Toshiba Libretto 50CT/70CT Manual

3.22  Floppy Disk Drive Utilities3 Tests and Diagnostics3-46Libretto 50CT/70CT Maintenance ManualDIAGNOSTICS - FLOPPY DISK FORMAT : VX.XX
Drive number select (1:A, 2:B) ?
(b) Select a drive number to display the following message:
Type select (0:2DD,3:2HD) ?
(c) Select a media/drive type number and press Enter.  A message similar to the
one below displays:
Warning : Disk data will be destroyed.
Insert work disk into drive A:
Press any key when ready.
(d) Remove the diagnostics disk from the FDD, insert...

3 Tests and Diagnostics3.22  Floppy Disk Drive UtilitiesLibretto 50CT/70CT Maintenance Manual3-47(c) Remove the diagnostics disk from the FDD, insert the source disk, and press
any key.  The following message displays, indicating the program has started.
[ FDD TYPE ] : TRACK  = XXX
[ FDD TYPE ] : HEAD   = X
[ FDD TYPE ] : SECTOR = XX
Copy start
[[ track,head  =  XXX X ]]
(d) Remove the source disk from the FDD, insert a formatted work disk, and press
any key.  The [[ track, head  =  XXX X ]] message...

3.22  Floppy Disk Drive Utilities3 Tests and Diagnostics3-48Libretto 50CT/70CT Maintenance Manual(d) Insert a source disk, press any key, and the following message displays:
Insert source disk into drive A:
Press any key when ready.
(e) Insert a source disk, press any key, and the following message displays:
— Max. address —
[Track ] = xxx
[ Head ] = xx
[Sector] = xx
Track  number ??
(f) Set the track number you want to dump.  The system will access the disk and
dump a list. 

3  Tests and Diagnostics3.23  System ConfigurationLibretto 50CT/70CT Maintenance Manual3-493 
3.23 System Configuration
3.23.1 Function Description
The System Configuration program contains the following configuration information for the
computer:
1. BIOS ROM version
2. Boot ROM version
3. KBC version
4. PS microprocessor version
5. System memory size
6. Number of floppy disk drives
7. Number of ASYNC ports
8. Number of hard disk drives
9. Number of printer ports
10. Extended memory size
11. Number of...

3.24  SETUP3  Tests and Diagnostics3-50Libretto 50CT/70CT Maintenance Manual3.24 SETUP
3.24.1 Function Description
This program displays the current system setup information as listed below:
1. Memory
(a) Total
(b) Base
(c) Extended
(d) Shadow BIOS ROM
2. Display
(a) Display Adapter
(b) LCD Display Colors
(c) Power On Display
(d) VGA Segment Address
(e) Text Mode Stretch
3. Hard Disk
4. Password
5. I/O Ports
(a) Serial Port
(b) Infared Port
(c) Parallel Port
(d) Sound System
6. Others
(a) Power-up Mode...

3  Tests and Diagnostics3.24  SETUPLibretto 50CT/70CT Maintenance Manual3-513.24.2 Accessing the SETUP ProgramSelect 0 from the Diagnostics Menu and press Enter to display the TSETUP screen.­¯®¬ ­¯®¬
 :  Select items  Space, BkSp : Change values
Esc: Exit without saving  Home: Set default values  End: Save changes and ExitNOTE: The Panel Power On/Off and System Auto Off items appear only when thecomputer is in Hibernation mode. 

3.24  SETUP3  Tests and Diagnostics3-52Libretto 50CT/70CT Maintenance Manual3.24.3 Moving Within the SETUP Menu and Changing Values
1. Press ¬ ¬ and ® ® to move between the two columns.  Press ­ ­ and ¯  ¯ to move between
items in a column.
2. Press either the space bar or BkSp to change the value.
NOTES:  1.On either page, you can go directly to a specific group by pressing the first letter (highlighted) of the group’s name. For example, B,to go to the Battery group.2.To change pages, press the PgUp...

3  Tests and Diagnostics3.24  SETUPLibretto 50CT/70CT Maintenance Manual3-53NOTE:  When you execute the default setting, the following settings are notchanged:HDD ModePasswordSound SystemWrite Policy (CPU Cache)3.24.6 SETUP Options
The SETUP screen is divided into functionally related groups.  This section describes each
group and its options.
1. Memory
These options configure the computer’s memory. You cannot change these values.
(a) Total
Displays the total amount of memory installed and is...

3.24  SETUP3  Tests and Diagnostics3-54Libretto 50CT/70CT Maintenance Manual(b) LCD Display Colors
Used to select the color palette of the TFT display when the LCD mode is set
to Color.
222K(Default), 4096 and 16M(256k) colors
(c) Power On Display
Used to select the display when booting up.
Internal/ExternalSelects an external CRT if one is connected,
otherwise it selects the internal LCD. (Default)
SimultaneousSelects both the internal LCD and the external
CRT for simultaneous display.
NOTE:  When...

3  Tests and Diagnostics3.24  SETUPLibretto 50CT/70CT Maintenance Manual3-553. Hard Disk
Use this item to select the hard disk mode.
Enhanced IDE
(Normal)Select this mode when using Windows 95,
Windows for Workgroups, MS-DOS, or
OS/2. (Default)
Standard IDESelect this mode when using Novell NetWare or
UNIX.  When this mode is selected, up to
50MB is logically available even though the disk
capacity is larger than 504MB.
Not usedHDD is not used.
To see the capacity of the hard disk, use the CHKDSK...