Home > Toshiba > Projector > Toshiba Projector Tlp 680U User Manual

Toshiba Projector Tlp 680U User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Toshiba Projector Tlp 680U User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							CONTENTS1Before use
    TLP680U
    TLP681U
    OWNER’S MANUAL
    (WITH DOCUMENT IMAGING CAMERA )
    3LCD DATA PROJECTOR 
    						
    							CONTENTS2Before use
    SAFETY PRECAUTIONS
    The lightning flash with arrowhead
    symbol, within an equilateral triangle,
    is intended to alert the user to the
    presence of uninsulated “dangerous
    voltage” within the product’s
    enclosure that may be of sufficient
    magnitude to constitute a risk of
    electric shock to persons.
    The exclamation point within an
    equilateral triangle is intended to
    alert the user to the presence of
    important operating and
    maintenance (servicing) instructions
    in the literature accompanying the
    appliance.
    WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
    APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE
    PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER
    SERVICING TO QUALIFIED PERSONNEL ONLY.
    FCC Radio Frequency Interference Statement
    Note:This equipment has been tested and found to comply with the limits for a Class A
    digital device, pursuant to part 15 of the FCC Rules.  These limits are designed to
    provide reasonable protection against harmful interference when the equipment is
    operated in a commercial environment.  This equipment generates, uses, and can
    radiates radio frequency energy and, if not installed and used in accordance with the
    instruction manual, may cause harmful interference to radio communications.
    Operation of this equipment in a residential area is likely to cause harmful
    interference in which case the user will be required to correct the interference at his
    own expense.
    WARNING:Changes or modifications made to this equipment, not expressly approved by
    Toshiba, or parties authorized by Toshiba, could void the user’s authority to operate
    the equipment.
    Notice:This Class A digital apparatus complies with Canadian ICES-003.
    Cet appareil numérique de la classe A est conforme à la norme NMB-003 du
    Canada.
    CAUTION:Laser beam is emitted when the laser button of the remote control is pressed. Do not
    look from the front of the remote control. Do not face toward a person or to a mirror. 
    						
    							CONTENTS3Before use
    IMPORTANT PRECAUTIONSIn the spaces provided below, record the Model and Serial No. located
    at the rear of your LCD projector.
    Model No. 
      Serial No. 
    Retain this information for future reference.
    Save Original Packing Materials
    The original shipping carton and packing materials will come in
    handy if you ever have to ship your LCD projector. For maximum
    protection, repack the set as it was originally packed at the factory.
    Avoid Volatile  Liquid
    Do not use volatile liquids, such as an insect spray, near the unit.
    Do not leave rubber or plastic products touching the unit for a long
    time. They will mar the finish.
    Moisture Condensation
    Never operate this unit immediately after moving it from a cold
    location to a warm location. When the unit is exposed to such a
    change in temperature, moisture may condense on the crucial
    internal parts. To prevent the unit from possible damage, do not use
    the unit for at least 2 hours when there is an extreme or sudden
    change in temperature. 
    						
    							CONTENTS4Before use
    IMPORTANT SAFETY INSTRUCTIONS
    CAUTION: PLEASE READ AND OBSERVE
    ALL WARNINGS  AND
    INSTRUCTIONS GIVEN IN THIS
    OWNERÕS MANUAL AND THOSE
    MARKED ON THE UNIT. RETAIN
    THIS BOOKLET FOR FUTURE
    REFERENCE.
    This set has been designed and manufactured
    to assure personal safety. Improper use can
    result in electric shock or fire hazard. The
    safeguards incorporated in this unit will protect
    you if you observe the following procedures for
    installation, use and servicing. This unit is fully
    transistorized and does not contain any parts
    that can be repaired by the user.
    DO NOT REMOVE THE CABINET COVER, OR
    YOU MAY BE EXPOSED TO DANGEROUS
    VOLTAGE. REFER SERVICING TO
    QUALIFIED SERVICE PERSONNEL ONLY.
    1. Read OwnerÕs Manual
    After unpacking this product, read the
    ownerÕs manual carefully, and follow all the
    operating and other instructions.
    2. Power Sources
    This product should be operated only from
    the type of power source indicated on the
    marking label. If you are not sure of the type
    of power supply to your home, consult your
    product dealer or local power company.
    For products intended to operate from
    battery power, or other sources, refer to the
    operating instructions.3. Source of Light
    Do not look into the lens while the lamp is
    on.  The strong light from the lamp may
    cause damage to your eyes or sight.
    4. Ventilation
    Openings in the cabinet are provided for
    ventilation and to ensure reliable operation
    of the product and to protect it from
    overheating, and these openings must not
    be blocked or covered. The openings
    should never be blocked by placing the
    product on a bed, sofa, rug or other similar
    surface. This product should not be placed
    in a built-in installation such as a bookcase
    or rack unless proper ventilation is provided
    or the manufacturerÕs instructions have
    been adhered to. 
    						
    							CONTENTS5Before use
    5. Heat
    The product should be situated away from
    heat sources such as radiators, heat
    registers, stoves, or other products
    (including amplifiers) that produce heat.
    IMPORTANT SAFETY INSTRUCTIONS
    6. Water and Moisture
    Do not use this product near water Ð for
    example, near a bath tub, wash bowl,
    kitchen sink, or laundry tub; in a wet
    basement; or near a swimming pool and the
    like.7. Cleaning
    Unplug this product from the wall outlet
    before cleaning. Do not use liquid cleaners
    or aerosol cleaners. Use a damp cloth for
    cleaning.
    8. Power-Cord Protection
    Power-supply cords should be routed so
    that they are not likely to be walked on or
    pinched by items placed upon or against
    them, paying particular attention to cords at
    plugs, convenience receptacles, and the
    point where they exit from the product.9. Overloading
    Do not overload wall outlets; extension
    cords, or integral convenience receptacles
    as this can result in a risk of fire or electric
    shock.
    10. Lightning
    For added protection for this product during
    storm, or when it is left unattended and
    unused for long periods of time, unplug it
    from the wall outlet.
    This will prevent damage to the product due
    to lightning and power-line surges. 
    						
    							CONTENTS6Before use
    11. Object and Liquid Entry
    Never push objects of any kind into this
    product  through openings as they may
    touch dangerous voltage points or short-out
    parts that could result in a fire or electric
    shock. Never spill liquid of any kind on the
    product.
    IMPORTANT SAFETY INSTRUCTIONS
    12. Do not place the product vertically
    Do not use the product in the upright
    position to project the pictures at the
    ceiling, or any other vertical positions.
    It may fall down and dangerous.13. Stack Inhibited
    Do not stack other equipment on this
    product or do not place this product on the
    other equipment.
    Top and bottom plates of this product
    develops heat and may give some
    undesirable damage to other unit.
    14. Attachments
    Do not use attachments not recommended
    by the product manufacturer as they may
    cause hazards.15. Accessories
    Do not place this product on an unstable
    cart, stand, tripod, bracket, or table. The
    product may fall, causing serious injury to a
    child or adult, and serious damage to the
    product. Use only with a cart, stand, tripod,
    bracket, or table recommended by the
    manufacturer, or sold with the product. Any
    mounting of the product should follow the
    manufacturerÕs instructions, and should use
    a mounting accessory recommended by the
    manufacturer.
    A product and cart combination should be
    moved with care. Quick stops, excessive
    force, and uneven surfaces may cause the
    product and cart combination to overturn.
    S3125A 
    						
    							CONTENTS7Before use
    16. Damage Requiring Service
    Unplug this product from the wall outlet and
    refer servicing to qualified service
    personnel under the following conditions:
    a) When the power-supply cord or plug is
    damaged.
    b) If liquid has been spilled, or objects have
    fallen into the product.
    c) If the product has been exposed to rain or
    water.
    d) If the product does not operate normally by
    following the operating instructions. Adjust
    only those controls that are covered by the
    operating instructions as an improper
    adjustment of other controls may result in
    damage and will often require extensive
    work by a qualified technician to restore the
    product to its normal operation.
    e) If the product has been dropped or
    damaged in any way.
    f) When the product exhibits a distinct change
    in performance Ð this indicates a need for
    service.
    IMPORTANT SAFETY INSTRUCTIONS
    17. Servicing
    Do not attempt to service this product
    yourself as opening or removing covers
    may expose you to dangerous voltage or
    other hazards. Refer all servicing to
    qualified service personnel.
    18. Replacement Parts
    When replacement parts are required, be
    sure the service technician has used
    replacement parts specified by the
    manufacturer or have the same
    characteristics as the original part.
    Unauthorized substitutions may result in
    fire, electric shock, or other hazards.
    (Replacement of the lamp only should be
    made by users.)19. Safety Check
    Upon completion of any service or repairs
    to this product, ask the service technician to
    perform safety checks to determine that the
    product is in proper operating condition.
    20. Do not get your hands between the
    camera arm and the main unit when
    setting the camera arm back in its
    original position.
    To avoid injury, be careful not to get your
    hands caught when setting the camera arm
    back in its original position. Families with
    children should be particularly careful. 
    						
    							CONTENTS8Before use
    IMPORTANT SAFETY INSTRUCTIONS
    21. Do not carry by the camera arm.
    Do not carry the projector by the camera
    arm.
    Doing so can result in damage or injury.
    22. Do not leave documents on the unit for
    long periods of time while using the
    document imaging function.
    Do not leave texts, papers or other
    documents for projection on the unit for
    long periods of time. The heat could erase
    the letters on a thermal paper.23. Do not move the projector while the arm
    is still erect.
    Always store the arm back in position when
    moving the projector. Otherwise injury or
    damage may result.
    24. Do not look into the arm light while it is lit.
    The strong light may cause damage to your
    eyes or sight.25. If glass components, including lens and
    lamp, should break, contact your dealer
    for repair service.
    This product incorporates glass
    components, including a lens and a lamp. If
    such parts should break, please handle
    with care to avoid injury and contact your
    dealer for repair service. The broken pieces
    of glass may cause to injury. 
    						
    							CONTENTS9Before use
    Power supply cord
    selection
    If your line voltage is 220 to 240, use one of the
    following types of cable.
    Plug type
    EURO
    240V
    10 – 15A
    UK
    240V
    6A
    Australian
    240V
    10A
    North American
    240V
    15A
    Switzerland
    240V
    6A
    Line voltage
    220 – 240V
    200 – 240V
    200 – 240V
    200 – 240V
    200 – 240V
    Plug
    configuration 
    						
    							CONTENTS10Before use
    Contents
    Before use
    SAFETY PRECAUTIONS ...............................................................2
    IMPORTANT PRECAUTIONS ....................................................... 3
    IMPORTANT SAFETY INSTRUCTIONS ..................................... 4
    Power supply cord selection ............................................................. 9
    Part names and functions .............................................................. 11
    Connections and installation
    Connections ........................................................................\
    ............16
    Projector placement ........................................................................\
     18
    Operations
    Picture projection ........................................................................\
    ...21
    Operating the computer by the remote control .............................. 25
    Adjustments
    Settings and adjustments on the menu ..........................................27
    Initial settings – Default ................................................................. 28
    Keystone correction – Keystone ..................................................... 30
    Projection adjustments – Image ..................................................... 31
    Picture adjustments – Picture ........................................................ 32
    Sound adjustments – Audio ............................................................ 33
    Saving data – Save ........................................................................\
    .. 34
    Camera
    Part names and functions of document imaging camera .............35
    Picture projection with the document imaging camera ................ 37
    Overlaying projection ..................................................................... 39
    Maintenance
    Trouble indications ........................................................................\
    .40
    Air filter, lens and main unit cleaning ........................................... 41
    Lamp replacement ........................................................................\
    .. 42
    Others
    Before calling service personnel ....................................................43
    Input signal ........................................................................\
    ............. 45
    Adjustments with RS-232C ............................................................ 49
    Specifications ........................................................................\
    .......... 51 
    						
    All Toshiba manuals Comments (0)

    Related Manuals for Toshiba Projector Tlp 680U User Manual