Toshiba Projector Tlp 791 User Manual

1
Before use
CONTENTS
OWNER’S MANUAL
3LCD DATA PROJECTOR
TLP790
TLP791
(
WITH DOCUMENT IMAGING CAMERA)
  MENU
TLP790 

2
Before use
CONTENTSSAFETY PRECAUTIONS
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated “dangerous
voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and
maintenance (servicing) instructions
in the literature accompanying...

3
Before use
CONTENTSIMPORTANT PRECAUTIONS
In the spaces provided below, record the Model and Serial No.
located at the bottom of your LCD projector.
Model No. 
  Serial No.
Retain this information for future reference. Save Original Packing Materials
The original shipping carton and packing materials will come in
handy if you ever have to ship your LCD projector. For maximum
protection, repack the set as it was originally packed at the factory.
Avoid Volatile Liquid
Do not use volatile liquids, such as...

4
Before use
CONTENTSIMPORTANT SAFETY INSTRUCTIONS
CAUTION: PLEASE READ AND
OBSERVE ALL WARNINGS
AND INSTRUCTIONS GIVEN
IN THIS OWNER’S MANUAL
AND THOSE MARKED ON
THE UNIT. RETAIN THIS
BOOKLET FOR FUTURE
REFERENCE.
This set has been designed and
manufactured to assure personal safety.
Improper use can result in electric shock or
fire hazard. The safeguards incorporated in
this unit will protect you if you observe the
following procedures for installation, use and
servicing. This unit is fully...

5
Before use
CONTENTS
5. Heat
The product should be situated away
from heat sources such as radiators,
heat registers, stoves, or other products
(including amplifiers) that produce heat.
IMPORTANT SAFETY INSTRUCTIONS (continued)
6. Water and Moisture
Do not use this product near water – for
example, near a bath tub, wash bowl,
kitchen sink, or laundry tub; in a wet
basement; or near a swimming pool and
the like.7. Cleaning
Unplug this product from the wall outlet
before cleaning. Do not use liquid...

6
Before use
CONTENTS
11. Object and Liquid Entry
Never push objects of any kind into this
product  through openings as they may
touch dangerous voltage points or short-
out parts that could result in a fire or
electric shock. Never spill liquid of any
kind on the product.
12. Do not place the product vertically
Do not use the product in the upright
position to project the pictures at the
ceiling, or any other vertical positions.
It may fall down and dangerous.
IMPORTANT SAFETY INSTRUCTIONS (continued)...

7
Before use
CONTENTS
17. If glass components, including lens
and lamp, should break, contact your
dealer for repair service.
This product incorporates glass
components, including a lens and a
lamp. If such parts should break, please
handle with care to avoid injury and
contact your dealer for repair service.
The broken pieces of glass may cause
to injury.
In the unlikely event of the lamp
rupturing, thoroughly clean the area
around the projector and discard any
edible items placed in that area.
18....

8
Before use
CONTENTSIMPORTANT SAFETY INSTRUCTIONS (continued)
21. Do not get your hands between the
camera arm and the main unit when
setting the camera arm back in its
original position.
To avoid injury, be careful not to get your
hands caught when setting the camera
arm back in its original position. Families
with children should be particularly
careful.
22. Do not carry by the camera arm.
Do not carry the projector by the camera
arm.
Doing so can result in damage or injury.23. Do not leave documents...

9
Before use
CONTENTSPower supply cord selection
If your line voltage is 220 to 240V, use one of
the following types of cable.
Plug
configurationPlug type
EURO
240V
10 – 15A
UK
240V
6A
Australian
240V
10A
North American
240V
15A
Switzerland
240V
6A
Line voltage
220 – 240V
200 – 240V
200 – 240V
200 – 240V
200 – 240V
Plug
configurationPlug type
EURO
UK
Line voltage
220 – 240V
220 – 240V
Use a 5A fuse which is approved by ASTA
or BSI to BSI362.
Always replace the fuse cover after
changing the fuse. 

10
Before use
CONTENTSContents
Before use
SAFETY PRECAUTIONS ......................................................2
IMPORTANT PRECAUTIONS ...............................................3
IMPORTANT SAFETY INSTRUCTIONS ...............................4
Power supply cord selection ...............................................9
Contents ..............................................................................10
Names of each part on the main unit ................................11
Names of each part...