Toshiba Satellite 1405 S Manual

101
Learning the Basics
Using Turn Off or Shut down
5.375 x 8.375 ver 2.4.0
Sample Turn off computer window 
2Click Tu r n  O f f. 
The computer turns itself off.
If you are using the Windows
® XP Pro operating system and 
are a member of a domain, power off the computer as 
follows:
1Click the Start button, then Shut down.
The Shut Down window appears.
2Select Shut down from the drop-down list.
3Click OK.
The computer turns itself off.
Turning off or shutting down more quickly
In addition to the method...

102
Learning the Basics
Using Turn Off or Shut down
5.375 x 8.375 ver 2.4.0
Sample TOSHIBA Power Saver Properties window
4Click Details in the Running on batteries section.
The Full Power Properties window appears. 

103
Learning the Basics
Using Turn Off or Shut down
5.375 x 8.375 ver 2.4.0
5Click the System Power Mode tab.
Sample Full Power Properties window
6Select Power Off for the options you want.
❖When I press the power button
Set this option to Power Off if you want the computer 
to turn off when you press the power button.
❖When I close the lid
Set this option to Power Off if you want the computer 
to turn off when you close the display panel.
7Click Override all Modes with settings here. 

104
Learning the Basics
Using Hibernation
5.375 x 8.375 ver 2.4.0
The Set the range window appears.
Sample Set the range window with DC only option 
8Do one of the following:
❖Click DC only if you want the settings to apply only 
when you are using battery power.
❖Click All for the settings to apply whether you are 
using battery power or outlet power.
9Click OK to close the Full Power Properties window.
10Click OK to close the TOSHIBA Power Saver Properties 
window, then close the Control Panel....

105
Learning the Basics
Using Hibernation
5.375 x 8.375 ver 2.4.0
3Double-click the To s h i b a  P o w e r  S a v e r  icon.
The TOSHIBA Power Saver Properties window appears.
Sample TOSHIBA Power Saver Properties window
4Click the Hibernate tab, then click the Enable 
hibernate support check box.
5Click OK to close the TOSHIBA Power Saver Properties 
window, then close the Control Panel.
Going into Hibernation mode
If you are using the Windows® XP Home operating system, 
or are using the Windows® XP...

106
Learning the Basics
Using Hibernation
5.375 x 8.375 ver 2.4.0
The Turn off computer window appears.
Sample Turn off computer window with shift key held down to 
show Hibernate option 
2Hold down the shift key and click Hibernate 
(“Hibernate” only appears when the shift key is pressed).
 
The computer saves the state of the system, including all 
open programs and files, to the hard disk. Then the computer 
turns itself off. 
If you are using the Windows
® XP Pro operating system and 
are a member of...

107
Learning the Basics
Using Hibernation
5.375 x 8.375 ver 2.4.0
❖By pressing the hotkey combination Fn+F4
To put the computer into Hibernation mode by pressing the 
power button and/or closing the display, you must preset the 
mode:
1Click Start, Control Panel.
The Control Panel window appears.
2Click Performance and Maintenance.
3Double-click the To s h i b a  P o w e r  S a v e r  icon.
The TOSHIBA Power Saver Properties window appears.
Sample TOSHIBA Power Saver Properties window
4In the Running on...

108
Learning the Basics
Using Hibernation
5.375 x 8.375 ver 2.4.0
5Click the System Power Mode tab.
Sample Full Power Properties window
6Select Hibernation for the options you want.
❖ When I press the power button
Set this option to Hibernation so that the computer 
will go into Hibernation mode when you press the 
power button.
❖When I close the lid
Set this option to Hibernation so that the computer 
will go into Hibernation mode when you close the 
display panel. 

109
Learning the Basics
Using Hibernation
5.375 x 8.375 ver 2.4.0
7Click Override all Modes with settings here.
The Set the range window appears.
Sample Set the range window with DC only option 
8Do one of the following:
❖Click DC only if you want the settings to apply only 
when you are using battery power.
❖Click All for the settings to apply whether you are 
using battery power or outlet power.
9Click OK to close the Full Power Properties window.
10Click OK to close the TOSHIBA Power Saver Properties...

110
Learning the Basics
Using Stand by
5.375 x 8.375 ver 2.4.0
Using Stand by 
If you are using the Windows® XP Home operating system, 
or are using the Windows® XP Pro operating system and are 
not a member of a domain, power off the computer using the 
Stand by command as follows:
1 Click Start, Turn off computer.
The Turn off computer window appears.
Sample Turn off computer window 
2Click Stand By.
 
The computer saves the state of all open programs and files to 
memory, turns off the display, and...