Home > Toshiba > DVD Recorder > Toshiba D-r17dt User Manual

Toshiba D-r17dt User Manual

Here you can view all the pages of manual Toshiba D-r17dt User Manual. The Toshiba manuals for DVD Recorder are available online for free. You can easily download all the documents as PDF.

Page 71

EN71
Introduction ConnectionsBasic Setup Playback
EditingOthers Function Setup
Recording
Playback
1
In stop mode, press [SETUP]. Select 
“General Setting” using [U / D], 
then press [ENTER/OK].
2Select “Playback” using [U / D], 
then press [ENTER/OK].
3Select a desired item using [U / D], 
then press [ENTER/OK].
4Refer to 1. to 8. on pages 71 to 73 
and set the selected item.
5When you finish with the setting, 
press [SETUP] to exit.
1. Parental Lock (Default: All)
Set the Parental Lock level.
Change the...

Page 72

EN72
Set to “ON” to make the dynamic range narrower.
Select a setting using [U / D], then 
press [ENTER/OK].
Your setting is activated.
The Dynamic Range Control function is effective 
only with analogue audio connection. 
Note
• The Dynamic Range Control function is available 
only on discs recorded in the Dolby Digital format.
Select a setting using [U / D], then 
press [ENTER/OK].
Your setting is activated.
48kHz: If your amplifier / decoder is NOT compatible 
with 96 kHz PCM, select “48kHz”. Sound...

Page 73

EN73
Introduction ConnectionsBasic Setup Playback
EditingOthers Function Setup
Recording5. Subtitle Language (Default: OFF)
Set the Subtitle language.
Select a setting using [U / D], then 
press [ENTER/OK].
Your setting is activated.
If “Other” is selected, enter the 
appropriate 4-digit code using 
[the Number buttons].
Refer to “Language Code” on page 82.
When you finish entering the code, 
press [ENTER/OK]. 
Hint
• You can also change or switch off the subtitles on a 
DVD from the disc menu if it is...

Page 74

EN74
Display
1
In stop mode, press [SETUP]. Select 
“General Setting” using [U / D ], 
then press [ENTER/OK].
2Select “Display” using [ U / D ], then 
press [ENTER/OK].
3Select the desired item using 
[ U  / D ], then press [ENTER/OK].
4Refer to 1. and 2. on this page and 
set the selected item.
5When you finish with the setting, 
press [SETUP] to exit.
1. Screen Saver (Default: 10 minutes)
Set the screen saver time delay.
Select a setting using [U  / D ], then 
press [ENTER/OK].
Your setting is...

Page 75

EN75
Introduction ConnectionsBasic Setup Playback
EditingOthers Function Setup
Recording• When you set the “Video Out” setting, make sure 
that the AV1(TV) Scart socket is connected to your 
TV with Scart cable.
1Select the desired setting using 
[U / D], then press [ENTER/OK].
• If your TV is compatible with progressive scanning 
(576p/480p), connect the TV to the COMPONENT 
VIDEO OUTPUT jacks of this unit and select 
“Component Progressive (P)” and set your TV to the 
progressive scan mode.
• If your...

Page 76

EN76
HDMI
1
In stop mode, press [SETUP]. Select 
“General Setting” using [U / D], 
then press [ENTER/OK].
2Select “HDMI” using [U / D], then 
press [ENTER/OK].
3Select the desired item using 
[U / D], then press [ENTER/OK].
4Refer to 1. to 3. on this page and set 
the selected item.
5When you finish with the setting, 
press [SETUP] to exit.
1. Format (Default: RGB)
You can select the colour space for HDMI output.
Set the appropriate colour space for your display 
device.
Select a setting using [U / D],...

Page 77

EN77
Introduction ConnectionsBasic Setup Playback
EditingOthers Function Setup
Recording
Reset All
1
In stop mode, press [SETUP]. Select 
“General Setting” using [U / D], 
then press [ENTER/OK].
2Select “Reset All” using [U / D], 
then press [ENTER/OK].
3Select “Yes” using [U / D], then 
press [ENTER/OK].
“Are you sure?” will appear. Select “Yes” using 
[U / D], and then press [ENTER/OK].
4When you finish with the setting, 
press [SETUP] to exit.
Note
• The settings listed below will remain unchanged...

Page 78

EN78
Troubleshooting
Before requesting service for this unit, check the table below for a possible cause of the problem you are 
experiencing. Some simple checks or a minor adjustment by you may eliminate the problem and restore correct 
operation.
Others
DVD
SymptomRemedy
The power does not turn on. • Check the mains cable is connected securely.
• Check the breaker (in case of power failure).
There is no picture. • Check signal cables are connected securely.
• Check if a connecting cable is damaged.
•...

Page 79

EN79
Introduction ConnectionsBasic Setup Playback
EditingOthers Function Setup
RecordingDVD
SymptomRemedy
There is no picture. • If the Setup menu display appears, press [SETUP] or [RETURN/BACK] to 
turn off the display.
Picture noise appears. • The disc is dirty or flawed.
• If the unit is connected to your TV via a VCR, or if it is connected to a 
combination TV  /  VIDEO player, the copy-protection signal applied to some 
DVD programme could affect picture quality. Try connect the unit directly to...

Page 80

EN80
* If the above remedies do not solve the problem, please call an authorised service centre.HDMI
SymptomRemedy
No image from HDMI connection. • Check the HDMI connection. (Check the status of the HDMI related 
indications.)
• Check whether the connected monitor device or other device supports HDCP. 
(This unit will not output a video signal unless the other device supports 
HDCP.)
• Check the setting of HDMI.
• Check whether the output format of this unit (HDMI FORMAT) matches the 
supported input...
Start reading Toshiba D-r17dt User Manual

Related Manuals for Toshiba D-r17dt User Manual

All Toshiba manuals