Toshiba Dvr5su Owners Manual

41ENEN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
Checking, canceling, or correcting the timer
programming information
If the timer program did not complete correctly, the 
error number appears in the timer programming list.
1) Press [TIMER SET].
2) Press [TIMER PROG.].
3) Check the information on the list you want to edit.
Timer Programming
1/1 THU JAN/06 10:00AM SP  (1:00) JAN/  6/11  1:00 AM L1 SP
   Date  Start  End  L1/L2...

42ENEN
 TIMER  RECORDING
Hints for Timer Recording
This unit records the programs according to priority if the timer programmings are overlapped. The timer
programming set previously has priority.A timer recording of lower priority will be canceled or start from the middle.
Check the overlapped timer programmings and change the priority if necessary.
f there is a power failure or this unit has been 
unplugged for more than 30 seconds, the clock setting
and all timer programming will be lost.
a disc is...

43ENEN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
SATELLITE LINK
You can set the unit to start recording whenever it
detects the video signal from the external tuner.
Preparing for the satellite link timer recording:
Preparation on the tuner
  The external tuner should be equipped with some kind 
of timer function. Using timer function of the tuner, set
it to output audio/video signals when it comes to the 
time you want to start...

44ENEN
 SETTINGS FOR AN EXTERNAL DEVICE
Supplied cables used in this connection are as follows:


Please purchase the rest of the necessary cables at your local store.
Connect the external device properly to the unit by using input jacks either L2 (Front) or L1 (Rear).
When connecting an external device of monaural output to this unit, use AUDIO L jack of L2 (Front).
Use S-video or the RCA audio/video cables for this connection.
When connecting a DVC (digital video camcorder), it is recommended to...

45ENEN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
SETTINGS FOR AN EXTERNAL DEVICE
Recording from an External Device
1
Turn on the TV and press 
[I/yy ON/STANDBY], and be sure to
select the input o
f the TV to which
t
he unit is connected.
2
When you want to record to the disc:yy
Press [DVD].
Press [OPEN/CLOSEA] to open the disc 
tray. P
lace the disc to record properly.
Press [OPEN/CLOSEA] again to close
the disc tra
y.
It takes...

46ENEN
DV DUBBING
 Guide to DV and On-Screen Display
This function helps you to easily dub the contents of the DVC(digital video camcorder) to this unit.
You can control basic operations of the DVC from the remote control of this unit such as playback, fast forward or
reverse and stop all operations if the DVC is in video mode. Use the DV cable that has 4-pin input jack and is 
comp
liance with the IEEE1394 standards. When you connect to DV IN jack on the front of this unit, select
“L3 (DV-IN)” position...

47ENEN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
DV DUBBING
DVC to DVD Dubbing
Before recording from DVC, see page 44 for connectioninstructions.
2
Press [REC MODE] repeatedly to 
se
lect a recording mode.
(Refer to “Recording Mode” on page 34 for DVD or
“Recording” on page 93 for VCR.)
3
Press [DISPLAY].
4
With “Control” highlighted, press 
[ENTER] to displa
y the available
devices to control with the remote
control of this unit....

48ENEN
DV DUBBING
Note for DV dubbing
 If you press[PAUSEF]at step 5 in “DVC to DVD Dubbing” on page 47, the tape will rewind to the point a few seconds preceding the paused point. When you press[ENTER]at step 6 in “DVC to DVD Dubbing” on page 47, then, it will start dubbing when it comes to the paused point.
 The unit does not send out the output signal to DVC.
For the proper operation, connect DVC to the unit directly. Do not connect this unit and DVC via any other unit.
 Do not connect more than 1...

49ENEN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
 DVD/VCR  DUBBING
1
Press [SETUP] and use [K/ L] to 
select “General Settin
g”, then press
[ENTER].
“General Setting” menu will appear.
2
Use [K /L] to select “Recording”,
t
hen press [ENTER].
“Recording” menu will appear.
3
Use [K /L] to select “Dubbing
Mode”, then press [ENTER].
Selection menu will appear.
You can copy a DVD to a cassette tape or copy a cassette
tape to a DVD. This...

50ENEN
4
 Use [K /L] to select “VCRDVD”, 
t
hen press [ENTER].
Dubbing Mode
VCR       DVD
DVD       VCR
5
 Press [SETUP] to exit.
Press [VCR].
6
 Press [PLAYB]. Then press
[PAUSEF] at the point you wish to 
start recordin
g.
Since it takes about a few seconds before theactual dubbing begins, please allow extra 5
secon
ds when selecting the starting point.
7
Press [DVD], then press [REC MODE]
repeatedl
y to select the desired
recordin
g mode.
8
 Press [DUBBING].
VCR to DVD duplication will start.
9
 Press...