Toshiba Bex4t1 User Manual

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.6 Printer Setting
 
E2-27 
2.6.7  Dump Mode Setting 
 
 
 
 
 
 
 
  In the Dump Mode, data in the receive buffer are printed.  Data are 
expressed in hexadecimal values.  Th
is operation allows verification of 
the programming commands or debug of the program.  
(1) BUFFER 
This parameter is to choose the receive buffer to dump.  
  • RS-232C  RS-232C receive buffer 
•  CENTRONICS  Centronics receive buffer 
•  LAN  Network I/F receive buffer 
•  BASIC1...

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.6 Printer Setting
 
E2-28 
2.6.7  Dump Mode Setting 
 (Cont.) 
 
 The data in the receive buffer is printed as follows.  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Receive Buffer Size 
Interface  203 dpi  305 dpi 
RS-232C  6MB (393216 lines)  6MB (393216 lines) 
Centronics  6MB (393216 lines)  6MB (393216 lines) 
LAN  6MB (393216 lines)  6MB (393216 lines) 
BASIC 1  8KB (512 lines)  8KB (512 lines) 
BASIC 2  8KB (512 lines)  8KB (512 lines) 
USB  6MB (393216 lines)  6MB...

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.6 Printer Setting
 
E2-29 
2.6.8 Logging 
 
 
 
 
 
 The Log menu allows saving print logs in a USB memory. 
 
(1) LOG 
 
•  PRINTER TO USB  Saves print logs in the USB memory. 
 
  A file is automatically created in the USB memory and named in the following format based on the printer model and saved date. 
 /ATA0/LOG/B-EX4T1_LOG_1007291030.TXT 
  (e.g. B-EX4T Type1, 10:30, July 29, 2010)  
 
 
 
 
USER SYSTEM MODE   
Z-MODE 
AUTO CALIB 
DUMP MODE 
LOG...

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.6 Printer Setting
 
E2-30 
2.6.9 System Mode 
 
 
 
 
 
 
 
 
 
 
 
 
How to enter the System Mode 
 
 
 
 
 
 
The System Mode consists of the following menus.  
DIAG. 
Used to check and print the printer system information and 
maintenance counter status. 
PARAMETER SET ( ⇒ Section 2.6.2 ) 
Used to set the parameters for each printer function. 
ADJUST SET ( ⇒ Section 2.9 ) 
Used to fine adjust the print position, cut position, print tone, etc.  
TEST PRINT...

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.6 Printer Setting
 
E2-31 
2.6.10 Interface Setting 
 
  The Interface menu allows configuring printer interface parameters.  
The following table shows the contents of the Interface menu. 
 
Contents of the Interface Menu  
Menu Sub menu  Parameter 
NETWORK LAN/WLAN Interface   SNMP 
   SETTING 
   BASIC INFORMATION 
   IP ADDRESS 
   GATEWAY ADDRESS 
   SUBNET MASK 
   SOCKET PORT 
   PORT NUMBER 
   DHCP 
    DHCP CLIENT ID 
    DHCP HOST NAME 
   WLAN...

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.6 Printer Setting
 
E2-32 
2.6.10 Interface Setting  (Cont.) 
 
 
2.6.10.1  Network Setting 
 
(1) LAN/WLAN 
 • OFF  LAN and Wireless LAN are disabled.  
•  ON (AUTO)  Automatically selected. 
•  ON (LAN)  LAN is enabled. 
•  ON (WLAN)  Wireless LAN is enabled. 
 
 
(2) SNMP 
 
• OFF  SNMP is disabled. 
•  ON  SNMP is enabled. 
 
 
(3) BASIC INFORMATION 
The following information is displayed.  
 
IP Address 
Gateway address 
Subnet mask 
Socket port status...

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.6 Printer Setting
 
E2-33 
2.6.10 Interface Setting  (Cont.) 
 
  (8) PORT NUMBER 
 
 
 
 
 
 
 
 
 
 
(9) DHCP 
 
• OFF  DHCP is disabled. 
•  ON  DHCP is enabled. 
 
 
(10) DHCP CLIENT ID 
 
• ASCII  DHCP client ID is entered with ASCII code.  → c  
•  HEX  DHCP client ID is entered with Hex. code.  → d  
  c  When ASCII is selected: 
  Enter 64 characters with ASCII code. 
  d  When HEX is selected: 
  Enter 64 characters with Hex. code. 
 
 
(11) DHCP...

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.6 Printer Setting
 
E2-34 
2.6.10 Interface Setting  (Cont.)
 
 
  (13) WLAN MODE 
This parameter is to choose the connection mode and authentication.  
 
ADHOC OPEN     OFF 
        WEP40 
        WEP104 
  SHAREDNot used   WEP40 
        WEP104 
INFRA OPEN     OFF 
        WEP40 
        WEP104 
  SHARED    WEP40 
        WEP104 
  802.1x OPEN TLS WEP40 
        WEP104 
      TTLS WEP40 
        WEP104 
      LEAP WEP40 
        WEP104 
      PEAP WEP40...

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.6 Printer Setting
 
E2-35 
2.6.10 Interface Setting  (Cont.)
 
 
 
 
  (14) DEFAULT KEY 
This parameter is to choose a WEP key.  
 
 
 
 
 
 
 
(15) 802.11b CHANNEL  This parameter is to choose a channel for 802.11b WLAN.  
 
 
 
 
 
 
 
(16) 802.11b BAUD  This parameter is to choose a baud rate for 802.11b WLAN.  
 
• 11M 
•  5.5M 
•  2M 
•  1M 
 
 
(17) 802.11g CHANNEL  This parameter is to choose a channel for 802.11g. WLAN.  
 
 
 
 
 
 
 
(18) 802.11g...

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.6 Printer Setting
 
E2-36 
2.6.10 Interface Setting  (Cont.) 
 
 
 
 
 
 
  (19) WLAN POWER SAVE 
This parameter is to choose whether to enable the power save function 
while WLAN communication.  
 
• OFF  Power save function is disabled.  
•  ON   Power save function is enabled. 
 
 
(20) WINS 
 
• OFF  WINS is disabled. 
•  ON (MANUAL)  WINS is enabled. (Manual) 
•  ON (DHCP)  WINS is enabled. (DHCP) 
 
 
(21) WINS ADDRESS 
The WINS address is displayed....