Toshiba Projector Tlp 380 User Manual
Have a look at the manual Toshiba Projector Tlp 380 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
41 Operations CONTENTS CALL Notes •The information displayed is not refreshed even if it changes. To refresh the information, turn off the information display, then turn it back on. •The information display turns off if any other operation is performed. •The “Lamp time” shows an approximate time for lamp replacement. (It should not be used as a lamp warranty time counter.) If the time indicated here nears 1000H, contact your store of purchase about obtaining a replacement lamp (TLPL78, sold separately). •The “Lamp time” can be reset when the lamp is replaced. •The “Version” is the version of the control program used in the projector and is used for servicing, etc. MENU ON /INPUT ENTER CT-90113 KEYSTONE AUTO SET EXIT PIP FREEZE MUTE CALLRESIZE VOL / ADJ STANDBY CALL Displaying Information Information on the input signal source, etc., can be displayed. Remote controlPress CALL. The information described below is displayed. The information display turns off when the CALL button is pressed again. Status display Input - current input source H-resolution - the horizontal resolution of the input signal (at RGB input) V-resolution - the vertical resolution of the input signal (at RGB input) H-frequency - the horizontal frequency of the input signal (at RGB input) V-frequency - the vertical frequency of the input signal (at RGB input) Sync - the polarity of the sync signal (at RGB input) Video mode - the color mode of the video signal (at Video, S-Video input) Signal format - the formatting of the Y/P B/PR signal (at Y/PB/PR input) Lamp time - the elapsed usage time of the lamp Version - the version of the firmware Shutter - the shutter speed of the document imaging camera (at document imaging camera input)
42 Operations CONTENTSOperating a computer by the remote control (optional) Notes • Ask your dealer about the optional remote control. •This function is available with Windows98/98SE, Windows Me, Windows2000, Windows XP and Mac OS9 computers equipped with a USB por t as standard. •When connecting to the computer’s USB por t for the first time, a message asking you to inser t the Windows98 CD-ROM may appear on the computer’s monitor screen, depending on whether or not the device driver is installed. If so, do as the message says. •When using a USB cable, be sure to use a shielded type. You can control a computer by the optional remote control when the projector and computer are connected with USB cable. In this manual, this function is explained as “mouse remote control”. MENUON/STANDBY INPUT ENTER KEYSTONEAUTO SET EXIT PIP FREEZE MUTE CALLRESIZE VOLUME/ADJUST LASER MENUON/STANDBY INPUT L-CLICK R-CLICK ENTER KEYSTONEAUTO SET EXIT PIP FREEZE MUTE CALLRESIZE VOLUME/ADJUST LASER USBCOMPUTER IN 1COMPUTER IN 2 S-VIDEO VIDEOVIDEO INR - AUDIO - LAUDIO IN ( Y/PB/PR )MONITOR OUTCONTROL R-CLICK L-CLICK To USB connector Be sure to connect in the proper direction.Pointer control USB cable (Not supplied) To USB port Computer Remote control (optional) Point the remote control at the remote control sensor on the projector when operating its buttons. •To move the pointer Press the outer side of the pointer control button in the direction in which you want to move the pointer. (The speed at which the pointer moves depends on how strongly the button is pressed.) •To click Press L-CLICK or the center of the pointer control. •To right-click Press R-CLICK. •To drag and drop While holding down the center of the pointer control, press the rim side to move the pointer to the desired spot, then release the center part.
43CONTENTS Adjustments & Settings Operating the menu screen Continued KEYSTONE AUTOSET EXIT ON / STANDBY VOL / ADJ ENTER MENU INPUT FANTEMPLAMPON VOL/ADJSelection MENUENTEREXIT Control panel (Main unit side) Remote control FULLItemNextQuit Adjust the image brightness. Select the image with its brightness priority or quality (color)priority.Correct the keystone distortion of the screen.Select the input source when changing the input. Adjust the image flicker. EXITENTERMENU GUIDE MENUAnalog RGB Items Button operation guideThe current input source MENU ENTER CT-90113EXIT VOL / ADJ End Press MENU.Then GUIDE MENU appears. When you make more detailed adjustments and settings, call the FULL MENU. Return to the GUIDE MENU when the MENU button is pressed. Press MENU button once again. The FULL MENU of [Picture] appears. FULL MENU has seven pages of [Picture], [Position], [Color], [Audio], [Display], [Default setting] and [Reset]. Use the selection button ( ) to change the page of FULL MENU. / [Picture][Position][Color] [Default setting][Reset][Display][Audio] Select the item with the selection button ( ). / Press ENTER to confirm. The item selected can be adjusted or set. Press EXIT and return. When you select other items, press EXIT repeatedly until GUIDE MENU appears. When you want to quit, press EXIT repeatedly until GUIDE MENU disappears. StartFULL MENU: For the operating instruction, refer to the next page. GUIDE MENU: You can adjust or set the functions used frequently. Adjust and set it with the button indicated on the button operation guide. According to the selected item, the kind ([adjustment],[setting] or [execution]) and the button to be used are indicated on the button operation guide. Selection VOL/ADJ MENU ENTER EXIT MENU MENUMENU MENU ENTER ENTER EXIT EXIT 44 Various adjustments and settings can be made on the menu screen. The basic operations on the menu screen are shown here.
44CONTENTS Adjustments & Settings Operating the menu screen (continued) Analog RGB GUIDEItemExecuteQuit Picture Contrast-12- -12- Bright FullFull Thru Brightness Picture mode Screen size Reset EXITENTERMENUPageAdjust Kind (page) of FULL MENU Items Button operation guide The current input source Adjustment display bar Choices End Select the item with selection buttons ( ). The figure below is a sample for explanation. This status does not really exist./ Press ENTER. The Item selected is executed. FULL MENU is displayed after execution. Press ENTER. An object can be selected from the sub menu list. Start Select it with the button indicated on the button operation guide. For the selection method of FULL MENU, refer to the previous page. Press ENTER.Only the (small list of the) selected adjusting items is displayed. This is useful as you can see a main picture not hidden under FULL MENU. Adjust with VOL/ADJ (+/-) or selection buttons ( ). / Press EXIT. FULL MENU is displayed and you can select other items. Press EXIT. FULL MENU disappears, and adjustment or setting is finished. Method -1 Method -2Adjust with VOL/ADJ (+/-) Press the selection button ( ) when selecting other items continuously./ MENU ENTER CT-90113EXIT VOL / ADJ Remote control Selection VOL/ADJ MENU ENTER EXIT ENTER ENTER ENTER ENTER ENTER ENTER EXIT EXIT EXIT EXIT At the items whose [Execute] is displayed on the operation guide; At the items whose the adjustment bar is displayed; At the items whose the choices are displayed; KEYSTONE AUTOSETEXIT ON / STANDBY VOL / ADJ ENTERMENU INPUT FANTEMPLAMPON VOL/ADJ Selection MENUENTEREXIT Control panel (Main unit side)43 Note An exclusive menu is displayed when making PIP function sub-picture settings. 53
45CONTENTS Adjustments & Settings GUIDE MENU adjustments and settings Adjust the image brightness.Contrast Brightness Adjust the contrast of the picture. Adjust the brightness of the picture. ADJ. ADJ. Adjust the image flicker.PhaseAdjust the flicker of the picture. (Sampling clock phase adjustment)ADJ. Select the image with its brightness priority or quality (color) priority.BrightThe picture is set with its brightness priority.SET True colorThe picture is set with its color quality priority.SET Correct the keystone distortion of the screen.Auto. V-keystoneAdjust the vertical keystone distortion automatically. : COMPUTER IN 1 connector is selectable with the INPUT button. : COMPUTER IN 2 connector is selectable with the INPUT button. EXEC. VIDEO: Video input is selectable with the INPUT button.SET EXEC.To manual adjustmentAdjust the Vertical keystone.ADJ.V-keystone Adjust the Horizontal keystone.ADJ.H-keystone Select the input source when changing the input.SETCOMPUTER IN 1 : Use COMPUTER IN 1 connector as Analog RGB (1) input.SETAnalog RGB(1) : Use COMPUTER IN 1 connector as Y/PB/PR input.SETY/PB/PR SETCOMPUTER IN 2 : Use COMPUTER IN 2 connector as Analog RGB (2) input.SETAnalog RGB(2) : Use COMPUTER IN 2 connector as Digital RGB input.SETDigital RGB S-VIDEO: S-Video input is selectable with the INPUT button.SET CAMERA: Camera input is selectable with the INPUT button.SET Yes Yes Yes Adjust the image color.ColorAdjust the color depth of the picture.ADJ. Adjust the sensitivity of the document imaging camera.Camera gainAdjust the document imaging cameras gain.ADJ.Ye s---- -- ---- --Yes ---- Ye s (common for all of the inputs) Ye s (common for all of the inputs) Digital RGBY/PB/PRVideo The relationship between input source and item Yes: Adjustable -: Not displayed S-Video CameraAnalog RGB(1) Analog RGB(2) Select a shutter speed below to decrease the flickering of the document imaging cameras picture.Shutter The shutter speed is set automatically.SETAuto The shutter speed is fixed to 50 Hz.SET50Hz The shutter speed is fixed to 60 Hz.SET60Hz Ye s Yes Yes Yes Yes Yes Yes --- -Ye s Ye s Ye s---- Yes Yes - Restrain the flicker of the camera. : On/Off with ENTER: On/Off with ( ) or ( ) On GUIDE MENU, you can set or adjust the functions frequently used. To operate GUIDE MENU, refer to page 43. Notes • The items related to the camera (the document imaging camera) are displayed only with models having a camera. • “Sampling phase” is adjusted and memorized for each RGB signal 71. •“Keystone” and “Input source setting” can be adjusted (set) at all input sources, but the adjustments (settings) made at one input source are applied to all input sources. •It is impossible to exit from the menu if no input source is selected. •If the check in the check box for the currently selected source is removed, the setting becomes effective the next time the input is changed. •The adjustments or settings made are memorized automatically when the power is turned off by pressing the ON/STANDBY button. If the power cord is unplugged or if a power failure occurs while the projector is on, the adjustments or settings are not memorized.
46CONTENTS Adjustments & Settings FULL MENU adjustments and settings - Picture Contrast BrightnessAdjust the contrast of the picture. Adjust the brightness of the picture. ADJ. ADJ. SharpnessAdjust the sharpness of the picture. (In Y/PB/PR input mode, sharpness is a setting item.)ADJ. Picture modeBrightThe picture is set with its brightness priority.SET True colorThe picture is set with its color quality priority.SET Camera gainAdjust the document imaging cameras gain.ADJ.---- -- Reset EXEC. ---- Video modeAuto.The video mode (color system) is set automatically.SET NTSCThe video mode is fixed to NTSC system.SET PA LThe video mode is fixed to PAL system.SET SECAMThe video mode is fixed to SECAM system.SET PAL-NThe video mode is fixed to PAL-N system.SET PAL-MThe video mode is fixed to PAL-M system.SET PAL60The video mode is fixed to PAL60 system.SET NTSC4.43The video mode is fixed to NTSC4.43 system.SET Signal formatAuto.The Y/PB/PR signal format is set automatically.SET 525iThe Y/PB/PR signal format is fixed to 525i mode.SET 525pThe Y/PB/PR signal format is fixed to 525p mode.SET 625iThe Y/PB/PR signal format is fixed to 625i mode.SET 750pThe Y/PB/PR signal format is fixed to 750p mode.SET 1125iThe Y/PB/PR signal format is fixed to 1125i mode.SET ShutterAuto.The shutter speed is set automatically.SET 50HzThe shutter speed is fixed at 50 Hz.SET 60HzThe shutter speed is fixed at 60 Hz.SET --- - Screen sizeFullThe picture is converted to SVGA (800 x 600 dot) resolution.SET ThruThe picture is displayed with the input source resolution.SET WideThe picture is converted to wide screen format.SET Digital RGBY/PB/PRVideo The relationship between input source and item Yes: Adjustable -: Not displayed S-Video CameraAnalog RGB(1) Analog RGB(2) Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s --- ---Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye sYe s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s---- --Ye s ---Ye s Ye s Ye s ---- -Ye s Ye sYe s Ye s Ye s Ye s Return the adjustments and settings of FULL MENU [Picture] to the factory default values. You can make various adjustments or settings of the picture from FULL MENU [Picture]. To operate FULL MENU, refer to page 44. Notes •The items related to the camera (the document imaging camera) are displayed only with models having a camera. •A part of function is restricted if you set the “Video mode” or “Signal format” to the modes other than [Auto.] . 51 •The adjustments or settings made are memorized automatically when the power is turned off by pressing the ON/STANDBY button. If the power cord is unplugged or if a power failure occurs while the projector is on, the adjustments or settings are not memorized.
47CONTENTS Adjustments & Settings FULL MENU adjustments - Position H-position V-positionAdjust the horizontal display position of the picture. Adjust the vertical display position of the picture. ADJ. ADJ. PhaseAdjust the flicker of the picture. (Sampling clock phase adjustment)ADJ. FrequencyAdjust the sampling frequency of the input signal if vertical stripes appear in the detailed image.ADJ. ResetReturn the adjustments of FULL MENU [Position] to the factory default values.EXEC. ---- Yes Yes - ---- Yes Yes - ---- Yes Yes - ---- Yes Yes - ---- Yes Yes - Digital RGBY/PB/PRVideo The relationship between input source and item Yes: Adjustable -: Not displayed S-Video CameraAnalog RGB(1) Analog RGB(2) You can adjust the picture position etc. of the analog RGB input from FULL MENU [Position]. To operate FULL MENU, refer to page 44. Notes •This menu is not displayed except with analog RGB input. •The adjustment of each item in this menu is memorized for each RGB signal input 71. •The adjustments made are memorized automatically when the power is turned off by pressing the ON/STANDBY button. If the power cord is unplugged or if a power failure occurs while the projector is on, the adjustments are not memorized.
48CONTENTS Adjustments & Settings FULL MENU adjustments - Color Color TintAdjust the color depth of the picture. Adjust the tint of the picture. (Not adjustable at PAL, SECAM, PAL-N,PAL-M and PAL60) ADJ. ADJ. R-levelAdjust the red level of the picture.ADJ. G-levelAdjust the green level of the picture.ADJ. B-levelAdjust the blue level of the picture.ADJ. ResetReturn the adjustments of FULL MENU [Color] to the factory default value.EXEC. Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s ---- YesYes- -Yes-- YesYes- Digital RGBY/PB/PRVideo The relationship between input source and item Yes: Adjustable -: Not displayed S-Video CameraAnalog RGB(1) Analog RGB(2) You can adjust the color condition of the picture from FULL MENU [Color]. To operate FULL MENU, refer to page 44. Note The adjustments made are memorized automatically when the power is turned off by pressing the ON/STANDBY button. If the power cord is unplugged or if a power failure occurs while the projector is on, the adjustments are not memorized.
49CONTENTS Adjustments & Settings FULL MENU adjustments and settings - Audio VolumeAdjust the sound volume emitted from the speaker.ADJ. Speaker outputOnThe sound is emitted from the speaker.SET OffNo sound is emitted from the speaker.SET ResetReturn the adjustments and settings of FULL MENU [Audio] to the factory default values.EXEC.- - - LoudnessOnThe loudness effect is added to the speaker sound.SET OffThe loudness effect is not added to the speaker sound.SET Ye s (common) Ye s (common) Ye s (common) Ye s (common) Ye s (common) Ye s (common) Ye s (common) Ye s (common)- Channel selectL+RThe sound of the left and right channels is mixed and emitted from the speaker.SET LOnly the sound of the left input channel is emitted from the speaker.SET ROnly the sound of the right channel is emitted from the speaker.SET Ye s Ye s Ye s Ye s Ye s Ye s - Digital RGBY/PB/PRVideo The relationship between input source and item Yes: Adjustable -: Not displayed S-Video CameraAnalog RGB(1) Analog RGB(2) You can set the sound emitted from the speaker from FULL MENU [Audio]. To operate FULL MENU, refer to page 44. Notes •When the camera input is selected, sound is not emitted. •Each item can be set at every input source except the camera input, but the settings made at one input source are applied to all input sources as shown in the table. The sound volume can be adjusted for each input source except the camera input. •The adjustments or settings made are memorized automatically when the power is turned off by pressing the ON/STANDBY button. If the power cord is unplugged or if a power failure occurs while the projector is on, the adjustments or settings are not memorized.
50CONTENTS Adjustments & Settings FULL MENU adjustments and settings - Display V-keystoneAdjust the keystone distortion caused by changing the vertical installation angle.ADJ. LanguageEnglishMenus and messages are displayed in English.SET FrançaisMenus and messages are displayed in French.SET IconOn Off ResetReturn the adjustments and settings of FULL MENU [Display] to the factory default values.EXEC. PortuguêsMenus and messages are displayed in Portuguese.SET Menus and messages are displayed in Japanese.SET H-keystoneAdjust the keystone distortion caused by changing the horizontal installation angle.ADJ. DeutschMenus and messages are displayed in German.SET ItalianoMenus and messages are displayed in Italian.SET EspañolMenus and messages are displayed in Spanish.SET Menus and messages are displayed in Chinese (Simplified).SET Menus and messages are displayed in Chinese (Traditional).SET Menus and messages are displayed in Korean.SET The icon is displayed.SET The icon is not displayed.SET Menu translucentOn Off The menu background becomes translucent.SET The menu background is normal.SET Menu positionUpper left Upper right The menu is displayed at the upper left of the screen.SET The menu is displayed at the upper right of the screen.SET Lower leftThe menu is displayed at the lower left of the screen.SET Lower rightThe menu is displayed at the lower right of the screen.SET Ye s (common for all of the inputs) Ye s (common for all of the inputs) Ye s (common for all of the inputs) Ye s (common for all of the inputs) Ye s (common for all of the inputs) Ye s (common for all of the inputs) Ye s (common for all of the inputs) Digital RGBY/PB/PRVideo The relationship between input source and item Yes: Adjustable -: Not displayed S-Video CameraAnalog RGB(1) Analog RGB(2) You can set the language, menu display, etc. from FULL MENU [Display]. To operate FULL MENU, refer to page 44. Notes •Each item can be set at all input sources, but the settings made at one input source are applied to all input sources. •The adjustments or settings made are memorized automatically when the power is turned off by pressing the ON/STANDBY button. If the power cord is unplugged or if a power failure occurs while the projector is on, the adjustments or settings are not memorized. •The setting of “Menu translucent” is not available if no signal is input. Also the background of the menu will not be translucent, regardless of the settings.