Toshiba D-rw2 Manual

61
Recording
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
Others
EN
Timer Recording
You can program the unit to record up to 8 programs 
within a month in advance. Daily or weekly program 
recordings are also available.
•  Be sure to set the clock before setting a timer 
programming.
•  Insert a recordable disc.
1
  Press [TIMER PROG.].
Timer Programming list will appear.
2
 Using [K / L], select a program number. 
Press [ENTER].
(Continued)
Start
Timer Programming
2....

62
Recording
EN
Timer Recording (cont’d)
3
 Using [K / L], enter the Date. 
Press [B].

4
 Using [K / L], enter the Start and End. 
Press [B].
• 0:00 will be displayed as 12:00 AM.
Timer Programming
2.     ---
3.     ---
4.     ---
5.     ---
6.     ---
7.     ---
8.     --- 1. JAN/01 --:-- --:-- L1
 Date Start End CH Mode
Daily (Everyday)
MON-SAT (Monday to Saturday)JAN/01
JAN/31 (one month later minus one day)MON-FRI (Monday to Friday)
SAT (Saturday)
FRI (Friday)
SUN (Sunday)
When pressing [L] at the...

63
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
Others
EN
5
 Using [K / L], select the channel number to 
record. Press [B].
To record from external input, select L1 or L2, which is 
found at the before channel 1.
6
 Using [K / L], select a recording mode. 
Refer to “Recording mode” on page 65.
If you choose “Auto”, the unit automatically selects the best 
recording mode to make the best quality picture according to 
the remaining disc space.
• This function works only...

64
Recording
EN
Timer Recording (cont’d)
Notes
• If you have not set the clock yet:
  A manual clock setting menu will appear instead of the Timer Programming list at step 1. Continue with step 4 in “Manual 
Clock Setting” on page 41 before setting a timer programming.
• Press [s / B] to move the cursor to the left and the right in the Timer Programming list.
•  After step 8, the recording will start immediately before the recording time you set.
7
  Press [ENTER] when information is entered. 
Your...

65
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
Others
EN
■ Recording Mode
You can select a recording mode among 6 options, and the recording time will depend on the recording mode you 
select as follows.
* Discs recorded in SLP or SEP on this recorder may not be played back on other DVD recorders or DVD 
players.
Disc SizeRecording 
modeRecording 
timeVideo/Sound 
Quality
8cm Disc      XP18 min
★★★★★★
      SP36 min
★★★★★
      LP72 min
★★★★
      EP108 min
★★★...

66
Recording
EN
Timer Recording (cont’d)
Checking, canceling, or correcting 
the timer programming 
information
1) Press  [I/y ON/STANDBY].
        indicator disappears from the front panel display.
2) Press [TIMER PROG.].
Timer Programming list will appear.
3) Check the information on the list to be edited.
4) To clear the timer programming:
Using [K / L], select your desired program. 
Press [CLEAR].
  To correct the timer programming:
Using [K / L], select your desired program. Press 
[ENTER].
Then,...

67
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
Others
EN
Hints for Timer Recording
● If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer 
programming will be lost.
● If a disc is not on the tray, the     indicator flashes and Timer Recording cannot be performed. In some cases, the     
indicator appears momentarily around the start point as the unit attempts to record. Please insert a recordable disc.
●...

68
Recording
EN
Settings for an external source
Connection to an external source
1
Press [SETUP]. 
2
 Using [K / L], select “Required Setting”. 
Press [ENTER].
Start
Connect the external source properly to the unit by using input jacks either LINE2 (Front) or LINE1 (Rear).
When connecting an external equipment with monaural output to this unit, use AUDIO L jack of LINE2 (Front).
Use S-Video or Video cable and an Audio cable (commercially available) for this connection.
I /y REC MODERECCHON/STANDBY...

69
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
Others
EN
3
 Using [K / L], select “Select Video”. 
Press [ENTER].
4
 Using [K / L], select “L2 (Front)” or 
“L1 (Rear)”. Press [ENTER].
5
 Using [K / L], select the input jack type to 
connect. Press [ENTER].
If you want to use S-VIDEO input jack, select “S-Video In”.
If you want to use VIDEO input (Composite) jack, select 
“Video In”.

6
  Press [SETUP] to exit.
Select Video 
L2 (Front)  Video In L1 (Rear)  Video In...

70
Recording
EN
Recording from an external source
Settings for an external source (cont’d)
REC MODEREC
CHON/STANDBY
I /y 
6 5
2 3
48
Before recording from an external source, see the 
instructions for the connection on page 68.
1
  Turn the TV and this unit on, and be sure to 
select the input of the TV to which the unit is 
connected.
2
 Press [OPEN/CLOSE A] to open the disc tray. 
Place the disc to record properly.
3
 Press [OPEN/CLOSE A] to close the disc tray. 
Start
This operation may take a while...