Toshiba Projector Tdp Ew25 User Manual

2021
Preparations
Names of the terminals on the rear panel
(14)(13)
(12)(11)
(8) (7)
(4)(3) (6)(5)
(2)(1)
(9)(10)
Name : Main Function
(1) LAN terminal : Connects a network cable.
(2) USB terminal :
Connects a commercial USB memory. 
p.48
(3)COMPUTER 2 IN terminal:Input RGB signal from a computer or other source, or a 
component video signal (Y/P
B/PR) from video equipment.
(4) AUDIO IN terminal : Input audio signals from a computer, or from video 
equipment with a component video signal output...

2223
Preparations
Operating a computer using the remote control
A computer can be operated using the projector’s remote control.  This function is available on 
any computer with the Windows® 98/98SE, Windows® Me, Windows® 2000, Windows® XP, or 
Windows Vista™ OS, that is equipped with a USB port which can support USB1.1 (The mouse 
remote control receiver is also supported on OS 9 or OS X for the Macintosh).  However, 
please note that Toshiba does not guarantee the operation of all computers.
1...

2425
Preparations
Connection
Before connection
Read the owner’s manual of the device you are connecting to the projector.
Some types of computer cannot be used or connected to this projector.
Check for an RGB output terminal, supported signal 
p.94, etc.
Turn off the power of both devices before connecting.
The figure is a sample connection. This does not mean that all of these devices can or 
must be connected simultaneously. (Dotted lines mean items can be exchanged.)
p.96
•
•
•
•
 Notes
The COMPUTER 1...

2627
Operations
Connecting the power cord
1  Insert the power cord connector into the AC IN socket of the 
projector.
2  Insert the power cord plug into a wall or other power outlet.
Turning the power on
1  Open the lens cover.
Slide the lens cover to open. If it is left closed, the power will not be turned on.
2  Turn on the main power switch.
The ON/STANDBY indicator will change to orange, 
indicating standby mode.
3  Press the ON/STANDBY button.
The power is turned on, and the ON/STANDBY 
indicator...

2829
Operations
Basic operations
1  Turn on the power.
Turn on the power by following the instructions in “Turning the power on” p.26.
2  Select the language and the lamp power (When using the first time).
When the projector is used for the first time after purchase, the start menu for language 
(to display the menus and messages on the screen) and lamp power selection and 
configuration is displayed in English. (If the screen is out of focus, adjust it according to 
the step 
6.)
1 Use the , ,  or  button...

3031
Operations
 Notes
Note that lamp characteristics may rarely cause the brightness to fluctuate slightly.
A lamp is consumable item. If used for extended periods, images will appear dark, and 
the lamp could burn out.  This is characteristic of a lamp, and is not malfunction. (The 
lifetime of the lamp depends on conditions of use.)
The DLP® chip is made using extremely advanced technology, but there may be black 
spots (pixels that do not light) or bright spots (pixels that are constantly lit) on the...

3233
Operations
Resizing image
The projected image can be resized (zoomed in/out).
1  Press the remote control’s RESIZE  button.
Each time you press the RESIZE  button, zoom ratio is up. You can keep 
pressing.
2  To zoom out, press the remote control’s RESIZE 
 button.
Each time you press the RESIZE  button, zoom ratio is 
down. You can keep pressing.
(However, the image cannot be smaller than the original 
size.)
3  To move the area to zoom in, use the     
buttons.
You can keep pressing.
4  When the...

3435
Operations
Using handy features (Continued)
Cutting off the picture and sound temporarily (Mute)
When you want to project the images of another projector, overhead 
projector, etc. temporarily, this projector’s images and sound can be 
turned off.
  Press the remote control’s MUTE button.
The picture and sound are cut off. (The Mute function is released 
when pressing the MUTE button again.)
 Notes
The  icon will appear while mute is in effect.
Operating any other functions will also cancel the...

3637
Operations
  How to set password (from [Off] to [On])
1  Select [Password] in the Default setting 2 menu and press the  or  
button.
2  Select [Password setting] in the password registration, setting menu, 
and press the 
 or  button.
3 Select [On].
4  Select [OK] and press the  button.
The password entry screen is displayed.
5  Enter the password using numeric keys of the remote control.
6  The password setting will be set as [On].
  How to operate when password is [On]
1  Turn on the power.
2  The...

3839
Operations
The image adjustment menu
Use this menu to set or adjust image-related items. Items that can be set or adjusted 
are marked with “Yes”, and those that cannot are marked with “No”. (When an item is 
masked, it indicates that you cannot select for the current input.)
Item  DescriptionComputerY/PB/PRVideoS-videoNetworkUSB 
memory
ContrastAdjust the image contrast.
 Lower 
 HigherYe s Ye s Ye s Ye s Ye s Ye s
BrightnessAdjust the brightness of the image.
 Darker 
 BrighterYe s Ye s Ye s Ye s...