Toshiba Dr410 User Manual

							51 EN51 EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
Others
BASIC PLAYBACK
Using the Title/Disc Menu
DVD may contain a title list, which describes the contents 
of the disc, or a disc menu, which guides you through the 
available functions in the disc.
1) Press [TOP MENU] or [MENU/LIST] to call up the title 
list or disc menu.
2) Use  [K / L / { / B] to make a selection, and then 
press [ENTER] to enable your selection.
3) Press  [STOP C] to exit the disc menu.1) During playback, press [PAUSE F].
Playback will be paused and sound will be muted.
F
2) Press  [PLAY B] to return to the normal playback.
Note
•  You can select a numbered menu with [the Number 
buttons] also.
•  Menus vary among discs. Refer to the information 
accompanying the disc for details.
• [MENU/LIST] or [TOP MENU] will not always be 
effective for all DVDs.
Note
•  For DVD, set “Still Mode” to “Field” in “Playback” 
menu if pictures in the pause mode are blurred. 
(Refer to page 84.)
Pause
     
E7K7AUD_D-R410KU_EN.indd   51E7K7AUD_D-R410KU_EN.indd   512007/12/14   15:03:242007/12/14   15:03:24 
						

							52 EN52 EN
SPECIAL PLAYBACK
You can skip TV commercials to enjoy the recorded 
programs without interrupting.
During playback, press [INSTANT SKIP].
Normal playback will start at 30 seconds ahead from 
where you press [INSTANT SKIP].
Every time you press [INSTANT SKIP], the searching 
point will be extended by 30 seconds ahead.
You can press [INSTANT SKIP] up to 6 times (180 seconds).
e.g.) Press [INSTANT SKIP] once.
B
Instant Skip 30sec.
(forwarding 30 seconds)
Playback will return to the normal playback. You can play back from where you stopped playing back 
the disc last.
1) During playback, press [STOP C].
The resume message will appear.
Resume ON
2) Press  [PLAY B].
In a few seconds, playback will resume from the point 
at which it stopped last. You can resume playback at 
the same point even if you turn off the unit.
To cancel the resume playback and start playing back 
the disc from the beginning, press [STOP C] again 
while the playback is stopped.
Resume Playback
Note
•  For MP3/JPEG files, playback will resume from the 
beginning of the file at which playback was stopped.
Note
•  Forward/reverse speed will be indicated with icons 
as follows.
  forward (approx. speed)
 2x: 
 20x: 
 40x: 
  reverse (approx. speed)
 5x: 
 20x: 
 40x: 
1) During playback, press [FWD D] or [REV E].
Every time you press [FWD D] or [REV E], 
approximate speed will be changed as follows. 
Fast forward or fast reverse playback across titles (for 
DVD), or files (for MP3 files) is not possible.
20xnormal
speed
playba c k2x 20x 5x 40x 40xREV FWD
REV FWD
REV FWD
REV FWD
REV FWD
REV FWD
For audio CD, MP3 files, approximate speed is fixed at 
8x with sound.
2) Press  [PLAY B] to return to the normal playback.
Fast Forward / Fast Reverse Playback
Skipping TV Commercials During 
Playback
     
      
 
E7K7AUD_D-R410KU_EN.indd   52E7K7AUD_D-R410KU_EN.indd   522007/12/14   15:03:242007/12/14   15:03:24 
						

							53 EN53 EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
Others
SPECIAL PLAYBACK
Rapid playback function is available only during 
playback.
This function is available only on discs recorded in the 
Dolby Digital format, and plays back in a slightly faster/
slower speed while keeping the sound output.
1) During playback, press [
1.3X / 0.8X PLAY].
B x0.8 :
Press [1.3X / 0.8X PLAY] once during playback.Plays back approximately at 0.8 times of normal 
playback.
B x1.3 :
Press [1.3X / 0.8X PLAY] twice during playback.Plays back approximately at 1.3 times of normal 
playback.
B :Press [
1.3X / 0.8X PLAY] thrice to play back in 
normal speed.
No effects.
2) Press  [PLAY B] to return to the normal playback.
Rapid Playback
     
Note
•  Audio (language) setting cannot be changed while 
using this mode.
•  This feature may not work at some point in a disc.
•  Audio is LPCM (2 channel) during rapid playback.
Step by Step Playback
     
1) During playback, press [PAUSE F].
Playback will be paused and sound will be muted.
2) Press  [SKIP i ] repeatedly.
Playback will advance one frame at a time when you 
press [SKIP i ] with the sound muted.
To play back step by step backward:
Press [SKIP j ] repeatedly.
Every time you press the button, the playback will go 
backward by one frame.
•  Press and hold [SKIP j ] / [SKIP i ] to reverse/ 
advance continuously.
3) Press  [PLAY B] to return to the normal playback.
Note
•  Forward/reverse speed will be indicated with icons 
as follows.
  forward (approx. speed)
 1/16x: 
 1/8x: 
 1/3x: 
  reverse (approx. speed)
 1/16x: 
 1/8x: 
 1/4x: 
Slow Forward / Slow Reverse Playback
     
1) During playback, press [PAUSE F]. Then press 
[FWD D] or [REV E].
Every time you press [FWD D] or [REV E], 
approximate speed will be changed as follows. (The 
sound will remain muted.)
1/8xpause1/16x 1/8x 1/16x 1/3x 1/4xREV FWDREV FWDREV FWDREV FWDREV FWDREV FWD
2) Press  [PLAY B] to return to the normal playback.
E7K7AUD_D-R410KU_EN.indd   53E7K7AUD_D-R410KU_EN.indd   532007/12/14   15:03:272007/12/14   15:03:27 
						

							54 EN54 EN
SPECIAL PLAYBACK
Zoom
Note
•  When selecting a smaller factor than the current one, 
the zoom area will not be displayed.
•  To exit the zoom menu, press [DISPLAY] repeatedly.
•  To cancel the zoom function, select “x1.0” using 
[K / L], then press [ENTER] at step 3.
•  You cannot slide the zoomed picture on some JPEG 
files.
1) During playback, press [DISPLAY] or [ZOOM].
•  If you press [ZOOM], skip to step3.
2) Use  [{ / B] to select 
 , then press [ENTER] within  
1 second, or wait for 1 second to display the 
selection menu.
e.g.) DVD-video
1/   5 1/   5DVD0:01:00 / 1:23:45Video
3) Use  [K / L] to select a desired zoom factor to zoom, 
then press [ENTER]. 
1/   5 1/   5DVD× 1.2
× 1.5
× 2.0
0:01:00 / 1:23:45Video
Zoom menu will appear.
There are four options 
(x1.0, x1.2, x1.5 and x2.0), these are displayed 
excluding the current zoom rate.
Zoom area will be displayed.
4) Use  [K / L / { / B] to select a desired zoom 
position, then press [ENTER].
Zoom playback will start.This feature allows you to assign a specific point on a disc 
to be called back later.
• For audio CD, skip to step 2.
1) During playback, press [DISPLAY].
2) Use  [{ / B] to select 
 , then press [ENTER] within 
1 second, or wait for 1 second to display the marker 
list.
e.g.) DVD-video
1/   5 1/   5DVD0:01:00 / 1:23:45Video
3) Use  [K / L] to select a desired marker number. 
When it reaches the desired point, press [ENTER].
1/   5 1/   5DVD---
---
---
---
---
---123456
0:01:00 / 1:23:45Video
The title (track) number and the time will be displayed.
4) To return to the marker:
Use [K / L] to select the desired marker number, 
then press [ENTER].
Marker Setting
Note
•  To clear a marker, select the marker number to be 
cleared, then press [CLEAR].
•  All markers will be erased when you operate these 
operations listed below.
– Opening the disc tray
– Turning off the power
– Recording on a recordable disc
•  You can mark up to 6 points.
            
E7K7AUD_D-R410KU_EN.indd   54E7K7AUD_D-R410KU_EN.indd   542007/12/14   15:03:292007/12/14   15:03:29 
						

							55 EN55 EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
Others
SPECIAL PLAYBACK
Chasing Playback during Recording
Note
•  Playback image may freeze momentarily using this 
function.
However, this does not affect the recording.
•  The 2x fast forward playback is not available.
• [REC I] is not available during this function.
•  You must cancel this function first by pressing 
[STOP C] once. Then you can use [REC I] to use 
OTR (one-touch timer recording) function or change 
recording time for the OTR.
•  “Wait for a moment.” will be displayed on the screen 
if you press [PLAY B] before 1 minute of recording.
• This function is available only when you are 
recording on a DVD-RW in VR mode, with the 
recording mode LP, EP or SLP.
You can play back the already recorded part of the 
currently recording program without waiting for the 
recording to the end. This function works from 1 
minute after the start of the recording.
1) During recording, press [PLAY B].
Playback will start from the beginning of the program 
that you are currently recording.
Screen for the current playback:
1/   5 1/   50:01:00 / 1:23:45-RWVRORG
If you play back the fast forward playback and the 
playback reaches the scene recorded 1 minute before, 
the forwarding playback will automatically return to 
the normal playback.
2) Press  [STOP C] once to stop playback.
The resume message will appear.
Screen for the current recording:
L1
551:23:45
LP 1:01Resume ON
-RWVRORG
To stop recording, press [STOP C] again.
To cancel the resume, press [STOP C] again.
 
Using [TIME SLIP] ...
With [TIME SLIP], even if you leave your couch while 
you are watching TV through this unit, you can come 
back and watch rest of the program from right where 
you left at any convenient time with just one button. 
Please make sure to put VR mode DVD-RW disc, and set 
the recording mode to LP, EP or SLP.
1) While viewing a TV broadcast via this unit, press 
[TIME SLIP].
This unit start to record the TV broadcast.
2) Press [TIME SLIP] again.
Playback will start from the point at which you press 
[TIME SLIP] first while recording continues.
•  While viewing the recorded content, you can pause 
and resume the playback by pressing [TIME SLIP].
3) Press  [STOP C] once to stop playback.
To stop recording, press [STOP C] again.
To cancel the resume, press [STOP C] again.
E7K7AUD_D-R410KU_EN.indd   55E7K7AUD_D-R410KU_EN.indd   552007/12/14   15:03:312007/12/14   15:03:31 
						

							56 EN56 EN
You can also play back a recorded title during current 
recording or the timer recording on the same disc.
1) During recording, press [DISPLAY].
Screen for the current recording:
L1
311:23:45-RWVRORG
2) Select  icon using [{ / B], then press [ENTER].
The title number next to 
 will be highlighted.
Title:
Enter a desired title number to search using
[K / L] or [the Number buttons], then press 
[ENTER].
Selected title playback will start.
Chapter:
To move to 
 for chapter, press [B].
Enter a desired chapter number to search using 
[K / L] or [the Number buttons], then press 
[ENTER].
Selected chapter playback will start.
If you play back the currently recording program and the 
playback reaches the scene recorded 1 minute before, 
the forwarding playback will automatically return to the 
normal playback.
Simultaneous Playback and Recording
SPECIAL PLAYBACK
3) Press  [STOP C] once to stop playback.
The resume message will appear.
Screen for the current recording:
 
L1
311:30:25
LP 1:01Resume ON
-RWVRORG
To stop recording, press [STOP C] again. 
To cancel the resume, press [STOP C] again.
Note
•  Playback image may freeze momentarily using this 
function.
However, this does not affect the recording.
•  The 2x fast forward playback is not available.
• This function is available only when you are 
recording on a DVD-RW in VR mode, with the 
recording mode LP, EP or SLP.
•  Only the titles (chapters) in the original can be 
selected.
You cannot select titles from the title list.
•  When you stop the playback after the timer 
recording is completed, the unit will be switched to 
the timer standby mode if another program has been 
set (refer to “Hints for Timer Recording” on page 39).
E7K7AUD_D-R410KU_EN.indd   56E7K7AUD_D-R410KU_EN.indd   562007/12/14   15:03:322007/12/14   15:03:32 
						

							57 EN57 EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
Others
SEARCH
Using [SKIP j ] / [SKIP i ]
1) During playback, press [SKIP i ] to skip the 
current title or chapter and move to the next.
The title or chapter will move forward by one at a time.
•  If there is no chapter in one title, the current title will 
be skipped. 
To go back to the beginning of the current title or 
chapter, press [SKIP j ].
Press it twice in quick successions to go to the previous 
title or chapter. The title or chapter will move 
backward one title at a time.
Using [DISPLAY]
1) During playback, press [DISPLAY].
2) Use  [{ / B] to select 
 , then press [ENTER].
e.g.) DVD-video
1/   5 1/   5DVD0:01:00 / 1:23:45Video
The number next to  will be highlighted.
3) Title:
Use [K / L] or [the Number buttons] to enter a 
desired title number to search, then press [ENTER].
Title search will start.
Chapter:
Press [B] to move to the number next to 
 for 
chapter. 
Use [K / L] or [the Number buttons] to enter a 
desired chapter number to search, then press 
[ENTER].
After the search, playback will start automatically.
Title/Chapter Search
      
Note
•  In search mode display, total numbers of each search 
contents (title/chapter/time) are shown as a 
denominator.
1/   5 1/   5 0:01:00 / 1:23:45DVDVideo
total number 
of titles
total number 
of chapterstotal time
of the title
Using [SKIP j ] / [SKIP i ]
1) During playback, press [SKIP i] to skip the 
current track/file and move to the next.
The track/file will move forward one at a time.
To go back to the beginning of the current track/file, 
press [SKIP j ].
Press it twice in quick successions to go to the previous 
track/file. The track/file will move backward one at a 
time.
Track Search
Note
•  During CD playback, you can enter a track number 
directly using [the Number buttons] for track search 
without displaying the menu.
  
Using [DISPLAY]
• For audio CD or MP3, skip to step 2.
1) During playback, press [DISPLAY].
2) Use  [{ / B] to select 
 , then press [ENTER].
e.g.) audio CD
1/   5CD0:00:15 / 0:05:00
e.g.) MP3 files
1/   50:00:15MP3
The number next to  will be highlighted.
3) Use  [K / L] or [the Number buttons] to enter a 
desired track/file number to search, then press 
[ENTER].
After the search, playback will start automatically.
E7K7AUD_D-R410KU_EN.indd   57E7K7AUD_D-R410KU_EN.indd   572007/12/14   15:03:322007/12/14   15:03:32 
						

							58 EN58 EN
• For audio CD, skip to step 2.
1) During playback, press [DISPLAY].
2) Use  [{ / B] to select 
 , then press [ENTER].
e.g.) DVD-video
1/   5 1/   5 0:01:00 / 1:23:45DVDVideo
e.g.) audio CD
1/   5CD0:00:15 / 0:05:00
The number next to  will be highlighted.
To move to the number next to 
 , press [B].
When time search is not available, 
 and time 
counter are not displayed.
3) Use  [K / L / { / B] or [the Number buttons] to 
enter a desired time to search, then press [ENTER].
After the search, playback will start automatically.
Note
•  Time search is available only in the same track, file or 
title.
Time Search
      
SEARCH
E7K7AUD_D-R410KU_EN.indd   58E7K7AUD_D-R410KU_EN.indd   582007/12/14   15:03:342007/12/14   15:03:34 
						

							59EN59EN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
Others
REPEAT/RANDOM/PROGRAM PLAYBACK/SLIDE SHOW
Repeat Playback
Random Playback
  
Available repeat function may vary depending the discs.
•  For audio CD or MP3, skip to step 2, or press [REPEAT] 
and skip to step 3.
1) During playback, press [DISPLAY] or [REPEAT]. •  If you press [REPEAT], skip to step3.
2) Use  [{ / B] to select 
 , then press [ENTER] within  
1 second, or wait for 1 second to display the 
selection menu.
1/   5 1/   5DVD0:01:00 / 1:23:45Video
3) Use  [K / L] to select a desired option to repeat,  then press [ENTER].
e.g.) DVD-video
1/   5 1/   5DVDOFF
Title
Chapter
A - B
0:01:00 / 1:23:45Video
e.g.) audio CD
1/   5CD0:00:15 / 0:05:00
Track
All
A - BOFF
e.g.) MP3/JPEG files
1/   50:00:15MP3
Track
All
GroupOFF
The selected repeat playback will start.
Repeat
Title
1/   5 1/   5DVD0:01:00 / 1:23:45Video
Title:
The current title will be played back repeatedly.
Chapter:
The current chapter will be played back repeatedly.
All:
The current disc will be played back repeatedly.
A-B:
Desired section can be played back repeatedly.
1) Use [K / L] to select “A-B”, then press [ENTER].
2) Press [ENTER] at the desired starting point A.
3) Press [ENTER] at the desired ending point B.
Track:
The current track or file will be played back repeatedly.
Group:
The current folder will be played back repeatedly.  You can play back a disc randomly instead of playing 
back in the original order.
1) Press [SETUP] in stop mode.
2) Use  [K
 / L] to select “CD Playback Mode”,  then press 
[ENTER].
“CD Playback Mode” menu will appear.
3) Use  [K / L] to select “Random Play”, then press  [ENTER].
Random playback will start.
e.g.) audio CD
1/   50:00:15 / 0:05:00
RandomCD
Note
•  To cancel random playback, press [STOP  C] twice 
during random playback. “OFF” appears on the 
display menu.
Note
•  Point B for the repeat A-B playback should be set  within the same title or track of point A.
•  To cancel the repeat playback, select “OFF” at step 3.  The repeat setting will also be canceled when you 
stop playback.
•  You cannot select “Group” during the random  playback of MP3/JPEG files.
•  Chapter/Track repeat will be canceled whenever a  Chapter/Track is skipped forward or backward.
•  During the A-B repeat, if you reaches the point A  with any reverse playback, the reverse playback will 
be canceled and the A-B repeat playback resumes 
from point A.
E7K7AUD_D-R410KU_EN.indd   59 E7K7AUD_D-R410KU_EN.indd   59 2007/12/27   14:31:02
2007/12/27   14:31:02 
						

							60 EN60 EN
Program Playback
Note
•  To erase tracks you selected, press [CLEAR] at step 4.
•  You can make program settings up to 50 tracks.
•  To cancel program playback, press [STOP C] twice 
during program playback. “OFF” appears on the TV 
screen.
•  You may also select a desired track using [the 
Number buttons] at step 4.
REPEAT/RANDOM/PROGRAM PLAYBACK/SLIDE SHOW
You can program the disc to play back in your desired 
order.
1) Press [SETUP] in stop mode.
2) Use  [K / L] to select “CD Playback Mode”, then press 
[ENTER].
“CD Playback Mode” menu will appear.
3) Use  [K / L] to select “Program Play”, then press 
[ENTER].
4) Use  [K / L] to select a desired track, then press 
[ENTER] or [B].
CD Playback Mode
Program Play
0:00:00 Total --
--------------------------------------------------------------------------------------------------
Repeat this step until you program all the desired 
tracks.
5) Press  [PLAY B].
CD Playback Mode
Program Play
0:31:07 Total 09
041006--------------------------------------------------------------------------------------------
Program playback will start.
Slide Show
You can select the display time between 5 seconds and 
10 seconds.
1) Follow steps 1 and 2 in “Program Playback” on the 
left.
2) Use  [K / L] to select “Slide Show”, then press 
[ENTER].
3) Use  [K / L] to select the display time, then press 
[ENTER].
4) Press [SETUP] to exit.
Note
•  Large-size JPEG files take a few moments to be 
displayed.
E7K7AUD_D-R410KU_EN.indd   60E7K7AUD_D-R410KU_EN.indd   602007/12/14   15:03:362007/12/14   15:03:36