Toshiba S70b Owners Manual

Real-Time ClockProblemProcedureThe BIOS setting
and system date/
time are lost.The lasting time of the Real-Time Clock (RTC) has run out. You must set the date and time in the
BIOS setup utility by using the following steps:
1. Click the power icon ( 
 ) on the Start screen
and then select  Restart.
2. Hold down the  F2 key and then release this
key one second after the computer is power
on. The BIOS setup utility will load.
3. Set the date in the  System Date field.
4. Set the time in the  System Time...

ProblemProcedureMarkings appear on
the computer's
display panel.These marks might have come from contact with the keyboard and Touch Pad while the display
panel has been closed. Try to remove the marks
by gently wiping the display panel with a clean dry
cloth or, if this fails, with a good quality LCD screen
cleaner. In this latter instance, you should always
follow the instructions with the screen cleaner and always ensure that you let the display panel dry
properly before closing it.
Hard Disk...

ProblemProcedureYou cannot access a
CD/DVD/Blu-ray
Disc™ in the driveMake sure the drive’s disc tray is securely closed. Press gently until it clicks into place.
Open the disc tray and make sure the disc is
properly seated. It should lie flat with the label
facing up.
A foreign object in the disc tray could block laser
light from reading the disc. Make sure there is no
obstruction. Remove any foreign object.
Check whether the disc is dirty. If it is, wipe it with
a clean cloth dipped in water or a...

ProblemProcedureOn-screen pointer
does not respond to
pointing device
operationIn this instance, the system might be busy. Try
moving the mouse again after waiting a short
while.Double-tapping
(Touch Pad) does
not workIn this instance, you should initially try changing
the double-click speed setting within the Mouse
Control utility.
1. To access this utility, click  Control Panel ->
Hardware and Sound -> Mouse  under
Windows System  in the Apps view.
2. Within the Mouse Properties window, click the...

ProblemProcedureDouble-clicking does
not workIn this instance, you should initially try changing the double-click speed setting within the Mouse
Control utility.
1. To access this utility, click  Control Panel ->
Hardware and Sound -> Mouse  under
Windows System  in the Apps view.
2. Within the Mouse Properties window, click the Buttons  tab.
3. Set the double-click speed as required and click  OK.The on-screen
pointer moves too
fast or too slowIn this instance, you should initially try changing the...

Sleep and Charge function
For more information and settings, refer to the USB Sleep and Charge
section.
ProblemProcedureI cannot use the
Sleep and Charge
function.Sleep and Charge function might be disabled.
Enable the  Sleep and Charge  function in the
TOSHIBA System Settings.
When there is a current overflow of the external
device connected to the compatible port, USB bus
power (DC5V) supply might be stopped for safety
reasons. When this happens, disconnect an
external device if some external devices...

ProblemProcedureThe "USB Wakeup
function" does not
work.When Sleep and Charge function is enabled, the
"USB WakeUp" function does not work for ports
that support the Sleep and Charge function.
In that case, use an USB port that does not have
the USB Sleep and Charge function or change to
disable Sleep and Charge function.
Sound system
In addition to the information in this section, also refer to the documentationsupplied with your audio device.
ProblemProcedureNo sound is heardPress the...

ProblemProcedureMonitor does not
turn onAfter confirming that the monitor's power switch is
on, you should check the connections to make
sure that the power cord/adaptor is firmly
connected to the monitor and to a working power outlet.No displayTry adjusting the contrast and brightness controlson the external monitor.
Press the function key in order to change the
display priority and ensure that it is not set for the
internal display only.
Check to see if the external monitor is connected.
When the...

ProblemProcedureWake-up on LAN
does not workMake sure the AC adaptor is connected. The
Wake-up on LAN function consumes power even
when the system is off.
Check to make sure fast startup is disabled:
1. Click  Control Panel -> System and Security
-> Power Options  under Windows System
in the Apps view.
2. Click  Choose what the power button does
or  Choose what closing the lid does .
3. Click  Change settings that are currently 
unavailable .
4. Clear the  Turn on fast startup  check box.
5. Click the...

TOSHIBA supportIf you require any additional help using your computer or if you are havingproblems operating the computer, you might need to contact TOSHIBA foradditional technical assistance.
Before you call Some problems you experience might be related to software or the
operating system so it is important that you investigate other sources of
assistance first. Before contacting TOSHIBA, try the following:
Review troubleshooting sections in the documentation supplied with your software and/or...