Toshiba Projector Tdp Ex20 User Manual

Before Using
Preparations
Operations
Maintenance
Others
TDP-EX20
DATA PROJECTOR
OWNER’S MANUAL 

23
Before Using
SAFETY PRECAUTIONS
The lightning flash with arrowhead symbol, within an equilateral triangle, is 
intended to alert the user to the presence of uninsulated "dangerous voltage" 
within the product's enclosure that may be of sufficient magnitude to constitute a 
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to 
the presence of important operating and maintenance (servicing) instructions in 
the literature...

45
Before Using
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS OWNER'S MANUAL AND THOSE 
MARKED ON THE UNIT.  RETAIN THIS BOOKLET FOR FUTURE 
REFERENCE.
This unit is fully transistorized and does not contain any parts that can be repaired by the 
user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO 
DANGEROUS VOLTAGE.  REFER SERVICING TO QUALIFIED SERVICE 
PERSONNEL ONLY.
1.  Read Owner’s Manual
After unpacking this product, read...

67
Before Using
IMPORTANT SAFETY INSTRUCTIONS (Continued)
11.  Lightning storms
For added protection for this 
product during storm, or when it 
is left unattended and unused for 
long periods of time, unplug it from 
the wall outlet.  This will prevent 
damage to the product due to 
lightning and power-line surges.
However, while it is thundering 
or lightning, do not touch the 
apparatus and any connected 
cable and/or equipment.
This will prevent you from receiving 
the electric shock by an electric...

89
Before Using
IMPORTANT SAFETY INSTRUCTIONS (Continued)
20.  If glass components, including lens and lamp, 
should break, contact your 
dealer for repair service.
This product incorporates glass 
components, including a lens and 
a lamp.  If such parts should break, 
please handle with care to avoid 
injury and contact your dealer for 
repair service.  The broken pieces 
of glass may cause to injury.  In 
the unlikely event of the lamp 
rupturing, thoroughly clean the 
area around the projector and...

1011
Before Using
POWER SUPPLY INFORMATION
If your line voltage is 220 to 240V, use one of the following types of cable/plug.
Plug
configurationPlug type
Australian
240V
10A
North American240V
15A Switzerland
240V
6A
Line voltage
EURO
UK 220 – 240V
220 – 240V 200 – 240V
200 – 240V 200 – 240V
Plug
configuration
Plug type Line voltage
Use a 5A fuse which is approved by ASTA 
or BSI to BSI362.
Always replace the fuse cover after 
changing the fuse.
IMPORTANT PRECAUTIONS
Moisture Condensation
Never operate...

1213
Before Using
OTHER INFORMATIONREMOTE CONTROL BATTERIES
Copyrights
Showing or transmitting commercial imaging software or broadcast or cable-broad casting 
programs with the purpose of other than the personal and private viewing, including 
modifying images using the freeze or resize functions, or displaying with the varying 
aspect ratio of the images, could violate the direct or indirect copyrights of the imaging 
software or broadcast program, etc., if done without first consulting with the...

1415
Before Using
CONTENTS
Before Using
SAFETY PRECAUTIONS ........................................................................\
.......   2
IMPORTANT SAFETY INSTRUCTIONS .........................................................   4
POWER SUPPLY INFORMATION ..................................................................   10
IMPORTANT PRECAUTIONS ........................................................................\
.   10
EXEMPTION CLAUSES...

1617
Preparations
Checking the package contents
Preparations
Names of each part on the main unit
(1) (2) (3) (4)(5) (6)(7)
(8) (9) (10) (11) (12) (13) (14)(15) (16)(17)(14)
Back Front
Name: Function
(1) Air exhaust : Expels air that has grown hot inside the projector.
(2) Lamp cover :
Remove to replace lamp. 
p.86
(3) Control panel :
Operates the projector. p.18
(4) Focusing lever : Adjusts screen focus.
(5) Lens : Projects expanded image.
(6) Lens cover :
Slide shut when not using the projector to...

1819
Preparations
Names of each part on the control panel and remote control
(12)
(4)
(5)
(3)
(22)
(24)
(1) (11)
(25)
(13)
(14)
(2)
(6)
(17)
(21)
(18)
(7)
(8)
(16)
(15)
(23)
(9)
(10)
(19)
(20)
Remote control transmitter Laser light source
Battery 
cover
Warning 
label
Remote ControlControl panel
 CAUTION
Do not look into the laser light 
source of the remote control 
or direct the laser pointer 
toward a person or a mirror.
Handling and adjusting other 
than described here may 
lead to dangerous exposure...