TomTom Rider 410 400 40 User Manual

111 
 
 
 
Changing the way you are warned 
To change the way you are warned about speed cameras, select the Sounds and Warnings button in 
the Settings menu. 
 
You can then set how you want to be warned for the different types of cameras and safety hazards. 
You can change settings for whether you want to be warned, never warned or warned only if you 
are speeding. 
For example, to change how you are warned when you approach a fixed speed camera, do the 
following: 
1. Select Sounds & Warnings in the...

112 
 
 
 
2. Select Report Speed Camera. 
 
You see a message thanking you for adding the camera. 
Tip: If you make a mistake when reporting a camera, select Cancel in the message. 
The speed camera is saved on your Rider automatically and also sent to other users.  
Confirm or remove a mobile speed camera 
You can confirm the presence of a mobile speed camera or remove a mobile speed camera if it is no 
longer present. 
Just after you pass a mobile speed camera, in the route bar you are asked if the...

113 
 
 
 
About danger zones and risk zones 
The Danger Zones service warns you about danger zones and risk zones on your route when you are 
in France. 
Since 3rd January 2012, it has been illegal to receive warnings about the position of fixed or mobile 
speed cameras when you are driving in France. To be compliant with this change in French law, 
speed camera locations are no longer reported but instead areas of danger are indicated as danger 
zones and risk zones. 
Important: Outside of France, you...

114 
 
 
 
 A symbol is shown in the route bar and on your route on the map. 
 Your distance to the start of the zone is shown in the route bar.  
 You hear a warning sound as you get near the start of the zone. 
 While you are approaching a zone or driving in a zone, your speed is monitored. If you drive 
more than 5 km/h or 3 mph over the speed limit the route bar turns red. If you drive less than 5 
km/h or 3 mph over the speed limit the route bar turns orange. 
 While you are driving in a zone...

115 
 
 
 
If a new temporary risk zone is reported directly before or after an existing risk or danger zone, 
then the new zone is added to the existing zone. 
If enough Danger Zones users report a new risk zone, that zone may become a danger zone and be 
available for all subscribers. 
You can report a risk zone in two ways: 
Using the quick menu to report a risk zone 
1. Select the current location symbol or the speed panel in the guidance view. 
2. Select Report Risk Zone from the pop-up menu. 
You...

116 
 
 
 
Appearance 
Select Settings in the Main Menu, then select Appearance. 
 
On this screen, you can change these settings: 
 Display 
Select Display to change the appearance of the display. 
 Route bar 
Select Route bar to change the information you see in the route bar. 
 Guidance view 
Select Guidance view to change the information you see in the guidance view. 
 Automatic zoom 
Select Automatic Zoom to change how you view a junction as you drive. 
 Automatic map view switching 
By...

117 
 
 
 
 Night brightness 
Move the slider to adjust the brightness level of the screen during the night.  
Select Switch to night colours when dark to automatically switch to night colours when it gets 
dark. 
Size of text and buttons 
Select Size of text and buttons to change the size of the text and the buttons you see on the 
screen. 
Note: This feature is only available on devices with a 6 inch / 15 cm or larger screen. 
Drag the slider to change the text and button size to small, medium or...

118 
 
 
 
 
Arrival information 
Select Arrival information to change the following settings: 
 Show remaining distance 
Select this setting to show the remaining distance left to travel in the arrival information panel 
during navigation.  
 Show remaining time 
Select this setting to show the remaining time left to travel in the arrival information panel 
during navigation.  
 Switch between distance and time automatically 
Select this setting to control the automatic switching between remaining...

119 
 
 
 
Automatic Zoom 
Select Settings in the Main Menu, then select Appearance. 
 
Select Automatic zoom to change settings for the automatic zoom in Guidance view when you 
approach a turn or a junction. Zooming in can make the turn or junction easier to drive. 
 Zoom in to next turn 
All the turns and junctions on your route are shown zoomed in to the maximum level. 
 Based on road type 
The turns and junctions on your route are shown zoomed in to the standard level for the type of 
road you are...

120 
 
 
 
Use this setting to control whether street names are read aloud as part of navigation instruc-
tions. For example, when street names are read aloud, you hear Turn left Graham Road to-
wards Hackney. 
 Read aloud foreign street names  
Use this setting to control whether foreign street names are read aloud as part of navigation 
instructions, such as Turn right Champs Élysées. For example, an English computer voice can 
read and pronounce French street names but pronunciation may not be...