Toshiba 5 Disc Carousel Changer Manual

11
Introduction
TOTAL TITLECHP TRKA - B
DVD display
When you start playback, the elapsed time indicators appear. Pressing the FL. SELECT button switches them
to the title/chapter/track number indicators. Some discs may not permit this operation.
Play mode indicator
Total playing
time indicatorChapter number
indicator
Track number
indicatorMemory playback indicator
Random playback indicator
DVD / VIDEO CD /
CD indicatorMultifunctional indicator (indicates
operating status or messages, etc.)Angle icon...

12
Introduction
1
4
72
5
8
03
6
9



DV D
OPEN/CLOSE
PROG RESSIVE
CLEAR
SEARCH
ZOOM
DISC SKIP DISPLAY
TOP MEN U
ANGLE
SKIP
A-B REPEAT
PLAY
REW
STOP
FL. DIM
SET UP
ENTER
SLOW SLOW
FL. SELECTRETURNCH
+
CH
MENU
SUBTITLEREPEAT
AUD IO






INPUT SELECT
FF
POWER
100
RAN DOM
PAUSE/STEP
PROGRAM
VO L
VOL+
TV

Identification of Controls (continued)
The instruction in this manual describe the functions on the remote control. See the page in  for details.
Remote Control
POWER button20
OPEN/CLOSE button...

13
IntroductionLoading batteries
Open the cover.
Operating with the remote control
1
Insert batteries (AAA size).2
Close the cover.3
Make sure to match the + and  on the batteries
to the marks inside the battery compartment.
Notes on batteries
Improper use of batteries may cause battery leakage and
corrosion. To operate the remote control correctly, follow the
instructions below.
 Do not insert batteries into the remote control in the wrong
direction.
 Do not charge, heat, open, or short-circuit the...

14
Connections
COAXIAL
Connecting to a TV
Notes:
• Refer to the owner’s manual of the connected TV as well.
• When you connect the DVD video player to your TV, be sure to turn off the power and unplug both units from the
wall outlet before making any connections.
• If your television set has one audio input, connect the left and right audio outputs of the DVD video player to a Y
cable adapter (not supplied) and then connect to your TV.
• Connect the DVD video player directly to your TV. If you connect...

15
Connections
COAXIAL
Interlaced outputs/inputs (ColorStream®)Some TVs or monitors are equipped with component video inputs.
Connecting to these inputs allows you to enjoy higher quality picture
playback.
Actual labels for component video inputs may vary depending on the
TV manufacturer. (ex. Y, R-Y, B-Y or Y, C
B, CR)
In some TVs or monitors, the color levels of the playback picture may
be reduced slightly or the tint may change. In such a  case, adjust the
TV or monitor for optimum performance....

16
Connections
Connecting to Optional Equipment
You can enjoy high quality dynamic sounds by connecting the DVD video player to
optional audio equipment.
• For connection to your TV, see “Connecting to a TV”
...................
• For details of output sound, see         .
• This section uses the following reference marks.
1514
31
: Rear speaker
: Front speaker
: Sub woofer
: Center Speaker
: Signal flow
Notes:
• DO NOT connect the COAXIAL DIGITAL AUDIO OUT
jack of the DVD video player to the AC-3 RF...

17
Connections
COAXIAL*
COAXIAL
Connecting to an amplifier equipped with a Dolby Digital decoder
Dolby Digital
Dolby Digital is the surround sound technology used in theaters showing the
latest movies, and is now available to reproduce this realistic effect in the
home. You can enjoy motion picture and live concert DVD video discs with this
dynamic realistic sound by connecting the DVD video player to a 6 channel
amplifier equipped with a Dolby Digital decoder or Dolby Digital processor. If
you have a...

18
Connections
COAXIAL
COAXIAL
Connecting to Optional Equipment (Continued)
Connecting to an amplifier equipped with a DTS decoder
Digital Theater Systems (DTS)
DTS is a high quality surround technology used in theaters and now
available for home use, on DVD video discs or audio CDs.
If you have a DTS decoder or processor, you can obtain the full benefit of
5.1 channel DTS encoded sound tracks on DVD video discs or audio
CDs.“DTS” and “DTS Digital Out” are
trademarks of Digital Theater Systems,
Inc.
•...

19
Connections
COAXIAL
Connecting to an amplifier equipped with a digital audio input
2 channel digital stereo
You can enjoy the dynamic sound of 2 channel digital stereo by
connecting an amplifier equipped with a digital audio input and speaker
system (right and left front speakers).
Amplifier equipped with a
digital audio input
To COAXIAL type
digital audio input
75 W coaxial cable
• Make the following setting.
On-screen displaySelectPage
“Digital Out”
“PCM”
38
43
To COAXIAL
DIGITAL
AUDIO OUT 

20
Basic playback
Playing a Disc
This section shows you the basic on how to play
a disc.
CAUTION
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
SKIP PAUSE STOP PLAY MENU
ENTER OPEN/CLOSE DISC SKIP
ON/STANDYBY indicator
2
12, 43
PAUSE
MENU/ENTERSTOP
PLAY
Preparations
• When you want to view a disc, turn on the TV and select the video input connected to the DVD video player.
• When you want to enjoy the sound of discs from the audio...