Toshiba Projector Tdp S2 Quickstart Manual

							Present!
TDP-S2/T1 Quick Start
Adjust the image position.
Power
Height adjustment ZoomFocus
Power
cord
Power cord
Laptop power
cord If necessary, press the activation
keys on your laptop to see the
image on the screen.*
* Your computer may use a different key combination. Check your computer ’s user ’s guide for more information.
Fn
3
65
4
12
Remove lens cap
M1-DA analog
computer cable
USB
mouse
in
in
Power
button
Signal from computer
connector panelS
S-video from video player
Sound from computer or video player
Composite video from video player
Signal from PR Cable
in
in
F5LCD/CRT
*
Power
009-0523-00 Look for additonal information, including troubleshooting and contact information, on the reverse side.
  
						

							Still need help?
Remember, your User’s Guide includes comprehensive instructions on setting up and 
operating your projector.
1 Nothing appears on the screen.
Make sure you have plugged in the power cable, removed the lens cap, and 
pressed the Power button on the side of the projector.
2All I see is the startup screen.
Make sure the computer cable is connected between the computer and the projec-
tor. Try pressing the laptop activation keys once more. Sometimes you need to 
press them twice to make the image appear on the screen. If you also have a video 
player plugged into the projector, try pressing the Source button on the keypad or 
the Computer button on the remote.
3There’s no computer image on the screen, just the message, Perfecting the 
Image, in the lower right corner.
The projector may be having a hard time synchronizing with the computer signal. 
Try pressing the Menu button on the projector keypad or remote. On the Image 
menu, turn Auto Image to Off. See the User’s Guide for help with the menus.
4The computer image fills the screen, but the text is fuzzy and hard to read.
Try setting your laptop’s resolution to the projector’s native resolution (Start/Set-
tings/Control Panel/Display/Settings tab, select 800x600 for the TDP-S2, 
1024x768 for the TDP-T1). If your laptop only goes up to 800x600 or 640x480, turn 
off Auto Resize on the Image menu in the projector. The image will be smaller, but 
it should be sharp. See the User’s Guide for help with the menus.
5I can only see part of the computer image on the screen.
Try setting your laptop’s resolution to the projector’s native resolution. With some 
laptop computers, it’s necessary to disable the laptop display to do this. You use 
the activation keys to show the image only on the screen.
6How do I play a video through the projector?  
Need to talk to someone?
Contact your Toshiba dealer or Toshiba Technical Support.SAFETY INSTRUCTIONS
 
Please read and follow all safety instructions provided in this quick start and your User’s Guide 
BEFORE using your projector. Failure to comply with safety instructions may result in fire, electri-
cal shock, or personal injury and may damage or impair protection provided by equipment. Please 
save all safety instructions.
Safety Definitions
Wa r n i n g
: Statements identify conditions or practices that could result in permanent per-
sonal injury.
Caution
: Statements identify conditions or practices that could result in damage to your 
equipment.
 
Safety Symbols
Attention
: For information about usage of a feature, please refer to the User’s Guide.
Wa r n i n g
: Hot surface. Do not touch.
An arrow pointing to lamp door of the projector.
Safety Terms:
Wa r n i n g
: Don’t look directly into the lens when the projector is turned on.
Wa r n i n g :
 To replace the lamp, unplug the power cord. To avoid burns, wait 30 
minutes before opening the lamp door. Follow all instructions provided in the 
User’s Guide.
Wa r n i n g :  Please use the power cord provided. Connect the power cord to a recep-
tacle with a protective safety (earth) ground terminal.
Wa r n i n g :  Refer all service to qualified service personnel. Servicing your own projector will 
void the warranty. 
Caution
: Don’t block ventilation openings.
Caution:
 Don’t set liquids on the projector. Spilled liquids may damage your projector.
Caution: Don’t place the projector on a hot surface or in direct sunlight.
Caution: Do not drop the projector. Transport the projector in a Toshiba-approved case; con-
tact your Toshiba dealer for a list of cases.
in
in
Video Audio Out
LR
Audio cable Video cable
audio
adapter