Toshiba Portege 2000 Maintenance Manual

TOSHIBA
Tough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATIONP2000 Series  PortegeGENERAL INFORMATIONTMBefore attempting any of the following procedures,
make sure that the main battery and AC adaptor is
not connected to the unit and the environment in
which you are working on is protected from 
Electro-Static discharge(ESD).
TOSHIBA
Tough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATIONP2000 Series  PortegeGENERAL INFORMATIONTMBefore attempting any of the following...

FIELD REPLACEABLE UNIT DOCUMENTATION
TOSHIBA
Tough Enough for Today’s World.         TABLE OF CONTENTS:
  1. BATTERY PACK REMOVAL
  2. OPTIONAL PC CARD REMOVAL
  3. MEMORY MODULE REMOVAL
  4. HDD REMOVAL 
  5. KEYBOARD REMOVAL
  6. TOP COVER REMOVAL
  7. MINI PCI CARD REMOVAL
  8. RTC REMOVAL
  9. SPEAKER REMOVAL
10. MODEM BOARD REMOVAL
11. SOUND JACK BOARD REMOVAL
12. SYSTEM BOARD REMOVAL
13. TOUCH PAD REMOVAL
14. DISPLAY MASK REMOVAL
15. FL INVERTER AND LCD REMOVALP2000 Series  PortegeTM 

OPTIONAL PC CARD REMOVALBATTERY PACK REMOVAL1.  Turn the computer upside down as shown.
2.  Slide the battery release lever to the left to release
     the battery.  3.  Lift out the battery.FIELD REPLACEABLE UNIT DOCUMENTATIONP2000 Series  PortegeTMMEMORY MEMORY REMOVAL1. Turn the computer upside down. 
2. Remove two M2x2.5 black screws securing the memory
    cover.
TOSHIBA
Tough Enough for Today’s World.Battery PackBattery 
releaseleverPC cardEject button1. Press the eject button of the PCCard you...

3. Lift up the rubber handle and hold the HDD assembly
    as shown above.4. Disconnect the HDD assembly from the 
    HDD connector.CAUTION:  Be very careful not to press on the TOP or
BOTTOM of the HDD. Pressure can destroydata or damage the drive.5. Remove the HDD rubber holder and the HDD pad.FIELD REPLACEABLE UNIT DOCUMENTATION  PortegeTM
TOSHIBA
Tough Enough for Today’s World.P2000 SeriesHDD REMOVALHDD REMOVAL1. Turn the computer upside down.
2. Remove two M2x4 black screws securing the 
    HDD...

KEYBOARD REMOVALKEYBOARD REMOVAL3. Unlatch the keyboard holder at the top of the keyboard.FIELD REPLACEABLE UNIT DOCUMENTATION  PortegeTM
TOSHIBA
Tough Enough for Today’s World.P2000 SeriesKeyboard
holderLatch4. Remove two M2x3 silver flat head screws securing
    the keyboard.5. Lift up the keyboard and lay it on the palm rest.
6. Disconnect the keyboard cable from PJ445 and lift out 
    the keyboard.Keyboard cableKeyboardPJ445M2x3 silver flat head screwsTOP COVER REMOVAL1. Turn the computer upside...

TOP COVER REMOVAL3. Turn the computer right side up and open the display.
4. Disconnect the following cables by carefully lifting the lever    using   from the PCB:    - Touch Pad cable from PJ334 
    - Flexible PWB from PJ9    - Internet/ In-Touch Buttons cable from PJ8    - Power Button/ LED board cable from PJ75. Remove six M2x4 brass screws securing the top 
    cover.6. Separate the top cover from the bottom cover.Touch Pad cablePJ334PJ9Flexible
PWBInternet/In
Touch buttons
cablePJ8Power button/...

MODEM BOARD REMOVALRTC REMOVALSPEAKER REMOVAL1. Disconnect the modem harness from the modem board.
2. Remove two M2x4 brass screws securing the modem
    board to the HDD/Modem interface board.3. Disconnect the modem board from PJ3 on the 
    HDD/modem board1. Peel off  two strips of glass tape securing the RTC cable.
2. Disconnect the RTC harness from PJ790 and lift it out.1. Disconnect the speaker harness from PJ10 on 
    the system board.
2. Lift out the speaker and separate the rubber
    holder....

SYSTEM BOARD  REMOVAL4. Remove two M2x4 flat head brass screws securing 
    the system board.5. Remove two M2x4 brass screws securing the 
    PC card slots.6. Lift out the system board.7. Disconnect the PC card slots from PJ11 on the system 
    board.8. Disconnect the HDD/modem interface cable from PJ3
    on the system board.9. Remove two cool sheets on the top side of the system    board.SYSTEM BOARD  REMOVAL1. Peel off the glass tapes securing the modem
    harness and the LAN harness.2. Disconnect...

TOUCH PAD REMOVAL1. Carefully peel off the copper tape.
2. Remove four M2x3 silver flat head screws securing
    the Touch pad assembly.
3. Lift out the touch pad assembly.
4. Separate the touch pad board from the touch pad
    bracket.FIELD REPLACEABLE UNIT DOCUMENTATION  PortegeTM
TOSHIBA
Tough Enough for Today’s World.P2000 SeriesM2x3 silver flat head screwscopper tapeTouch pad boardTouch pad bracket1. Remove the RTC/Speaker holder.
2. Remove one M2x4brass screw securing the LCD
    latch assembly and...

DISPLAY MASK REMOVAL1. Remove one LCD cushions and six LCD mask seals
    using a pair of fine-tipped tweezers.2. Remove one M2x3 black flat head screw and
    six M2x3 silver flat head screws securing the display
    mask.3. Lift out the display mask.1. Remove one M2x3 silver flat head screw securing
    the FL inverter board.2. Lift up the FL inverter board and disconnect the
    FL cable from CN2 and the FL inverter cable 
    from CN1. 
3. Carefully rotate out the top of the LCD module    enough to...