Toshiba Projector Tlp Xc3000 User Manual

Others
Maintenance
Operations
Preparations
Before Using
OWNER’S MANUAL
3LCD DATA PROJECTOR
TLP-X3000
TLP-XC3000
(With Document Camera)
TLP-X3000 

Before Using
3
2
SAFETY PRECAUTIONSBefore Using
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended
to alert the user to the presence of uninsulated dangerous voltage within the products
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the
literature...

Before Using
5
4
5. Heat
The product should be situated
away from heat sources such as
radiators, heat registers, stoves, or
other products (including
amplifiers) that produce heat.
6. Water and Moisture
Do not use this product near water.- for example, near a bath tub,
wash bowl, kitchen sink, or laundry
tub; in a wet basement; or near a
swimming pool and the like.
7. Cleaning
Unplug this product from the wall
outlet before cleaning.  Do not use
liquid cleaners or aerosol cleaners.
Use a soft cloth for...

Before Using
7
6
IMPORTANT SAFETY INSTRUCTIONS  (Continued)
15. Accessories
Do not place this product on an
unstable cart, stand, tripod,
bracket, or table.  The product may
fall, causing serious injury to a
child or adult, and serious damage
to the product.  A product and cart
combination should be moved with
care.  Quick stops, excessive
force, and uneven surfaces may
cause the product and cart
combination to overturn.
S3125A
16. Damage Requiring Service
Unplug this product from the wall
outlet and...

Before Using
89
If your line voltage is 220 to 240V, use one of the following types of cable.Plug
configurationPlug type
Australian
240V
10A
North American240V
15A Switzerland
240V
6A Line voltage
EURO
UK220 – 240V
220 – 240V200 – 240V
200 – 240V 200 – 240V
Plug
configurationPlug type Line voltage
Use a 5A fuse which is approved by ASTA 
or BSI to BSI362.
Always replace the fuse cover after 
changing the fuse.IMPORTANT PRECAUTIONSSave Original Packing MaterialsThe original shipping carton and packing...

Before Using
1011
Avoid Volatile LiquidDo not use volatile liquids, such as an insect spray, near the unit.  Do not leave rubber or
plastic products touching the unit for a long time.  They will leave marks on the finish.
If cleaning with a chemically saturated cloth, be sure to follow the products precautions.LCD Panel• If the air filter is stained and is clogged up, the main unit inner temperature rises. As a
result, the life of the LCD is shortened and a malfunction may also occur.
Clean the air...

Before Using
13
12
CONTENTSBefore UsingSAFETY PRECAUTIONS ........................................................................\
.......... 2
IMPORTANT SAFETY INSTRUCTIONS ........................................................... 4
POWER SUPPLY CORD SELECTION .............................................................. 9
IMPORTANT PRECAUTIONS ........................................................................\
... 9
EXEMPTION CLAUSES...

15
14
Preparations
◆The Supplied CD-ROMThe supplied CD-ROM contains an owner’s manual, including information not available for
the printed Owner’s manual (Getting started) and Acrobat
® Reader™ to view the manual.
■Installing Acrobat
® Reader™
(Not necessary if Acrobat
® Reader™ has already been installed in your computer)
Windows
®: Run the CD-ROM, select the Reader/English folder, and run ar500enu.exe.
Follow the on-screen instructions.
Macintosh: Run the CD-ROM, select the Reader/English folder, and...

17
16
Preparations
Names of each part on the control panel and remote control
Control panel Remote Control (TLP-X3000)
Name : Main Function
Control panel(1) ENTER button : Accepts the selected mode.
(2) MENU button : Displays menus. 
p.36
(3) KEYSTONE button : Adjusts keystone distortion. 
p.29
(4) ON/STANDBY button : Turns the power on/off (standby). 
p.25
(5) ON/STANDBY indicator : Displays whether power is on or off (standby). 
p.25
(6) INPUT button : Selects input. 
p.27
(7) RETURN button : Goes back...

19
18
Preparations
Names of the terminals on the rear panel
(1) (2) (3) (4) (6) (8) (9)
(5) (7)
COMPUTER 2 IN
(Y/P
B/PR 2)
/MONITOR OUT
Names of each part on the document camara 
(models with a document camera)
Name : Main Function
Camera(1) LED illumination : The illumination LED for referring documents. 
p.46
(2) Focus ring : Adjusts the focus. 
p.47
(3) Camera lens : The camera lens of the document camera.
(4) Camera arm : Adjusts the camera angle. 
p.45
(5) Infrared remote sensor : Senses commands...