Toshiba Dr160 User Guide

Recording
English - 41
Copying from a Camcorder
You may control a Digital Camcorder using the IEEE1394 (DV) 
interface.
Before you start
Check that the disc has enough available space for the recording. 
Adjust the record mode. See page 25 to see how to connect the 
camcorder to your DVD recorder.
1.  Press the OPEN/CLOSE button, and place a recordable disc on the 
disc tray.
2.  Press the OPEN/CLOSE button to close the disc tray. 
Wait until “LOAD” disappears from the front panel display.
3.  
Press the...

Recording
English - 42
Making a One Touch Recording (OTR)
You can set the DVD Recorder to record in preset increments by 
pressing the REC button repeatedly.
1.  If you want to record from a connected external component, press the 
INPUT SEL. button to select an appropriate external input(AV1, AV 2 or 
DV).    
2. Press the REC button to start recording.
3.  Press the REC button to adjust the recording time.

Recording
English - 43
Setting a Timer Recording
You need to set the Clock (Setup – Clock Set) before proceeding 
with a timer recording. (See page 31)
1.  Press the OPEN/CLOSE button, and place a recordable disc on the 
disc tray.
2.  
Press the OPEN/CLOSE button to close the disc tray.
Wait until “LOAD” disappears from the front panel display.
If an unused DVD-RW disc is inserted, whether to initialize or not will 
be asked fi rst. (See page 37)
3.  Press the MENU button in Stop mode.
You can also set a...

Recording
English - 44
  If the timer settings overlap
The fi rst program has priority. After recording of the fi rst program 
is complete, the second program starts being recorded.
  The timer recording time may differ from the set time depending 
on the disc and the overall timer recording status (for example, 
recording times overlapping, or when the previous recording ends 
within 3 minutes of the start of the next recording.)
     will start blinking if Timer Recording is not ready to start.
Flexible...

Recording
English - 45
Deleting the Scheduled Record List
You can delete timer record list using the scheduled record list menu.
1. Press the MENU button in Stop mode.
2.  Press the ▲▼ buttons to select Timer Rec., and then press the 
ENTER or ► button.
3.  
Press the ▲▼ buttons to select Scheduled Record List, and then 
press the ENTER or ► button.
4.  Press the ▲▼ buttons to select the number of the timer recording you 
want to delete, and then press the ENTER or ► button.
The Edit and Delete items are...

Recording
English - 46
EZ REC MODE
This function allows you Initialize and Finalize a  disc automatically.
1.  With the unit in Stop/No Disc mode, press the EZ REC MODE button 
on the remote control.
2.  Press the ◄ ► buttons to select On, and then press the ENTER 
button.
The EZ REC MODE is set up.
3.  Insert a disc.
If the disc is new, it will initialize automatically.
4.  Press the REC button.
5.  EZ REC MODE will Automatically Finalize the disc under the following 
conditions.
-  When you press the...

English - 47
Playback
Playback
This section introduces basic playback functions and 
playback by disc type.
Read the following information before playing a disc.
Region code (DVD-Video only)
Both the DVD recorder and the discs are 
coded by region. These regional codes must 
match in order for the disc to play. If the codes 
do not match, the disc will not play. The Region 
Number for this recorder is described on the 
rear panel of the recorder.
Logos of Discs that can be played
Disc types that can be...

English - 48
Playback
Discs that cannot be played
• DVD-Video with a region number other than “1” or “ALL”
• 5” 2.6 GB and 5.2 GB DVD-RAM
• 3.9 GB DVD-R Disc for Authoring.
•  A DVD±R/DVD-RW(V) disc which has been recorded and not fi nalized in 
a different manufacturers recorder.
• PAL discs
• DVD-ROM/PD/MV-Disc, etc.
• Video CD/CVD/SVCD/CD-ROM/CDV/CD-G/CD-I
• Blu-Ray/HD-DVD discs
  This DVD recorder can only operate with discs that are compatible 
with DVD-RAM Standard Version 2.0.
  This player...

English - 49
Playback
Using the Disc Menu & Title Menu
Some discs contain a dedicated menu system that allow you to 
select special functions for the title, such as chapters, audio track, 
subtitles, fi lm previews, information on characters, etc.
For DVD-VIDEO discs
Disc Menu : Press the DISC MENU button to enter the discs menu.
• Move to the setup menu related to the playback operation.
•  
You can select the audio language and the subtitles provided by the disc.
Title Menu : Press the TITLE MENU button...

English - 50
Playback
  No sound is heard during Scan(Search) mode except fast 1 
playback (1.7X speed) mode.
For CD(CD-DA), You can hear sound during Scan mode.
You cannot hear audio while scanning an MPEG4.
  The speed marked while scanning may be different from the 
actual playback speed.
Searching Chapters or Tracks
During playback, press the SKIP(            ) button on the remote control.
•  If you press the SKIP(      ) button, it moves to the beginning of the 
chapter or track or marker...