Toshiba Projector Tdp S8 User Manual

11

Before Using

OTHER CAUTIONS AND INFORMATIONS
Copyrights
Showing  or  transmitting  commercial  imaging  software  or  broadcast  or  cable-broad  cast-
ing  programs  with  the  purpose  of  other  than  the  personal  and  private  viewing,  including 
modifying  images  using  the  freeze  functions,  or  displaying  with  the  varying  aspect  ratio 
of  the  images,  could  violate  the  direct  or  indirect  copyrights  of  the  imaging  software  or 
broadcast program, etc., if done without fi...

12

REMOTE CONTROL BATTERIES
Caution
•  Never throw batteries into a fire.
Notes
•  Be sure to use AA size batteries.
•  Dispose of batteries in a designated disposal area.
•  Attention should be drawn to the environmental aspects of battery disposal.
•  Do not mix different battery types or combine used batteries with new ones.
•  If  the  remote  control  does  not  operate  correctly,  or  if  the  operating  range  becomes  re
-duced, replace both batteries with new ones.
•  If  the  batteries  are...

13

Before Using

CONTENTS
Before Using
SAFETY PRECAUTIONS ..................................................................................................2
IMPORTANT SAFETY INSTRUCTIONS ...........................................................................4
POWER SUPPLY CORD SELECTION .............................................................................9
IMPORTANT PRECAUTIONS ...........................................................................................9
EXEMPTION CLAUSES...

14
Separately sold product ................................................................................................41
List of supported signals (RGB signals)  .......................................................................42
List of supported signals (Y/PB/PR signals)  .................................................................43
List of supported signals (Video, S-Video signals)  .......................................................43
Pin assignment of COMPUTER IN & MONITOR...

15
Preparations
Separately sold product ................................................................................................41
List of supported signals (RGB signals)  .......................................................................42
List of supported signals (Y/PB/PR signals)  .................................................................43
List of supported signals (Video, S-Video signals)  .......................................................43
Pin assignment of COMPUTER IN &...

16

Names of each part on the main unit
BackFront
(10)(11)
(9)
(8)
(8)
(13)
(6)
(1)
(4) (3)(2)
(5)
(7)(12)(14) (15)
  Name  :  Function
(1)  Lens  :  Projects expanded image. 
(2)  Infrared remote sensor  :  Senses commands from the remote control. 
p.19
(3)  Foot adjuster release button  :  Press to set up or stow the foot adjuster. p.24
(4)  Air exhaust  :  Expels air that has grown hot inside the projector.
(5)  Control panel  :  Operates the projector. p.17
(6)  Zooming lever :  Adjusts screen size....

17

Preparations

Names of each part on the control panel and remote control
Control panelRemote Control
  Name :  Main Function
Control panel
(1)  ENTER button  :  Accepts the selected mode.
(2)  MENU button :  Displays menus. p.30
(3)  KEYSTONE button  :  Adjusts keystone distortion. p.27
(4)  ON/STANDBY button  :  Turns the power on/off (standby). p.24
(5)  INPUT button :  Selects input. p.25
(6)  Selection button  :  Menu selections and adjustments. p.30
(7)  LAMP indicator  :  Displays lamp mode....

18

Parts on the rear panel
  Name :  Main Function
(1)  MONITOR terminal  :  Connect to a computer display, etc.
(2)  COMPUTER IN terminal  :  Input analog RGB signal from a computer or other 
source, or a component video signal (Y/PB/PR) from 
video equipment.
(3)  S-VIDEO terminal  : Input S video signals from video equipment.   
(4)  VIDEO terminal  : Input video signals from video equipment.
(5)  AUDIO IN terminal  : Input audio signals.
(6)  CONTROL terminal 
       RS232C  :When operating the...

19

Preparations

Preparing and using the remote control
■  Operating the remote 
control
Point toward the projector’s 
infrared remote sensor, and press a 
button on the remote control.
•  Operating the projector from the front
Approx. 15 Approx. 5mApprox. 5m
■  Loading dry-cell batteries 
into the remote control
  Remove the battery cover.
  Insert the dry-cell batteries.
Be sure to align the plus and minus 
ends of the batteries properly.
Two batteries (R6, SIZE AA) are used.
  Replace the battery...

20

Placement
Placement Styles
As shown in the figures below, this device can be placed in 4 different styles.
The factory setting is “floor-mounted front projection.” Set the [
Projection mode] in the 
Default setting menu p.33, in accordance with your needs.
 WARNING•  Always obey the instructions listed in IMPORTANT SAFETY INSTRUCTIONS when placing the unit. Attempting to clean/replace the lamp at a high site by yourself may cause you to drop down, thus resulting in injury.
•  If you wish to mount the...