Toshiba D-vr600ku Manual
Have a look at the manual Toshiba D-vr600ku Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Recording 51 00 : 00 : 00 SP SP DVD mode VCR mode OTR: 30 min. One-touch Timer Recording (OTR) The One-touch Timer Recording fea- ture provides a simple and convenient way to make a timed recording. The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs and other materials, is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and/or criminal liability. Preparation: •Connect the AUDIO (L/R)/VIDEO IN jacks on the rear panel (INPUT 1) to the AUDIO (L/R)/VIDEO OUT jacks of the Cable/Satellite box. •Turn ON the TV and set to the video input mode. •Load a recordable DVD or video tape into the unit. •Press DVD or VCR to select the appropriate mode. Example: One-touch Timer Recording for 30 minutes. 1Press REC MODE/SPEED to select the re- cording mode. For the recording mode, see step 1 on page 50. 2Press INPUT SELECT to select “LINE1” input position. “L1” will appear on the display window. •To record from AUDIO (L/R)/VIDEO IN jacks on the front panel (INPUT2), select “LINE2” (L2). L1:AUDIO (L/R)/VIDEO IN on the rear panel (INPUT1) L1(S): AUDIO (L/R)/S-VIDEO IN on the rear panel (INPUT1) L2: AUDIO (L/R)/VIDEO IN on the front panel (INPUT2) L2(S): AUDIO (L/R)/S-VIDEO IN input on the front panel (IN- PUT2) Confirm whether the input source that you used is appeared on the display window. 3Select the channel you wish to record on your cable/satellite box. 4Press REC/OTR. Each additional press of REC/OTR will increase recording time as shown in the chart below, up to a maximum of 6 hours. The OTR and recording time will appear on the screen for about 4 seconds. NOTES: •If you wish to watch the DVD playback during the VCR OTR, press DVD to change to DVD mode and perform the DVD playback. You can also playback the VCR during DVD OTR. •You cannot set OTR that exceeds the remainder amount time of disc when recording in disc. To cancel OTR Press STOP or turn off the power. “ ” will appear on screen for about 4 sec- onds. Press Recording time Press Recording time once Normal REC 7 times OTR: 180 min. twice OTR: 30 min. 8 times OTR: 240 min. 3 times OTR: 60 min. 9 times OTR: 300 min. 4 times OTR: 90 min. 10 times OTR: 360 min. 5 times OTR: 120 min. 11 times OTR: Off 6 times OTR: 150 min.(Normal REC) P 2K70101A_E P44-5108`02`07, 20:45 51
Recording 52Timer recording The timer recording system allows you to select the date, time and channel and record the desired pro- grams. Up to 12 timer programs within a month can be stored in this unit. The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs and other materials, is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and/or criminal liability. NOTE: If a recordable tape is not inserted or no disc space is available, the timer record indicator “ ” flashes. Replace the tape or disc to allow recording. Setting timer recording Preparation: •Connect the AUDIO (L/R)/VIDEO IN jacks on the rear panel (INPUT 1) to the AUDIO (L/R)/VIDEO OUT jacks of the Cable/Satellite box. •Turn ON the TV and set to the video input mode. •Load a recordable DVD or video tape. •Confirm that the clock is indicating the correct time. Example: Set the recording mode to LP; the TV program from Cable/ Satellite box connected to L1 starting at 8:00 PM and stopping at 9:30 PM on a date of 20th. Recording to DVD. 1Press SETUP. The SETUP MENU screen appears. Press or to select “Timer REC” and press ENTER. General A/V Output Timer REC Recording Other 2The Timer REC screen will appear. Timer REC Mar 19, 2007- 05:11PM Rec Starting time 03/19/07 _ 08:30PMLength Source Status 01:00 Line 1 [S] ReadyTimer Recordings: 1/12 Press ENTER to add a new Timer Recordings DVD •When there is no timer program, New Timer Recording screen below will appear automatically. 3Press or to select and press ENTER. The New Timer Recording screen will appear. Timer REC Mar 19, 2007- 05:11PM REC Starting time Length Source StatusTimer Recordings: 1/12 Press ENTER to add a new Timer Recordings 03/19/07 _ 08:30PM 01:00 Line 1 [S] Ready DVD New Timer Recording Press RETURN to CANCEL Start Time: End Time: Source: Recurrence: Rec To: Rec Mode:05:30 PM 03/19/07 06:30 PM 03/19/07 Line 1 [S] Once DVD XP : 1 hour Add Cancel 2K70101A_E P52-5508`02`07, 20:45 52
Recording 53 Timer recording 4Press or to select time of “Start Time”, and press ENTER. Press or to select hour, minute or AM/PM and press or to change value. Then press ENTER. Press to select date of “Start Time”, and press ENTER. Press or to select month, date or year and press or to change value. Then press ENTER. New Timer Recording Press RETURN to CANCEL Start Time: End Time: Source: Recurrence: Rec To: Rec Mode:08:00 PM 03/20/07 09:00 PM 03/19/07 Line 1 [S] Once DVD XP : 1 hour Add Cancel 5Set time and date of “End Time” as way of step 4, and press ENTER. 6Press or to select “Source”, and press ENTER. Press or to select an input, and press ENTER. L1: AUDIO (L/R)/VIDEO IN on the rear panel (INPUT1) L1(S): AUDIO (L/R)/S-VIDEO IN on the rear panel (INPUT1) L2: AUDIO (L/R)/VIDEO IN on the front panel (INPUT2) L2(S): AUDIO (L/R)/S-VIDEO IN on the front panel (INPUT2) 7Press or to select “Recurrence”, and press ENTER. Press or to select a type of recurrence, and press ENTER. 8Press or to select “Rec to”, and press ENTER. Press or to select “DVD” or “VCR” which you use to record, and press ENTER. 9Press or to select “Rec Mode”, and press ENTER. Press or to select recording mode, and press ENTER. 10Press or to select “Add”, and press ENTER. The timer program is determined and the Timer REC screen appears again. New Timer Recording Press RETURN to CANCEL Start Time: End Time: Source: Recurrence: Rec To: Rec Mode:08:00 PM 03/20/07 09:30 PM 03/20/07 Line 1 Once DVD LP : 4 hours AddCancel 11Repeat steps 3 to 10 to enter other program for the timer re- cording. 12Press SETUP. The Timer REC screen disappears and the display will return to the normal screen. 13Press TIMER REC. The timer indicator “ ” will appear on the display and the unit stands by for recording. NOTES: •Past time cannot be set at the “Start Time”. •There is the limitations of the timer programming for the duration of recording depending on the recording mode. DVD: XP : less than 1 hour SP : less than 2 hours LP : less than 4 hours SLP : less than 6 hours VCR : less than 6 hours NOTES: •If you select timer recording on a specified date only one time, select “Once” in the “Recurrence” for re- cording. You can record same days of every week or from Monday to Fri- day using the item “Recurrence”. The items you can select are as fol- lows: Once :Recording on the selected date Daily: Recording everyday at the same time Weekly: Recording same day of the week. (Select the day of the week from “Start Time” or “End Time”) Mon-Fri: Recording from Mon. to Fri. Mon-Sat:Recording from Mon. to Sat. •The starting and ending times for the recording are displayed on the 12- hour (am/pm) clock. Twelve o’clock midnight is displayed as “12:00AM”, whereas twelve o’clock noon is dis- played as “12:00PM”. The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs and other materials, is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and/or criminal liability. NOTE: The warning message will appear when your new schedule is conflicting with other recordings or invalid date/time is input. 2K70101A_E P52-5508`02`07, 20:45 53
Recording 54Timer recording Stopping the timer recording After the timer recording has started, you can cancel the timer record- ing (but continue recording), or stop recording completely if you want. To cancel the timer recording, press TIMER REC. The timer indicator “ ” disappears from the display and recording continues. Press STOP to stop recording completely. Checking or changing the timer recording When you want to check the selected timer recording, follow the steps 1 and 2 of “Setting timer recording” on page 52 and display the Timer REC screen. To change the timer recording, select the program to be changed and press or to select and press ENTER. The changing method is the same as recording a program for the first time. To suspend the timer recording You can suspend the program. Select a program you want to suspend. Press or to select , and press ENTER. The selected program is suspended. Press ENTER again to change the program to “Ready”. Cancelling the timer recording Display the Timer REC screen. Select the program you want to cancel and press or to select and then press ENTER. The selected program will be erased from the timer recording list. The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs and other materials, is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and/or criminal liability. NOTES: •Recording starts a few seconds be- fore the preset starting time. •You cannot use the timer recording for the both DVD and VCR at the same time. •You can playback the DVD during the VCR timer recording, and you can playback the VCR during the DVD timer recording. •The timer recording program is stopped during timer recording, the stopped program is not erased from the timer recording list. In this case, please cancel the program, other- wise the stopped program will be activated if the unit returns to timer recording standby mode. 2K70101A_E P52-5508`02`07, 20:45 54
Recording 55 Chase playback You can begin playback from the beginning of a program currently being recorded. You will find this function of great advantage on long programs, as you do not have to wait for the end of recording to be- gin playback. NOTES: •Chase playback is not available when recording a DVD-RW/R disc, DVD+RW/R disc and video tape. •Chase playback is not available when recording in XP mode. •Instant skip, A-B repeat, and Zoom will not work during chase playback. •Chase playback does not work until 30 seconds of recording have elapsed. •If you press DISPLAY during chase playback, the information screen is displayed (see page 31).1While recording a program onto the DVD-RAM disc, press PLAY to start chase playback. The program as it is being recorded will playback. 2Locate a scene you want through the following operations if nec- essary. Fast forward/Review playback: Press SEARCH / . Every press SEARCH, it switches the speed of the search. •To resume chase playback, press PLAY. •If the playback position catches up to within about 60 seconds, chase playback resumes. It may differ depending on the record- ing condition and search speed. Still playback: Press PAUSE/STILL. •To resume chase playback, press PLAY. Frame advancePress PAUSE/STILL during still playback. One frame is advanced each time you press PAUSE/STILL. •To resume normal playback, press PLAY. Slow motion playback Press SLOW during normal playback or still playback. Each press of SLOW will change the speed of the slow “ x 1/2”, “ x 1/4” and “ x 1/8”. •To resume normal playback, press PLAY. •To resume the still playback, press PAUSE/STILL. Locating a chapter: Press SKIP / to locate a chapter that you want to watch. •If you press SKIP while playing back the newest chapter, it starts playing back from about 30 seconds before the recording position. Locating a specific scene: Press PLAY MODE enables you to do a Time Search or a Chapter Search. (See page 34.) Instant replay Press INSTANT REPLAY during playback. The video returns to a point 10 seconds before and playback resumes. 3Press STOP to end chase playback. If you press STOP again, the recording stops. 2K70101A_E P52-5508`02`07, 20:45 55
Editing the disc 56Editing the disc Title List When the content is recorded, a title name that includes the date, time, channel number and other information is created automatically. The Title List can be used when you playback after confirming the con- tents (see page 30), or when you check the contents recorded on the disc. Title The titles will be added with every recording. In VR mode, you can do various editing operations i.e., you can rename the titles or add the chapter marks. In addition, you can erase the unnecessary titles to increase the disc space. Editable items The items can be edited in each disc as follows: Disc and recording mode DVD-RAM Adding chaptermark Erasing chapter Combining chapters Selecting thumbnail picture Changing title name Erasing title Changing disc name Using these editing functions to modify copyrighted content for any purpose other than your private viewing may be prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability. This section explains how to edit the recorded contents on DVDs. However, the items that you can edit vary with the recording DVDs. On DVD-RAM and DVD-RW (VR mode), you can edit various title menus, whereas on the other discs, you can edit only a few items. NOTES: •This unit cannot record or edit a disc which was recorded or edited using another DVD recorder. •You cannot edit or record the disc on which disc protection is set. In such a case, be sure to cancel the disc protection before starting the operation.If you finalize the disc in Video mode, the Title List is automatically changed. The recording information will not appear in the Title List after finalizing. Editing items DVD-RW DVD-R DVD+RW DVD+R – – – –– – – –– – – –– – – – – VR Video 2K70101A_E P56-6308`02`07, 20:45 56
Editing the disc 57 Adding chapter mark NOTE: You can automatically add a chapter mark in recording. For more informa- tion, see page 27. Preparation: • Turn ON the TV and set to the video input mode. • Load the recorded disc. • Press DVD to select the DVD mode. (The DVD indicator will light.) You can add a chapter mark to the title. You can add up to 999 chapter marks to one disc. 1Press TITLE MENU to display the Title List. Title List Rename Line 1 Feb 2, 2007-4:30 PMNo Label Title:I Rec Mode: XPRemain: 55m XP Total: 4 titles Line 1 (S) Feb 13, 2007-12:00 PM Line 2 Mar 1, 2007-8:30 AM Line 2 (S) Mar 16, 2007-3:00 PM Play 01:00:28 / 02:07:58 2Press or to select the title where a chapter mark is added. Press PLAY. The message below will appear at the lower of the screen for approx. 5 seconds. •Playing back must be started through Title List for this opera- tion. Press ENTER to open action bar 3Press ENTER. The screen below will appear on the screen. Press or to select (Add chapter mark). •To return to the normal screen, press or to select (Hide bar), and press ENTER. Add chapter mark 4Press ENTER at the point where you want to add a chapter mark. A new chapter mark is added. • Search the scene by using each operation button (F.FWD, REW, SKIP6, SKIP7, PAUSE/STILL, SLOW, INSTANT SKIP) for the playback. 5If you want to continue to add chapter mark, repeat step 4. 6Adding chapter marks is finished. •To display the Title List, press TITLE MENU. 2K70101A_E P56-6308`02`07, 20:45 57
Editing the disc 58Erasing chapter You can erase an unnecessary chapter (scene). Erase the chapter after checking the title. You cannot restore the erased scene. When you erase the scene, you can increase the disc space. 1Press TITLE MENU to display the Title List. 2Press or to select the title where a chapter is deleted. 3Press or to select (Chapter List), and press ENTER. Title List will change to Chapter List of the selected title. Chapter 1 Chapter 2 Chapter 3 Chapter 4Total: 55 chapters Play00:00:04 / 04:25:47 Chapter ListLine 1 [S] Remain: 30m XP 4Press or to select chapter which you want to erase. 5Press or to select (Delete), and press ENTER. The screen below will appear. Press or to select “Yes” and press ENTER. Total: 55 chaptersAre you sure you want to delete chapter? Delete Ye s N o 6Selected chapter is deleted. •To return to the Title List, press or select (Return) and press ENTER, or press RETURN. 2K70101A_E P56-6308`02`07, 20:45 58
Editing the disc 59 Combining chapters The adjacent two chapters can be combined. 1Press TITLE MENU to display the Title List. 2Press or to select the title where you want to combine the chapters. 3Press or to select (Chapter List), and press ENTER. Title List will change to Chapter List of the selected title. 4Press or to select a chapter. 5Press or to select (Combine), the selected chapter and the next chapter is highlighted. Chapter 1 Chapter 2 Combine with Chapter 3 Chapter 4Total: 55 chapters Combine- -:- -:- - / - -:- -:- - Chapter ListLine 1 [S] Remain: 30m XP 6Press ENTER. Two chapters are combined as one chapter. •To return to the Title List, press or select (Return) and press ENTER, or press RETURN. To combine the all chapters: All chapters in the title can be combined as one chapter. 1After step 3 above, press or to select (Combine All). 2Press ENTER. All the chapters are combined as one chapter. •To return to the Title List, press or select (Return) and press ENTER, or press RETURN. 2K70101A_E P56-6308`02`07, 20:45 59
Editing the disc 60 Selecting thumbnail picture You can change the thumbnail picture. 1Press TITLE MENU to display the Title List. Title List Rename Line 1 Feb 2, 2007-4:30 PMNo Label Title:I Rec Mode: XPRemain: 55m XP Total: 4 titles Line 1 (S) Feb 13, 2007-12:00 PM Line 2 Mar 1, 2007-8:30 AM Line 2 (S) Mar 16, 2007-3:00 PM Play00:00:03 / 00:01:18 2Press or to select the title where you want to change the thumbnail picture. Press PLAY. The message below will appear at the lower of the screen for approx. 5 seconds. •Playing back must be started through Title List for this opera- tion. Press ENTER to open action bar 3Press ENTER. The screen below will appear on the screen. Press or to select (Select thumbnail picture). •To return to the normal screen, press or to select (Hide bar), and press ENTER. Select thumbnail picture 4Press ENTER when your desired scene is appeared. • Search the scene by using each operation button (F.FWD, REW, SKIP6, SKIP7, PAUSE/STILL, SLOW, INSTANT SKIP) for the playback. 5A new thumbnail picture is registered. •To display the Title List, press TITLE MENU. Title List Rename Line 1 Feb 2, 2007-4:30 PMNo Label Title:I Rec Mode: XPRemain: 55m XP Total: 4 titles Line 1 (S) Feb 13, 2007-12:00 PM Line 2 Mar 1, 2007-8:30 AM Line 2 (S) Mar 16, 2007-3:00 PM Play00:00:03 / 00:01:18 2K70101A_E P56-6308`02`07, 20:45 60