Toshiba Projector Tdp S35 User Manual

21
20
Preparations
MONITORCOMPUTER 2 INY/PB/PR
()
AUDIO OUTA UDIO IN
CONTROL
S-VIDEOVIDEO
COMPUTER 1 INY/PB/PR
(
)
R
L
p.47
Before connection•Read the owner’s manual of the device you are connecting to the projector.
• Some types of computer cannot be used or connected to this projector.
Check for an RGB output terminal, supported signal 
p.45
, etc.
•T urn off the power of both devices before connecting.
• The figure below is a sample connection. This does not mean that all of these devices
can or must...

23
Operations
22
■ Connecting the power cord1
Insert the power cord connector into the
AC IN socket of the projector.
2
Insert the power cord plug into a wall or
other power outlet.
■ Turning the power on1
Turn on the main power switchThe ON indicator will change to
orange, indicating standby mode.
2
Press the ON/STANDBY
button.The power turns on, and the following
3 green indicators light: ON, LAMP,
and FAN. After a moment, the start-up
screen appears.
Start-up screen
Control panel Remote
Control
Notes...

25
Operations
24
1
Turn on the power.Turn on the power by following the instructions in “Turning on the power” 
p.22
.
2
 Select the language and the lamp power (When using the
first time).When the projector is used for the first time after purchase, menu for language and
lamp power selection and configuration is displayed in English. (If the screen is out of
focus, adjust it according to the step 
6.)
qUse the 
 or 
 button to select the
desired language and press the 
 button.
Message for setup...

27
Operations
26
■Using auto setting
This function sets up the projector to the optimum state for
each type of the input signal by using simple operations.1
Press the SET UP button.The Set up menu appears.
2
Press the SET UP button again.The menu item is automatically adjusted/set.
For computer input, the 
 icon will appear during
processing.
For manual adjustment and setting, see the following table 
p.27
.
Notes•The image may not be projected or auto adjustment/setting may not be performed
correctly...

29
Operations
28
Using handy features (Continued)■Cutting off the picture and sound temporarily (Mute)
When you want to project the images of another projector, overhead
projector, etc. temporarily, this projector’s images and sound can be
turned off.
Press the remote control’s MUTE button.The picture and sound are cut off. (The Mute function is released
when pressing the MUTE button again.)Notes•The 
 icon will appear while mute is in effect.
•Operating any other functions will also cancel the muting....

31
Operations
30
■The image adjustment menuUse this menu to adjust image-related items.Items that can be adjusted are marked with  “Yes”, and those that cannot are marked with “No”.
Item    
  
Description
Computer
Y/P
B/PR
Video
CameraS-video
 
ContrastAdjust the image contrast. Yes Yes Yes Yes
Lower
Higher
BrightnessAdjust the brightness of the image. Yes Yes Yes Yes
Darker
Brighter
ColorAdjust the color of the image. No Yes Yes No
Lighter
Deeper
Tint 
*1
Adjust the tint of the image color. No No Yes...

33
Operations
32
Using the menu (Continued)
■Displaying Information (Status display)
This displays information about the input signal, lamp use time, etc.
“Yes”: displayed, “No”: not displayed
Item Description
Computer Y/P
B/PR
Video
CameraS-video
Input Input source name Yes Yes Yes YesMode name RGB input mode 
[Note 1]
Ye s N o N o N o
H-resolution Horizontal resolution (in dots) Yes No No NoV-resolution Vertical resolution (in dots) Yes No No NoH-frequency Horizontal sync frequency Yes No No...

35
Operations
34
Using the document cameraPlease read this chapter if the model you purchased is TDP-SC35 which includes a
document camera.■How to use the document camera
Using the camera attached on the projector
PRECAUTIONS
•F or camera interconnection, be sure to use the supplied RGB cable (25 cm or 3 m). If you
use the other cables, the normal operation may not be achieved and even the malfunction
may result.
• When moving the projector with the camera attached, do not grab the camera arm and/or
the...

37
Operations
36
■Image projection with the document camera1
Place the document.Set the document at the side of the projector
.
2
Press the CAMERA button, and select camera input.•The input returns to the previous input when the CAMERA button
is pressed again.
•Camera input can also be selected by pressing either the remote control or projector’s
INPUT button.3
Rotate the camera head to align the orientation of the document for
shooting by checking the screen.
4
Move the camera arm up and down to adjust...

39
Maintenance
38
1
Unplug power cord.
2
Wait until lamp is sufficiently cooled.Wait for at least 1 hour.
3
Remove the lamp cover.Loosen the 2 screws, then pull up to the
direction of the arrow with your fingers as
shown to remove the lamp cover. Use care to
av oid any damage to nails and/or tip of your
finger(s). If you have any difficulty in removal,
y ou can use a screwdriver or any other smaller
tool for your convenience.
4
Pull out the lamp.Loosen the 2 screws holding the lamp in place,
and pull up...