TomTom Urban Rider 3 Manual

TomTom Urban Rider
TomTom Rider Pro 

What’s in the box1.
2
What’s 
in the 
box
* Not included in all products.AYour TomTom RIDER
1. Touchscreen
2. On/Off button
3. Charging light
4. USB connector
BHolderCRAM Mount™ mounting kit
DHome ChargerEUSB cable
FDocumentation packGCardo scala-rider™ Bluetooth® head-
set*
1
2
3
4 

Using your TomTom Rider2.
3
Using 
your 
TomTo
m RiderSwitching on
Press and hold the On/Off button for 2 seconds, or until your TomTom Rider starts.
The first time you switch on your TomTom Rider, it may take up to 20 seconds to start. To 
switch off your TomTom Rider, press and hold the On/Off button for 2 seconds.
Before you use your Rider for the first time, it’s a good idea to charge it fully. 
The battery in your TomTom Rider navigation device charges when you connect it to the 
home charger or to...

4
• Always use the correct tools. If you use unsuitable tools, you may damage or break the 
mount kit.
• Do not overtighten nuts. You may crack parts of the mount kit or damage your handle-
bars if you overtighten the nuts.
• If you are using the u-bolt, don’t forget to put the rubber caps provided over the 
exposed threads.
Damage due to modifications, improper installation, road hazards or accident, are not cov-
ered. Neither RAM nor TomTom shall be liable for any injury, loss, or damage, direct or...

5
6. Volume up
7. Charging connector
Before you can use your Bluetooth headset, fully charge the headset using the charger 
supplied with the headset.
To fully charge the headset takes between 2 and 3 hours. When charging, the LED is a 
steady red. When charging is finished, the LED turns off.
When the batteries are running low, an alert tone is played. 

Driving View3.
6
Driving 
View
1. Tap this button to zoom in and out. 
When tapped, large + and - buttons appear for easy use when wearing gloves.
2. Quick Menu.
Tip: When you see this symbol in the guide, it means that this is an option that can 
be added to your Quick Menu for easy access. For more information, see Quick 
Menu in this guide.
3. Your current position.
4. The name of the next major road or road sign information, if applicable.
5. Battery level indicator.
6. Your speed and the speed...

Main Menu4.
7
Main 
MenuThe Main Menu is the starting point for planning a route, looking at a map or changing 
your device settings.
To open the Main Menu from the Driving View, tap the centre of the screen.
To return to the Driving View from the Main Menu, tap done.
Main Menu buttons
The following buttons are shown on the Main Menu.
Plan route
Tap this button to plan a new route.
This button is shown when you have not planned a route.
Change route
Tap this button to change the existing route or to plan...

8
sound
Tap this button to turn the sound on.
Options
options
Tap this button to adjust the settings for your device.
For more information, see the chapter Options. 

Quick Menu5.
9
Quick 
MenuAbout the Quick Menu
The Quick Menu offers a fast and safe way to use your TomTom Rider. 
When you use the Quick Menu, the number of taps you need to make is reduced and this 
makes the device easier to use with gloves.
There are over twenty Quick Menu items to choose from. You can choose just one or sev-
eral depending on the features you use the most.
Tip: When you see this symbol in the guide, it means that this is an option that can 
be added to your Quick Menu for easy...

Planning a route6.
10
Plan-
ning a 
route1. Tap the screen to open the Main Menu.
2. Tap Plan route.
You can enter an address in various ways, but we will enter the full address.
3. Tap Address. Then tap Street and house number.
4. Start to type the name of the town where your journey will begin and tap on the name 
when it appears in the list.
Tip: When you plan a route for the first time you are asked to select the country or state. 
Your choice is saved and used for all future routes. You can change...