP4 on the video board and lift out the
    keyboard.FIELD REPLACEABLE UNIT DOCUMENTATION  SatelliteTM
TOSHIBA
Tough Enough for Today’s World3000 SeriesKEYBOARD REMOVAL1. Open the display panel.
2....

FIELD REPLACEABLE UNIT DOCUMENTATION  SatelliteTM
TOSHIBA
Tough Enough for Today’s World3000 Series1. Remove four M2.5x3 brass screws securing the
    heatsink cover.COOLING MODULE REMOVALM2.5x3 black
screwsHeatsink
cover2. Remove four silver screws securing the heatsink.
3. Lift out the heatsink.HeatsinkSilver screwsCPU REMOVALCPU
lockFlat head screwdriverOpenLock1. Using a 5mm flat head screw driver, insert the screwdriver
    into the CPU lock slot and turn it counterclockwise.2. Lift out the...

2. Turn the computer right side up and open the display panel.
3. Disconnect the following four cables:    - Black and Gray coax cables
    - IPS switch cable from PJ1
4. Remove one M2.5x15 silver flat head screws securing 
    the LCD/FL cable and disconnect the LCD/FL cable.   TOP COVER REMOVALFIELD REPLACEABLE UNIT DOCUMENTATION  SatelliteTM3000 Series
TOSHIBA
Tough Enough for Today’s WorldLCD/FL cableM2.5x15 silver
flat headscrewIPS switch cableGrey coax
cableBlack coax cable5. Remove six M2.5x6...

  WIRELESS LAN CARD REMOVALFIELD REPLACEABLE UNIT DOCUMENTATION  SatelliteTM
TOSHIBA
Tough Enough for Today’s World3000 SeriesMODEM BOARD REMOVAL1. Disconnect the modem board from JP13 on the 
    system board.2. Disconnect the RJ11 cable from the modem board.Modem boardRJ11 cableJP13Wireless LAN cardMini PCI
Clips1. Push the Mini PCI slot clips outward and pull the
    Wireless LAN card out of the connector on a
   30 degree angle.VIDEO BOARD REMOVAL1. Disconnect the video board from JP8 and JP11 on...

FIELD REPLACEABLE UNIT DOCUMENTATION  SatelliteTM3000 Series
TOSHIBA
Tough Enough for Today’s World2. Remove four hex screws at the back of the computer
    securing the system board.3. Lift out the system board.System boardHex screws1. Remove the following eleven screws securing the 
    system board:  - 2 M2.5x4 brass screws securing the metal shield
  - 5 M2.5x4 brass screws securing the HDD shield  - 1 M2.5x4 brass screw on the system board  - 4 stud screws from the CPU socket
 
 SYSTEM BOARD...

14” DISPLAY MASK REMOVAL
1. Remove two rubber seals  at the top corners of the
    display assembly and  two mask seals at the bottom 
    corners of the display assembly. 
2. Remove  four M2.5x5 silver screws  securing the display
     mask.
3. There are  21 latches securing the  display mask .
    Carefully insert your fingers between the  display mask
     and the  LCD module  and pry open the latches starting 
    from the  bottom six latches , to the five latches on the
    right and  left sides ,...