Toshiba Projector Tlp S30 User Manual

Others
Maintenance
Operations
Preparations
Before Using
TLP-T50M / TLP-T50 / TLP-S30
OWNER’S MANUAL
3LCD DATA PROJECTOR
TLP-T50M(XGA / with a mouse remote control)
TLP-T50(XGA)
TLP-S30(SVGA) 

Before Using
23
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to aler t the user
to the presence of uninsulated dangerous voltage
within the products enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
WARNING:TO...

Before Using
45
5. Heat
The product should be situated
away from heat sources such as
radiators, heat registers, stoves, or
other products (including
amplifiers) that produce heat.
6. Water and Moisture
Do not use this product near water.
- for example, near a bath tub,
wash bowl, kitchen sink, or laundry
tub; in a wet basement; or near a
swimming pool and the like.
7. Cleaning
Unplug this product from the wall
outlet before cleaning.  Do not use
liquid cleaners or aerosol cleaners.
Use a soft cloth for...

Before Using
67
IMPORTANT SAFETY INSTRUCTIONS  (Continued)16. Damage Requiring Service
Unplug this product from the wall
outlet and refer servicing to
qualified service personnel under
the following conditions:
a) When the power-supply cord or
plug is damaged.
b) If liquid has been spilled, or
objects have fallen into the
product.
c) If the product has been exposed to
rain or water.
d) If the product does not operate
normally by following the operating
instructions.  Adjust only those
controls that are...

Before Using
89
IMPORTANT PRECAUTIONS  (Continued)
Avoid Volatile  LiquidDo not use volatile liquids, such as an insect spray, near the unit.  Do not leave rubber or
plastic products touching the unit for a long time.  They will leave marks on the finish.
If cleaning with a chemically saturated cloth, be sure to follow the products precautions.LCD PanelThe life of the LCD panel is limited.  Take care over the points below so as to use the panel
for years.
•To prolong the life of this panel, never fail to...

Before Using
1011
OTHER CAUTIONS AND INFORMATIONSCopyrightsPublicly showing or transmitting commercial imaging software or broadcast or Cable-broad
casting programs, either commercially or collecting a fee from the audience, or modifying
images using the freeze or resize functions, could violate the direct or indirect copyrights of
the imaging software or broadcast program, etc., if done without first consulting with the
copyright holder.  For this reason, please take appropriate measures before...

13
Preparations
12
(1) (2) (3) (4) (5)
(6) (7) (7)(8) (9)
(5)
(4)
(10)
(11)
(12) (14) (13)
(14)
(8)
(12) (9) (15)
(16)CAUTION Label
CAUTION Label
MODEL NO./
RATING LabelWARNING Label WARNING Label
SERIAL NO. Label
Name : Function
(1) Lens : Projects expanded image
(2) Zooming lever : Adjusts screen size 
p.22
(3) Focusing ring : Adjusts screen focus 
p.22
(4) Infrared remote sensor : Senses commands from the remote control 
p.16
(5) Control panel : Operates the projector 
p.14
(6) AC IN socket : Connect...

15
Preparations
14
(1) (6) (2)(3) (4) (5)
COMPUTER(
Y/PB/PR )
S-VIDEO VIDEOVIDEO
AUDIO
MONITOR
CONTROL
(1) COMPUTER terminal
Input RGB signal from a computer or other source, or a component video signal (Y/P
B/
P
R) from video equipment.
(2) MONITOR terminal
Connect to a computer display, etc.
(3) S-VIDEO terminal
Input S video signals from video equipment.
(4) VIDEO terminal
Input video signals from video equipment.
(5) AUDIO terminal
Input audio signals from a computer or video equipment.
(6) CONTROL...

17
Preparations
16
Placement StylesAs shown in the figures below, this device can be placed in 4 different styles.
The factory setting is “floor-mounted front projection.” Set the placement style in the
default setting menu 
p.28
, in accordance with your needs.
Projection Distance and Screen SizeUse the figures, table, and formula below to determine the screen size and projection
distance. (Screen sizes are approximate values for full-size picture and no keystone
adjustment)
90°
a
90°...

19
Operations
18
Connecting the power cord1
Insert the power cord connector into the AC IN socket of the projector.
2
Insert the power cord plug into a wall or other power outlet.
Removing the lens cover
Be sure to remove the lens cover when the power is
turned on. If it is left on, it could become deformed due
to heat.
 Turning the power on
Press the ON/STANDBY
button.The power turns on, and the
following 3 green indicators light:
ON, LAMP, and FAN. After a
moment, the start-up screen
appears. CAUTION...