Toshiba Projector Tdp P3 Quickstart Manual

							in
in
Present!
TDP-P3 Quick Start
Adjust the image position.
Power
The fans start. The Lamp LED on
the keypad lights orange then green
when the software has initialized.
Elevator ZoomFocus
Signal from computer
S-video from video player Power
cord
TDP-P3 connector panel
Power cord
lamp on/off
Computer
power cord If necessary, press the activation
keys on your computer to see the
image on the screen.*
* Your computer may use a different key combination. Check your computer ’s user ’s guide for more information.
Lens cap
Fn
F5LCD/CRT
3
65
4
12
M1-DA analog
computer cable
USB
mouse
S
Sound from computer or video player
Composite video from video player
in
in
*
009-0509-00 
						

							Still need help?
Remember, your TDP-P3 User’s Guide includes comprehensive instructions on setting 
up and operating your projector.
1 Nothing appears on the screen.
Make sure you have plugged in the power cable, removed the lens cap, and 
pressed the Lamp On/Off button on the keypad.
2All I see is the startup screen.
Make sure the computer cable is connected between the computer and the projec-
tor. Try pressing the computer activation keys once more. Sometimes you need to 
press them twice to make the image appear on the screen. If you also have a video 
player plugged into the projector, try pressing the Source button on the keypad or 
the Computer button on the remote.
3There’s no computer image on the screen, just the message, Perfecting the 
Image, in the lower right corner.
The projector may be having a hard time synchronizing with the computer signal. 
Try pressing the Menu button on the projector keypad or remote. On the Image 
menu, turn Auto Image to Off. See the user’s guide for help with the menus.
4The computer image fills the screen, but the text is fuzzy and hard to read.
Try setting your computer resolution to 1,024 x 768 (Start/Settings/Control 
Panel/Display/Settings tab). If your computer only goes up to 800 x 600 or 640 x 
480, turn off Auto Resize on the Image menu in the projector. The image will be 
smaller, but it should be sharp. See the user’s guide for help with the menus.
5I can only see part of the computer image on the screen.
Try setting your computer resolution to 1,024 x 768. With some computers, it’s nec-
essary to disable the computer’s display to do this. You use the activation keys to 
show the image only on the screen.
6How do I play a video through the projector?
 
Need to talk to someone?
Contact Toshiba Technical Support.
⇒In North America, call Toshiba’s toll-free customer service & technical support at 
800-457-7777 (available 24 hours a day, 7 days a week). 
⇒For web-based or other electronic technical support, please visit Toshiba at 
 support.toshiba.com. SAFETY INSTRUCTIONS
 Please read and follow all safety instructions provided in this quick start and your 
User’s Guide BEFORE using your projector. Failure to comply with safety instructions 
may result in fire, electrical shock, or personal injury and may damage or impair pro-
tection provided by equipment. Please save all safety instructions.
Safety Definitions
Wa r n i n g
: Statements identify conditions or practices that could result in perma-
nent personal injury.
Caution
: Statements identify conditions or practices that could result in damage 
to your equipment. 
Safety Symbols
Attention
: For information about usage of a feature, please refer to the User’s 
Guide.Wa r n i n g
: Hot surface. Do not touch.
  An arrow pointing to lamp door of the projector.
Safety Terms:
Wa r n i n g
: Don’t look directly into the lens when the projector lamp is turned on.
Wa r n i n g :
 To replace the lamp, unplug the power cord. To avoid burns, 
wait 30 minutes before opening the lamp door. Follow all instructions 
provided in the User’s Guide.
Wa r n i n g :  Please use the power cord provided. Connect the power cord 
to a receptacle with a protective safety (earth) ground terminal.
Wa r n i n g :  Refer all service to qualified service personnel. Servicing your own 
projector will void the 
warranty. 
Caution
: Don’t block ventilation openings.
Caution:
 Don’t set liquids on the projector. Spilled liquids may damage your 
projector.
Caution: Don’t place the projector on a hot surface or in direct sunlight.
Caution: Do not drop the projector. Transport the projector in an Toshiba-
approved case; see the User’s Guide for a list of cases.
in
in
Video Audio Out
LR
Audio cable Video cable
audio
adapter