TomTom Start 50 User Manual

							71 
 
 
 
Note: If you want to report a map change of a type not shown in the menu, use the Map Share 
Reporter at tomtom.com. 
7. Follow the instructions for your chosen type of map change. 
8. Select Report. 
The marker for the marked location is removed from the map. 
9. Connect your START to MyDrive Connect to send your map change report to TomTom and 
receive map changes from other TomTom users.  
Types of map change 
There are several types of map change available. 
Note: If you want to report a map change of a type not described below, use the Map Share 
Reporter at tomtom.com. 
For all map changes described below, you need to connect your START to MyDrive Connect to send 
your map changes report to TomTom and receive map changes from other TomTom users. 
Road Restriction 
Select this option to block or unblock a road. You can block or unblock the road in one or both 
directions by doing the following: 
1. Press and hold to select the location of the map change on the map view. 
2. Select the pop-up menu button to open the menu. 
3. Select Report Map Error from the pop-up menu. 
4. Select Road Restriction. 
Select the road sign at either end of the road to change it from open to closed or vice versa. 
 
5. Select Report. 
Street Name 
Select this option to correct an incorrect street name. 
1. Press and hold to select the location of the map change on the map view. 
2. Select the pop-up menu button to open the menu. 
3. Select Report Map Error from the pop-up menu. 
4. Select Street Name. 
5. Enter the correct street name. 
6. Select Report.  
						

							72 
 
 
 
Turn Restriction 
Select this option to report incorrect road turn restrictions. 
1. Press and hold to select the location of the map change on the map view. 
2. Select the pop-up menu button to open the menu. 
3. Select Report Map Error from the pop-up menu. 
4. Select Turn Restriction. 
5. If the incorrect junction is shown, select Select another junction.  
6. Select the approach direction. 
The map rotates so that the direction you are coming from is shown at the bottom of the 
screen. 
7. Select the traffic signs in turn to change the turn restrictions for each road at the junction. 
 
8. Select Report. 
Speed Limit 
Select this option to correct the speed limit on the map.  
1. Press and hold to select the location of the map change on the map view. 
2. Select the pop-up menu button to open the menu. 
3. Select Report Map Error from the pop-up menu. 
4. Select Speed Limit. 
5. Select the correct speed limit.  
If the correct limit is not shown, scroll left or right through the available speed limits.  
6. Select Report.  
						

							73 
 
 
 
About RDS-TMC 
The Traffic Message Channel (TMC), also known as RDS-TMC, transmits traffic information as a radio 
signal and is available free of charge in many countries. 
TMC is not a TomTom service, but is available when using the TomTom RDS-TMC Traffic Receiver. 
Note: TMC is not available in all countries. To check the availability of TMC services in your 
country, go to tomtom.com/5826. 
TomTom is not responsible for the availability or quality of traffic information provided by TMC. 
 
The route bar 
The route bar is shown when you have planned a route. It has an arrival information panel at the 
top, and a bar with symbols underneath. 
Important: To see a wider route bar showing additional route information, change the setting for 
Route Information.  
Note: The distance ahead shown by the route bar depends on the overall length of your route. 
 
 
 
The arrival information panel shows the following information: 
 The estimated time that you will arrive at your destination. 
 The length of time to drive to the destination from your current 
location. 
 A parking button is shown near the destination flag when parking is 
available near your destination. 
Tip: If your destination is in a different time zone, you see a plus 
(+) or a minus (-) sign and the time difference in hours and half 
hours in the arrival information panel. The estimated time of arrival 
is the local time at your destination. 
If you have stops on your route, select this panel to change between 
information about the next stop and your final destination. 
You can choose the information you see on the arrival information panel. 
Traffic status - if your START isnt receiving any traffic information, a 
symbol showing traffic with a cross appears underneath the arrival 
information panel. 
The bar uses symbols to show the following information: 
 The next two stops on your route. 
Tip: To quickly remove a stop, select it in the route bar and use the 
menu. 
 Petrol stations that are directly on your route. 
 RDS-TMC Traffic including heavy rain or snow. 
 TomTom Speed Cameras and Danger Zones. 
 Rest stops directly on your route. 
You can choose the information you see on your route. 
Traffic  
						

							74 
 
 
 
The symbols are in the order that they occur on your route. For traffic 
incidents, the symbol for each incident alternates between showing the 
type of incident and the delay in minutes. Select a symbol to see more 
information about a stop, an incident or a speed camera. If a symbol is 
shown on top of another symbol, selecting the symbols zooms in on the 
route bar to show each symbol separately. You can then select a symbol. 
The total time delay due to traffic jams, weather, and other incidents on 
your route, including information provided by IQ Routes, is shown above 
the symbols. 
For a complete list of incident types, see Traffic incidents. 
The bottom of the route bar represents your current location and shows 
the distance to the next incident on your route. In addition, you can 
choose to see the current time if you switch the setting on. 
Note: To make the route bar more readable some incidents may not be shown. These incidents 
will always be of minor importance and only cause short delays. 
The route bar also shows status messages, for example Finding fastest route or Playing route 
preview.  
Looking at traffic on the map 
Traffic incidents are shown on the map. If several traffic incidents overlap the highest priority 
incident is shown - for example, a road closure is higher priority than road works or a closed lane. 
Tip: Select an incident on the map to see more detailed information. 
 
1. Traffic incident that affects your route in your direction of travel. 
A symbol or number at the start of the incident shows the type of incident or the delay in 
minutes, for example 5 minutes.   
						

							75 
 
 
 
The colour of the incident indicates the speed of traffic relative to the maximum allowed speed 
at that location, with red being the slowest. The stripes on the traffic jam are also animated to 
show the speed of the traffic, where appropriate.  
For a complete list of incident types, see Traffic incidents. 
Tip: You see weather symbols on the map if there is bad weather such as heavy rain or snow.    
2. Traffic incident on your route but in the opposite direction of travel. 
3. Traffic incidents on roads that are not visible at your current zoom level.  
Looking at traffic on your route 
Information about traffic incidents on your route is shown in the route bar on the right-hand side of 
the map. 
The route bar tells you about traffic delays while you are driving, using symbols to show you where 
each traffic incident is located on your route. 
Note: If your START isnt receiving any traffic information, a symbol showing traffic with a cross 
appears underneath the arrival information panel. 
Note: To make the route bar more readable some incidents may not be shown. These incidents 
will always be of minor importance and only cause short delays. 
To get more information about an incident, select an incident in the route bar. The map opens 
zoomed in on the incident and an information panel opens showing detailed information about the 
traffic incident. 
 
The information shown includes: 
 The type of traffic incident - general, accident, road works, lane closure or weather such as 
heavy rain or snow.  
 The severity of the incident - slow traffic, queuing traffic or stationary traffic.  
 The delay time. 
 The length of the incident.  
For a complete list of incident types, see Traffic incidents. 
Select the back button to go back to the guidance view.  
Traffic incidents 
Traffic incidents and weather warnings are shown in the map view and in the route bar. 
Traffic incident symbols: 
 
Stationary traffic 
 
Queuing traffic  
						

							76 
 
 
 
 
Slow traffic 
 
Unknown accident 
 
Unknown incident 
 
Roadworks 
 
Lane closure 
 
Road closure 
Weather symbols: 
 Wind 
 Rain 
 Fog 
 Snow 
 Ice 
 
Approaching a traffic jam warning 
A warning is given as you approach a traffic jam. You are warned in several ways:  
						

							77 
 
 
 
 
 
 
 A warning symbol is shown in the route bar. 
 The route bar zooms in to the start of the traffic jam. 
 Your distance to the start of the traffic jam is shown in the route bar. 
 The colour of the road on the route bar changes to orange or red, 
depending on the severity of the traffic jam. 
 The background colour of the route bar background changes to red if 
you are driving too fast towards the traffic jam. 
 You hear a warning sound. 
To change the way you are warned, select Sounds & Warnings in the Settings menu.  
Avoiding a traffic jam on your route 
You can avoid a traffic jam that is on your route. 
Note: Sometimes the quickest route is still the route that has the traffic jam. 
Note: It may not be possible to find an alternative route around the traffic jam if none exists. 
Avoiding a traffic jam using the route bar 
1. In the route bar, select the symbol for the traffic jam you want to avoid. 
The traffic jam is shown on the map. 
2. Select the pop-up menu button. 
 
3. Select Avoid in the pop-up menu. 
A new route is found that avoids the traffic jam. 
Avoiding a traffic jam using the map 
1. On the map view, zoom in and select the traffic jam that is on your route. 
The traffic jam with an information panel is shown on the map. 
2. Select the pop-up menu button. 
 
3. Select Avoid. 
A new route is found that avoids the traffic jam.  
Advanced Lane Guidance 
Note: Lane guidance is not available for all junctions or in all countries. 
Advanced Lane Guidance helps you prepare for motorway exits and junctions by showing the correct 
driving lane for your planned route.  
						

							78 
 
 
 
As you approach an exit or junction, the lane you need is shown on the screen and in the instruction 
panel. 
 
 
Tip: To close the lane image, select anywhere on the screen. 
To turn lane images off, select the Settings button in the Main Menu, then select Appearance. 
Switch off the Show previews of motorway exits setting.  
Time-dependent speed limits 
Some speed limits change depending on the time of day. For example, you may see the speed limit 
near schools decrease to 40 km/h or 25 mph in the morning between 08.00 - 09.00 and in the 
afternoon between 15.00 - 16.00. Where possible, the speed limit shown in the speed panel changes 
to show these variable speed limits. 
Some speed limits change depending on driving conditions. For example, the speed limit will 
decrease if there is heavy traffic, or the weather conditions are bad. These variable speed limits are 
not shown in the speed panel. The speed shown in the speed panel is the maximum speed limit 
allowed in good driving conditions. 
Important: The speed limit shown in the speed panel is only an indication. You must always obey 
the actual speed limit for the road you are on and the conditions you are driving in.  
						

							79 
 
 
 
About speed cameras 
The Speed Cameras service warns you about the following camera locations: 
 Fixed speed camera locations. 
 Average speed camera locations. 
 Speed enforcement zones. 
 Red light camera locations. 
 Traffic restriction cameras. 
The Speed Cameras service also warns you about the following safety hazards: 
 Accident blackspot locations. 
Note: Your new TomTom START comes pre-loaded with speed camera locations. To keep these 
camera and hazard locations up-to-date, connect your START to TomTom MyDrive frequently. 
 
Crossing into another area or country 
When you drive into an area or country that does not permit speed camera warnings, your START 
switches the speed cameras service off. You will not receive speed cameras warnings in those areas 
or countries. 
Some areas or countries permit limited speed camera warnings, for example only warnings for fixed 
cameras, or warnings for risk zones. Your START automatically switches to give limited warnings 
when you cross into those areas or countries.  
Speed camera warnings 
When you first start using your device, a warning sound is played for the most common types of 
speed camera. To change the way you are warned about speed cameras, select Sounds & Warnings 
in the Settings Menu. 
Warnings are given as you approach a speed camera. You are warned in several ways: 
 A symbol is shown in the route bar and on your route on the map. 
 Your distance to the speed camera is shown in the route bar. 
 You hear a warning sound as you get near the camera. 
 While you are approaching a camera or driving in an average speed check area, your speed is 
monitored. If you drive more than 5 km/h or 3 mph over the speed limit the route bar turns red. 
If you drive less than 5 km/h or 3 mph over the speed limit the route bar turns orange. 
Tip: In the map view or guidance view, you can select a speed camera symbol in the route bar to 
see the type of camera, the maximum speed and also the length of an average speed check area. 
In the map view, you can also select a speed camera that is shown on your route. 
Symbol shown on 
map 
Symbol shown in 
route bar 
Description 
   
Fixed speed camera - this type of camera 
checks the speed of passing vehicles and is fixed 
in one place. 
Speed Cameras  
						

							80 
 
 
 
Symbol shown on 
map 
Symbol shown in 
route bar 
Description 
   
Average speed cameras - these types of 
cameras measure your average speed between 
two points. You are warned at the start and end 
of the average speed check area. 
While you are driving in an average speed check 
area, your average speed is shown, instead of 
your current speed. The distance to the end of 
the area is shown in the route bar. 
   
Speed enforcement zones - these zones can 
contain multiple speed cameras.  
You are warned at the start and end of a speed 
enforcement zone. While you are driving in a 
speed enforcement zone, your current speed is 
shown, and the visual warning is shown in the 
route bar. 
  
 
Red light camera - this type of camera checks 
for vehicles breaking traffic rules at traffic 
lights. There are two types of traffic light 
camera - those which check if you drive through 
a red light and those which check for driving 
through a red light together with speeding. 
   
Traffic restriction - this type of warning warns 
you about restricted roads. 
   
Accident blackspot - this type of warning is 
given for a place where road traffic accidents 
have historically been concentrated.  
You are warned at the start and end of the 
accident blackspot. While you are driving in an 
accident blackspot, your current speed is shown. 
When you are in the blackspot, the visual 
warning continues to be shown in the route bar. 
   
Traffic jams - warnings are given in the route 
bar for traffic jams. 
 
Changing the way you are warned 
To change the way you are warned about speed cameras, select the Sounds and Warnings button in 
the Settings menu. 
 
You can then set how you want to be warned for the different types of cameras and safety hazards. 
You can change settings for whether you want to be warned, never warned or warned only if you 
are speeding.