Toshiba Projector Tdp D1 User Manual

21
Operations
20
1
Turn on the power.Turn on the power, following the instructions in “Turning on the power” 
p.19
.
2
 Select language (When using for first time).When the projector is used for the first time after purchase, a message is displayed on
the screen, and the language menu appears. The default language is English.
(If the screen focus is not on the menu, adjust according to step 
6.)
qUse the 
 
 buttons to select the desired
language, and press the 
 button.
A message displays the selected...

23
Operations
22
Using auto setting (Auto setting)
This function sets up the projector to the optimum state for
each type of the input signal by using simple operations.1
Press the AUTO SET button.The Auto setting menu appears.
2
Press the AUTO SET button again.The menu item is automatically adjusted/set.
For computer input, the 
 icon will appear during
processing.
Note•Auto adjustment/setting may not be performed correctly for input signals other than
those supported by the projector 
p.36
, p.37
....

25
Operations
24
Freezing the image (Freeze)
The image being projected can be made to be frozen. This function is to
be used to pause a video during a presentation, etc.
Press the remote control’s FREEZE button.The picture is paused. The Freeze function is released when
pressing the FREEZE button again.Notes•The 
 icon will appear while freeze is in effect.
•The freeze function can be used on the resize function. Other
operations will release the freeze.
•Even if an image is frozen on the projector, it...

27
Operations
26
You can call up on-screen menus, and conduct a number of adjustments and settings,
using the operation buttons 
p.14
 on the control panel (main unit side) and remote control.
How to use the menus
The menu shown below is only for operation instructions and might be different from
the actual display.
Using the menus
Note•Menu adjustments and settings are saved when the power is turned off via the ON/
STANDBY button. If the main power switch is turned off before this, or the power goes...

28
29
Operations
The image adjustment menuUse this menu to adjust image-related items.
Items Items that can be adjusted are marked with  “Ye s”, and those that cannot are marked
with “No”.
Item    
  
Description
Computer
Y/P
B/PR
Video S-video
 
ContrastLower
Higher Yes Yes Yes Yes
BrightnessDarker
Brighter Yes Yes Yes Yes
ColorLighter
Deeper No Yes Yes Yes
Tint 
[Note 1]
Reddish
Greenish No No Yes Yes
SharpnessSofter
Sharper No Yes Yes Yes
R-levelLess red
More red Yes Yes Yes Yes
G-level
Less green...

31
Maintenance
30
Lens cleaning•Clean the lens with a commercially available blower and/or
lens cleaner.
•The lens is easily scratched, so do not rub it with hard objects,
or strike it.Main unit cleaning•Clean the main unit after unplugging the power cord.
•Wipe dirt off the main unit gently with a soft cloth.
•If the soiling is severe, dip the cloth in a neutral
detergent diluted in water, wring well, and gently wipe
off the dirt, then finish up by wiping with a dry cloth.Replacing cooling fans
To...

33
Others
32
The indicator lights inform you of internal abnormalities.
No power⇒Problem with projector
•Unplug the power cord, and contact your dealer.
⇒The lamp cover is not properly attached.
•Unplug the power cord, and reattach the lamp cover. 
p.32
Lamp went out during use, or won’t come on⇒The abnormal indication of the LED continues for about 1 minute
then the projector returns to standby mode after cooling for a
while.  If the projector fails to operate normally after turning the
power back on,...

35
Others
34
SpecificationsList of general specifications
Item Specification
Consumption Power 340 WWeight 2.4 kg
External Dimensions 248 × 90 × 201 mm (W × H × D)(including protruding parts)Cabinet material Magnesium alloy, Aluminum alloyConditions for usage
 environment
Temp: 0°C to 35°C; relative humidity: 30% to 70%
Display system DLP
TM (1-tip DMD
TM)
Native resolution 1,024H × 768V  XGALens Zoom lens F=2.4-2.6 f=24.19-30.65 mmLamp High-pressure mercury lampProjection screen size 37 - 180...

37
Others
36
Specifications (Continued)
List of supported signals (Y/P
B/P
R signals)
Signal format fh(kHz) fv(Hz)
480i(525i)@60Hz15.73 59.94
480p(525p)@60Hz31.47 59.94
576i(625i)@50Hz15.63 50.00
576p(625p)@50Hz31.25 50.00
720p(750p)@60Hz45.00 60.00
720p(750p)@50Hz37.50 50.00
1080i(1125i)@60Hz33.75 60.00
1080i(1125i)@50Hz28.13 50.00
1035i(1125i)@60Hz33.75 60.00
1152i(1250i)@50Hz31.25 50.00
List of supported signals (Video, S-Video signals)
Video mode fh(kHz) fv(Hz) fsc(MHz)
NTSC 15.73 60 3.58
PAL 15.63...

38

CONTROL terminal
Pin assignment
78 6 34
5 12
Signal Name
RXD
CTS
DSR
GND
RTS
N.C
TXD
N.C Pin No.
1
2
3
4
5
6
7
8Description
Receiving data
Consent to send
Data set ready
Signal ground
Request to send
No connection
Sending data
No connection
Mini DIN 8 pin connector
Interface format
1 Communication method RS-232C, 9600bps, No Parity, Data Length: 8 bits;
Stop Bit Length:  1 bit
2 Communication format STX (02h)  Command (3Byte)  ETX (03h)
Only 1 command valid per communication.
3 Data format For...