Toshiba 5 Disc Carousel Changer Manual

							21
Basic playback
Notes:
• Remove all the discs from the DVD video player before moving from one location to another location.
• Do not move the DVD video player during playback. Doing so may damage the disc.
• Use OPEN/CLOSE button to open and close the disc tray. Do not push the disc tray while it is moving. Doing so
may cause the DVD video player to malfunction.
• Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the DVD
video player to malfunction.
• In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-
screen menu may damage your television set, permanently etching that image onto its screen. To avoid this, be
sure to press STOP button on your remote control once the movie is completed.
To obtain a higher quality picture
Occasionally, some picture noise not usually visible during a normal broadcast may
appear on the TV screen while playing DVD video disc because the high resolution
pictures on these discs include a lot of information. While the amount of noise depends
on the TV you use with this DVD video player, you should generally reduce the
sharpness adjustment on your TV when viewing DVD video discs.
About DVDVCDCD
The DVDVCDCD icons on the heading bar show the playable discs for the
function described under that heading.
DVD: You can use this function with DVD video discs.VCD: You can use this function with VIDEO CDs.CD: You can use this function with audio CDs.
To pause playback (still mode)
Press PAUSE/STEP during playback.
To resume normal playback, press
the PLAY button.
• The sound is muted during still mode.
To stop playback
Press STOP.
To remove the disc
Press OPEN/CLOSE and DISC SKIP to revolve the tray
closewise.
Remove the disc after the disc tray
opens completely.
Be sure to press OPEN/CLOSE button to close the
disc tray after you remove the disc.
To turn the power off (To enter the standby mode)
Press ON/STANDBY to turn the ON/STANDBY indicator
to red.
Note
Be aware that this equipment is still powered even after the
ON/STANDBY indicator turns off (standby mode) by pressing
ON/STANDBY button. To disconnect this equipment
completely from the mains power, pull out the power plug
from the wall outlet.
About the screen saver
If you pause a picture of a DVD video disc and leave it still
for a long while, the screen saver of the DVD video player
automatically appears. To turn off the screen saver, press
PLAY button.
Automatic Power Off function
If the DVD video player is stopped, or the screen saver is
engaged for approximately 20 minutes, the DVD video
player will automatically turn itself off.
STOP
OPEN/CLOSE
1
/
ENTER PASUE/STEP STOP PLAY DISC SKIP 2, 4
PAUSE/STEP
DISC SKIP 
						

							22
Basic playback
Variable Speed Playback
You can play discs at various speeds, and
resume playback from the location where you
stopped playback.
Playing in fast reverse or fast forward directionsDVDVCDCD
Press REW or FF during playback.To resume normal playback
Press PLAY.
Notes
• The DVD video player mutes sound and subtitle during
reverse and forward scan of DVD video discs. However, the
DVD video player plays sound during fast forward or fast
reverse play of audio CDs.
• The playback speed may differ depending on the disc.
PAUSE/STEP PLAY
REW
FF
REW: Fast reverse playback
FF: Fast forward playback
Each time you press REW or FF button, the playback speed
changes.
Playing frame by frameDVDVCD
Press PAUSE/STEP during still playback.To resume normal playback
Press PLAY.
Note
The sound is muted during frame by frame playback.
Each time you press PAUSE/
STEP button, the picture
advances one frame.
PLAY
PLAYPAUSE/STEP
STOP
SLOW
REWFF 
						

							23
Basic playbackPlaying in slow-motionDVDVCD
Press SLOW during playback.To resume normal playback
Press PLAY.
Notes
• The sound is muted during slow-motion playback.
• Three speeds are available.
• You cannot use REW SLOW playback function in VIDEO CD.
Each time you
press SLOW button,
the slow-motion
speed changes.PLAYSLOWSLOW
1/2
Resuming playback from the same locationDVDVCDCD
1Press STOP at the location where you want
to interrupt playback.
The DVD video player resumes
playback from the lcoation where
you stopped playback.
2Press PLAY.
The DVD video player memorizes
the location where playback is
stopped.STOP
PLAY
To start playback from the beginning regardless of the
location where you stopped playback
1 Press STOP twice.
• If you want to return to the beginning of a DVD video disc,
open and close the disc tray once with OPEN/CLOSE
button before pressing PLAY button.
The DVD video player deletes the
memory of the location.
2 Press PLAY.
STOP
PLAY
Notes
• Resuming cannot function when:
- you change the parental lock setting  or select a
disc menu language 
.
- you open the disc tray.
- you disconnect the power plug of the DVD video player.
- you play a PBC-feature video CD while the PBC is on.
• There may be a difference in the location where
playback resumes depending on the disc.
• Settings you changed using the on-screen displays
while the DVD video player keeps a location in the
memory may function only after the memory is cleared.
DVDPlayback starts from the
beginning of the current title.
VCDPlayback starts from the
beginning of the disc.CD
44
41
1/2 1/41/8 
						

							24
Basic playback
Locating a Desired Section
Notes:
• The instructions above describe basic procedures
which may vary depending on the contents of the DVD
video disc. If different instructions appear on the TV
screen, follow these instructions.
• If you display the top menu during playback and press
TOP MENU button again without selecting any title,
the DVD video player may resume playback from the
point where you first pressed TOP MENU button
(depending on the actual DVD video disc.)
• This method of locating a title is available only on a
disc that contains a top menu.
• Instruction notes of discs may refer to the button that
displays the top menu as TITLE button.
Locating a title using the top menu
Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapter. VIDEO CDs and audio
CDs are divided into tracks. You can quickly locate any specific title, chapter, or track.
Chapter 1 Chapter 2 Chapter 1 Chapter 2 Chapter 3
Title 1Title 2 DVD video disc
Track 1Track 2
Track 3 Track 4 Track 5
VIDEO CD/audio CD
DVD
1Press TOP MENU during playback.
The top menu appears on the TV
screen.
e.g.
2Press /// to select the title you want.
3Press ENTER.
///
ENTER TOP MENU
TOP MENU
If the titles in the top menu are
assigned a number, you can directly
locate a specific title by pressing its
designated number with the number
buttons.
ENTER
CH+
CH
VOLVOL+
TITLE 1TITLE 2
TITLE 3TITLE 4
ENTER
CH+
CH
VOLVOL+
Playback starts from
chapter 1 of the selected
title. 
						

							25
Basic playbackLocating a desired section by entering the corresponding numberDVDVCDCD
1
Press SEARCH.
Press / to highlight the Title/Chapter or Track. If
you are using a VIDEO CD / audio CD, skip step 2.
Then at step 3, enter the number for the track you
want using the number buttons.
2Press / to select a section you want to locate.
3Press the number buttons to enter title, chapter
or track number.
Playback starts from the
selected section.
4Press ENTER.
Notes:
• Pressing CLEAR button resets the numbers. To clear
the display, press SEARCH button several times.
• This method of locating a title is available only on a
disc that contains title numbers.
SEARCH
///
ENTERSEARCH CLEARNumber buttons
Search
Time                  - - : - - : - -
Track                            - - -
Search
Time                  - - : - - : - -
Title / Chapter    - - - / - - -
e.g. When you want to locate a chapter.
Skipping to next/previous chapter or trackDVDVCDCD
Notes:
• Some titles may not display chapter numbers.
• If you press and hold 
 SKIP or SKIP  button on the
front panel during playback, the DVD video player
performs fast reverse or fast forward playback. You can
vary the speed by pressing the button repeatedly.
To locate chapters or tracks during fast reverse or fast
forward playback, first press PLAY button to resume normal
playback, then use 
 SKIP or SKIP  button.
Press  SKIP or SKIP  repeatedly to access
the chapter or track number you want.
Playback starts from the selected chapter or track.
To locate succeeding chapters or
tracks.
Playback starts from the beginning
of the current chapter or track.
When you press twice in quick
successions, playback starts from
the beginning of the preceding
chapter or track.
SKIP
SKIP
SKIP
ENTER
CH+
CH
VOLVOL+
e.g.
e.g.
ENTER
CH+
CH
VOLVOL+
ENTERVOLVOL+
CH+
CHSearch
Time                    - - : - - : - -
Title / Chapter     - - - / - - -
DVD
VCDCD 
						

							26
Advanced playback
Accessing a Specific Location Directly
You can access a specific location by entering its
corresponding time (hours, minutes, seconds).
1Press SEARCH.
Press  /  button to highlight the time
counter.
2Press the number buttons to enter the time.
3Press ENTER.
Playback starts from the
desired location.
Notes
• Some discs may not respond to this process.
• Some scenes may not be located precisely as you
specified.
• This method for accessing specific locations is available
only within the current title of the DVD video disc or
within the current track of the VIDEO CD / audio CD.
• You can move through the menu by pressing the 
,
, and  buttons.
Entering the time counter of the desired locationDVDVCDCD
SEARCH
Search
Time                  - - : - - : - -
Title / Chapter    - - - / - - -
e.g.
• The first number you entered represent hours.
• The second two numbers you entered represent
minutes.
• The third two numbers you entered represent
seconds.
• If you input a wrong number, press CLEAR.
2
3 CLEAR
1
///
To set and play favorite bookmark during playback
1 Press SERACH repeatedly until the display of Bookmark
appears, then press ENTER to mark the desired scene.
2Press  ENTER to play the favorite bookmark.
SEARCH
Notes
• This method for accessing specific locations is available
only within the current disc.
• Press DISC SKIP to change other disc, STOP or turn
off the DVD video player to clear the memory.
If you want to set other bookmark. Follow step 1 and
move through the menu by pressing the 
 or  button.
Search
Time                  - - : - - : - -
Track                            - - -
e.g.
e.g.DVD
VCDCD
Search
Time
Title / Chapter      - - - / - - -1 : 2 8 : 2 0
122
80
ENTER
CH+
CH
VOLVOL+
ENTER
CH+
CH
VOLVOL+
Press SEARCH again to remove this display
SEARCH
To cancel the bookmark
Follow step 1, then press CLEAR to cancel the
bookmark, move through the menu by pressing the 
or  button to cancel other bookmarks.
ENTER
CH+
CH
VOLVOL+
CLEAR
Bookmark
Bookmark
Bookmark1   1 : 28 : 20
2 - -  : - -  : - -
3 - -  : - -  : - - 
						

							27
Advanced playback
Playing in a Favorite Order
You can combine your favorite titles, chapters, or tracks and play
them in the order you determine. You can program up to 12 selections
into the memory. (Program playback)
Setting titles, chapters, or tracks in a favorite orderDVDVCDCD
To change the programmed selections
1 While the display appears on the TV screen, press
/// to move the highlighted bar to the item you
want to change.
2 Change the selection following the instructions in
step 2.
Notes
• Some discs may not permit program playback
operation.
• If you press REPEAT button during program playback,
the DVD video player repeats the current program
playback.
• If you press PROGRAM button while the display
appears on the TV screen, the display disappears.
• The programmed selections will be cleared when you
turn off the DVD video player.
22
CLEAR
1
1Insert a disc and press PROGRAM during
stop.
Each time you press /// button, the space
of 
 or  is highlighted in turn. Highlight
where you want to enter, then press the
corresponding number button.
To select another chapter in the same title, you do not
need to select the title number.
To select tracks from a VIDEO CD / audio CD in order,
press number buttons for the track.
2Select the items in the order you want by
pressing the number buttons, then ENTER for
each item.
The following display appears.
e.g.
3Press /// to move the highlighted bar to
Play Program, then press ENTER.
The DVD video player starts program
playback.
To cancel the programmed selections
1 Press the PROGRAM button, the display appears
on the TV screen, press 
/// to move the
highlighted bar to the item you want to cancel.
2 Press CLEAR.
To resume normal playback from program playback
Press PROGRAM button and press 
/// to move
the highlighted bar to the Clear All, then press ENTER.
All the input programmes will be cleared. Press PLAY
button to resume normal playback.
Normal playback will start from
first location.
To program during playback
If you press PROGRAM button during playback, a
programming display appears.
Follow steps 2 and 3.
Program Input Title/Chapter
2  - -  - -   5  - -  - -  8  - -  - -  11  - -  - -
3  - -  - -   6  - -  - -  9  - -  - -  12  - -  - -
Play Program     Clear All
1  - -  - -   4  - -  - -  7  - -  - -  10  - -  - -
///
PROGRAM
Title number
- - - -
Chapter number
PROGRAM
- - -
Track number
Program Input
2  - - -       5  - - -      8  - - -     11  - - -
3  - - -       6  - - -      9  - - -     12  - - -
Play Program     Clear All
1  - - -       4  - - -      7  - - -     10  - - -
PLAY
CH+
CH
VOLVOL+ENTER 
						

							28
Advanced playback
Playing Repeatedly
You can play a specific title, chapter, track, or segment repectedly.
(Title repeat, chapter/track repeat, A-B repeat)
A-B REPEAT
REPEAT
Repeating a specific segment
1Press A-B REPEAT at the beginning of the
segment (point A) you want to play repeatedly.
2Press A-B REPEAT again at the end of the
segment (point B).
The DVD video player automatically
returns to point A and starts repeat
playback of the selected segment (
Rep A-
B).
To resume normal playback.
Press  A-B REPEAT repeatedly until the word “Rep Off”
is displayed.
A-B REPEAT
A-B REPEATRep A-50:38:2000:46:23
Rep A-B50:38:2001:03:18
A-B REPEAT
DVDVCDCD
Notes
• Some discs may not permit A-B repeat operation.
• You cannot set the A-B repeat function for a segment that
includes multiple camera angles 
.
• You can specify a segment only within the current title or track
(VIDEO CD).
• There may be a slight difference between point A and the
location where playback actually resumes depending on the
disc.33
Repeating a title, chapter or trackDVDVCDCD
The DVD video player starts in the selected mode
within about 5 seconds after you select.To resume normal playback
Press REPEAT until the “
Off” is displayed.1Press REPEAT repeatedly to select desired
repeat during playback.
Each time you press REPEAT button, the
playback mode changes as follows.
Resumes normal playback.
Repeats the current chapter.
Repeats the current title.
Repeats a current track
Repeats the entire disc.
Repeats all discs.
REPEAT
Repeat Chapter
Off
Repeat Chapter
Repeat Title
Rpt One Track
Rpt One Disc
Repeat AllDVDVCDCD
DV D
DV D
VCDCD
VCDCD
CD
Notes
• Some discs may not permit these operations.
• Repeat is prohibited when PBC is on.
20 
						

							29
Advanced playback
You can play titles, chapters or tracks in random order.
(Random playback)
Playing in Random Order
Playing titles, chapters or tracks in random order
1Press RANDOM repeatedly to select the
random  playback mode.
The DVD video player starts
random playback within about 5
seconds after you press
RANDOM button.RANDOMRANDOM
To resume normal playback.
Press  RANDOM repeatedly until the word “Random Off ” is
displayed.
Notes
• Some discs may not permit random playback operation.
• You cannot use the random playback function in conjunction
with the program playback function.
• Random 3 is not applicable in DVD discs.
RANDOM
DVDVCDCD
Random Off
Random 1
Random 2
Random 3
VCDCD
If you press REPEAT in random on mode, the
DVD player automatically starts random playback
after finishing the current title, chapter or track.
The mode changes same as “Repeating title, chapter
or track” 
.28
Resumes normal playback.
Plays single disc in random order.
Plays all discs in random order.
a ) Plays 3 tracks randomly from
a disc.
b ) Plays 3 tracks randomly from
a different disc until all discs
have been played.
c ) Repeat (b) until all discs have
been accessed twice.
The mode changes as follows
(when using the RANDOM
button):
DVDVCDCD 
						

							30
Advanced playback
On-screen display operation
When you turn on the on-screen display, you can view information on
operational status and access features and settings.
On-screen Display Operation
DVDVCDCD
e.g. While a DVD video disc is playing. Press DISPLAY during playback.
The following display appears.
Elapsed time: Elapsed time from the beginning
of the chapter which is currently playing.
Remaining time: Remaining time of the title
which is currently playing.
DISPLAY•
Elapsed Time
Remaining Time
The following display  appears when press
DISPLAY again.
Press ANGLE, AUDIO or SUBTITLE to change
the current settings, then press ENTER to confirm.Features
After settings, press DISPLAY again to return to
the normal screen.
ENTER DISPLAY
SUBTITLE
AUDIO
///
ANGLE
Title number
• The number of the title currently playing and total titles
of disc.
Chapter number
• The number of the chapter currently playing and total
chapters of the currently played title.
Time counter
• Elapsed time from the beginning of the currently playing
chapter and the remaining time from the beginning of
the currently playing title.
Angle setting 
• The current angle is displayed. When a disc with only
one angle is played back, “
Angle 1/1” is displayed.
• Press the ANGLE button to select the desired angle.
Audio setting 
• The type of audio currently selected is displayed.
• Press the AUDIO button to select your desired type of
audio.
Subtitle setting 
• The subtitle number and language currently selected is
displayed. When a disc with only one subtitle is played back,
“
1/1 Eng” is displayed.
• Press the SUBTITLE button to select your desired language.
Bit Rate (Mbit/s)
• Amount of picture, sound and subtitle data in DVD video disc
transferred per second. The larger the value is, the more data
processed, but this does not necessarily insure better picture
quality.
Note
DISPLAY is prohibited during MP3 / WMA playback.
33
32 31
DVD                             00:09:29     01:25: 27
Title  1/10     Chapter   3/15         Angle 1/3
Audio
Subtitle
2/3 SpaBitrate 5.888Mbpss
Angle
setting ChapterTime
Audio
setting
Subtitle
setting
Title
Bit Rate