TomTom Rider 410 400 40 User Manual

11 
 
 
 
 Do not overtighten nuts and screws. You may crack parts of the mount kit or damage your 
handlebars if you overtighten nuts or screws.  
 If you are using the u-bolt, don’t forget to put the rubber caps provided over the exposed 
threads.  
Important: Damage due to modifications, improper installation, road hazards or accident, are 
not covered. Neither RAM nor TomTom shall be liable for any injury, loss, or damage, direct or 
con-sequential, arising out of improper installation, or...

12 
 
 
 
 A RAM lock for the mount.  
This lock prevents the unscrewing of the RAM arm from the motorcycle.  
 A lock for the TomTom Rider itself.  
This lock prevents the disconnection of the TomTom Rider from the dock.  
Important: Both locks have keys so you need to make sure that you keep these two extra keys with 
you at all times!  
To use the anti-theft solution, do the following: 
1. Lock the RAM mount to your motorcycle as shown below. 
Note: Make sure you use the longer screws provided with...

13 
 
 
 
2. Lock your TomTom Rider to prevent removal from the mount. Unscrew the wingnut from the 
RAM arm and attach the RAM lock. 
 
  
Installing in your car 
If your box contains a car mount, use the supplied mount to install your TomTom Rider in your 
vehicle. Read the instructions about positioning your device before you install your Rider. 
 
If your box contains a car mount, install your Rider by doing the following: 
1. Connect the supplied USB cable to the mount.  
Note: Use ONLY the USB...

14 
 
 
 
5. Press the suction cup of the mount firmly against your windscreen.  
6. Turn the grip near the base of the mount in a clockwise direction until you feel it lock. 
7. Place your Rider in the mount, making sure that it clicks into place. 
Tip: With the High-Speed Dual Charger you can charge your TomTom Rider and smartphone at 
the same time. 
 
 
Bluetooth Connections 
Your TomTom Rider use Bluetooth to connect to your smartphone and headset. 
Select Settings in the Main Menu, then select...

15 
 
 
 
Hands-free calling 
Use hands-free calling to receive incoming calls using your device. Select Hands-free calling, then 
select Search for phone and follow the instructions. 
See also: Receiving hands-free calls. 
Network 
Connect your device to TomTom services using a Bluetooth connection on your smartphone. Select 
Network, then select a phone or search for a phone and follow the instructions. 
See also: Connecting to TomTom services.  
Renaming your device 
You can give your device a unique...

16 
 
 
 
3. From the Main Menu, select Settings. 
4. Select Bluetooth Connections. 
 
5. Select Headset, then select Search for Headset and follow the instructions to establish the 
connection. 
6. Attach your headset to your helmet.  
Make sure you position the microphone correctly. For best results, don’t position the micro-
phone directly in front of your mouth, position it just to the side of your mouth. 
An image of the parts of a typical headset is shown below: 
 
 
1. Microphone 
2. On/off button...

17 
 
 
 
3. Select Bluetooth Connections. 
 
4. Select Hands-free calling. 
5. If you have not yet connected a headset, select Search for Headset and follow the instructions 
to establish the connection. 
6. Select Search for Phone and follow the instructions to establish the connection. 
When your phone is connected, your Rider imports your call history and phone contacts.  
 
Disconnecting your phone 
You can disconnect your phone in the following ways: 
 Switch off Bluetooth on your phone. 
 Switch...

18 
 
 
 
Making a hands-free call to a recent contact 
1. In the Main Menu select Phone. 
 
Your recent contacts list is shown on your Rider. 
2. Select a recent contact from the list. 
Your contact and the phone number are shown on your Rider. 
3. Select the telephone button to call your contact. 
4. Select the red button to end the call. 
 
Making a hands-free call to a contact 
1. In the Main Menu select Phone. 
 
Your phone contacts list is shown on your Rider. 
2. Select Tap here to search contacts...

19 
 
 
 
Plan a Thrill 
 
 
Select this button to plan a thrilling ride for a roundtrip or to a 
destination. 
My Routes 
 
 
Select this button to show your saved routes, recorded routes and 
imported routes. 
Add Home 
Ride Home 
 
 
Select this button to ride to your home location. If this button is not 
included in your main menu, go to My Places to set up your home location. 
Add Work 
Ride to Work 
 
 
Select this button to ride to your work location. If this button is not 
included in your main...

20 
 
 
 
Start Recording 
 
 
Select this button to start or stop recording a track.  
My Places 
 
 
Select this button to show your saved places. 
Parking 
 
 
Select this button to find car parks. 
Petrol Station 
 
 
Select this button to find petrol stations. 
Connected Services 
 
 
Select this button to see the status of your connection to the internet. 
Trip Statistics 
 
 
Select this button to see trip statistics about how far youve been riding, 
how long youve been riding, and also at what...