TomTom Spark 3 User Guide

11 
 
 
 
1. Slide the handlebar strap into the hook at the back of the watch holder. Choose the right length for 
the size of your handlebars. 
 
 
Tip: The strap has two holes so that it fits a range of different sizes of handlebars from 22 mm to 
32 mm. Select the hole that fits your handlebars best.  

12 
 
 
 
2. Place the watch holder on your handlebar and wrap the strap around the bar. 
 
3. Use the clip on the bottom of the holder to attach the handlebar strap.  
The strap should now be attached securely around the handlebar. 
  

13 
 
 
 
4. Remove your watch from the wrist strap. Open the holder by pressing as shown below. Lift the 
cover. 
 
5. Slide your watch into the holder as shown.  
 
6. Make sure your watch clicks securely into place.   

14 
 
 
 
7. Close the holder over the top of the watch, ensuring that it clicks as you close it. You are now 
ready to go cycling! 
 
 
Removing your watch from the holder 
You may want to remove your watch from the holder in order to charge it or while attaching the bike 
mount to your handlebars. 
To remove the watch from the holder, do the following: 
1. Open the holder by pressing as shown below and then lift the cover. 
 
2. Push the watch back towards you to unlock it from the holder.  

15 
 
 
 
3. Slide the watch out towards you into the palm of your hand.  
Using an O-ring 
If you lose your bike mount strap, you can use a standard O-ring to mount your watch on your 
handlebars.  
To use an O-ring, do the following: 
1. Turn the watch over and insert the O-ring in the hook nearest the front of the watch. 
 
2. Find a piece of rubber, for example, a piece of an old bicycle inner tube. This is needed to sit 
between the mount and handle bars and prevents slipping. 
3. Place the mount...

16 
 
 
 
 
 
 
 
About screen 
From the clock screen, press DOWN. Press UP until you see ABOUT at the top of the menu. Press 
RIGHT to open the About screen. 
The About screen shows the following information: 
 BATTERY - the battery power left on your watch.  
To charge the battery, place the watch in the desk dock and connect the dock to your computer. 
 STORAGE - the amount of space used up on your watch.  
If you are running out of space, connect your watch to your computer. TomTom Sports Connect...

17 
 
 
 
Performing a reset 
Soft reset 
A soft reset is performed each time you disconnect your watch from a wall charger or computer. 
To perform a soft reset on your watch, follow these steps: 
1. Connect your watch to a wall charger or computer. 
Wait until your watch shows a battery symbol. 
If you are using a computer, wait until Sports Connect finishes updating your watch. 
2. Disconnect your watch from the wall charger or computer. 
The software on your watch restarts. This performs a soft reset...

18 
 
 
 
Before you start training, its a good idea to charge your watch, download any software updates, your 
personalised workouts and download QuickGPSfix.  
Note: QuickGPSfix helps your watch get a GPS fix and find your location quickly. It also saves your 
battery and prolongs its life. 
1. Download TomTom Sports Connect from tomtom.com/123 and install it on your computer. 
TomTom Sports Connect is available for free. 
2. Place your watch in the desk dock and connect the dock to your computer....

19 
 
 
 
Pairing your watch with your mobile device 
To learn more, go to Pairing with your mobile device in this guide.  

20 
 
 
 
Pairing with an Android device 
The TomTom Sports mobile app allows you to automatically upload your sports activity data from your 
TomTom GPS Sports W atch to the TomTom Sports Cloud using your smartphone. It also allows 
automatic uploads to a number of other websites. In addition, the app downloads your personalised 
workouts, trails and QuickGPSfix data to your watch. 
To pair your Android™ device with your watch follow these steps: 
1. Make sure that your watch and Android device are...