Tone Commander 6001ta Terminal Adapter Installation Instructions

13-102862  Rev. E
October 2003
The Model 6001 Terminal Adapter allows a Tone Commander 6210 or 6220 ISDN telephone to be controlled by a
TAPI-compliant Windows computer application program. Adapter circuitry is housed in a telephone base that
replaces the standard base. An RS-232 serial port on the base connects to the computers com port.
Telephone operating software must be version 01.03.02 or higher to enable the TAPI features. To view the
installed software version, select VERS, then S/W from the...

Page 2Tone Commander 6001TA Terminal Adapter
Telephone – Computer Serial Connection
1.  Plug the supplied serial cable (standard straight-through modem cable) into the connector on the telephone
base.
2.  Plug the other end of the cable into the serial port that will be selected during the TSPI driver installation. If
the computer has a 25-pin serial connector, you will need to obtain a DB9-DB25 adapter.
TSPI Driver Installation
The following instructions apply to TSPI installer version 01.01.05 and...

Tone Commander 6001TA Terminal AdapterPage 3
4. Click The Finish button. Your computer will restart.
Feature Activator Configuration
Repeat these steps whenever the phones feature activators have changed.
1.  Open, then close your TAPI application. This will send the phones feature activator assignments to the
TSPI driver. You may need to select the 6200 series TAPI service provider driver from within the
application.
Windows XP / 2000:
2.  From the Start Menu, select Control Panel.
3. Double-click the...

Page 4Tone Commander 6001TA Terminal Adapter
5.  Select TAPI Service Provider: 6200 series, then click the Configure… button.
Windows Me / 98 / 95:
2.  From the Start Menu, select Settings - Control Panel.
3. Double-click the Telephony icon. You may need to enter your area code before proceeding.
NOTE – If you are running Windows 95 and do not see a Telephony icon in Control Panel, close Control
Panel. Find the file telephon.cp$ in the Windows\System folder, and rename it to telephon.cpl.
You may need to...

Tone Commander 6001TA Terminal AdapterPage 5
All Windows Versions:
6.  In the TCS Config window, click the Features tab.
7.  The drop-down lists will contain all Feature Activators currently loaded in the phone. The software will
attempt to select the correct Feature Activator for each feature. Check the entry for each feature, and
select the appropriate Feature Activator from the drop-down list if necessary.
8. Click the OK button.
9.  Close the Phone and Modem Options (or Dialing Properties / Telephony...

Page 6Tone Commander 6001TA Terminal Adapter
Service
Repair of the 6001TA  must be done by Tone Commander. Prior to equipment removal, call Tone Commander
Customer Technical Support for assistance in determining the source of the problem. This critical action can often
prevent needless removal of equipment and subsequent customer inconvenience.
Tone Commander
Technical Support Department
11609 49th Place West
Mukilteo, WA  98275-4255  USA
Phone: (425) 349-1000
(800) 524-0024
Fax: (425) 349-1010
E-mail:...