TomTom One 4n00 004 2 Manual

							TomTom ONE 
						

							Chapter 1
What’s in the box
2 
What’s in the box
aYo u r  To m To m O N E
ATouchscreen
BCharging LED
COn/Off button
DSpeaker
EExternal antenna connector
FMemory card slot
GUSB connector
bWindshield HoldercMemory card (SD 
card)
dUSB Car ChargereUSB cable
fProduct code cardgDocumentation pack 
						

							Chapter 2
Before You Start...
3 
Before You Start...
Everyone Loves TomTom ONE
So never leave your ONE in your car when you’re not using it - it’s an easy target 
for thieves. 
Always take your ONE, the windshield holder, and the car charger with you; don’t 
leave any TomTom products on display.
Always store your ONE in the carry case to protect the screen.
Back Up Your TomTom ONE
It’s always a good idea to make a backup of the contents of your TomTom ONE. 
You can make a backup using TomTom HOME. 
For more information about TomTom HOME, see 
Using TomTom HOME on 
page 44.
Use the safety preferences
To make driving even safer with your TomTom ONE, use the Safety preferences in 
the Preferences menu.
You can choose to use the safety lock. If the safety lock is enabled, only a few 
buttons and features are available while you are driving. When you are stationary, 
all the buttons and features are available.
You can also choose to turn the map display off. 
For more information, see 
Safety preferences on page 30.
Secure your TomTom ONE
Set a password for your TomTom ONE so that only you can use it. Every time you 
start your ONE you will have to enter your password.
To set your password, run your ONE using TomTom HOME. From the Preferences 
menu, click 
Set owner to set a password.
To set the password, you have to run your ONE using TomTom HOME. You can 
then use TomTom HOME to set the password. To set a password on your device, 
do the following: 
1. Connect your ONE to your computer and switch it on. 
2. Start TomTom HOME if it does not start automatically. 
If you do not have TomTom HOME installed, insert the CD that came with your 
ONE to install it. 
Safety 
preferences 
						

							4 
Alternatively, you can download TomTom HOME from www.tomtom.com. 
Make sure you always have the latest version of TomTom HOME. For more 
information about TomTom HOME, see 
Using TomTom HOME on page 44.
3. In the Planning section, select your ONE. 
A picture of your ONE is shown in the main section of TomTom HOME. 
4. Click the On/Off button on the picture of your ONE to switch it on in TomTom 
HOME. 
Your ONE starts in TomTom HOME. You can now set the password on your ONE 
using TomTom HOME. Dont unplug your ONE, just use it as you normally would 
by clicking the buttons shown on your computer. 
5. From the Main Menu in your device, click 
Change preferences.
6. Click 
Set owner. You may have to click the arrow until you reach the page where 
Set owner is shown.  
If you cannot find the button 
Set owner, make sure that all buttons are shown 
in your ONE. Tap the button 
Show ALL menu options. All buttons will now be 
shown. 
You can now set the password for your ONE. You can also set your name and 
address, which will then be shown when your ONE starts up.
Ta k e  c a r e  o f  y o u r  To m To m O N E
It is important to take care of your ONE and to clean it correctly. 
• Use a soft cloth to wipe the screen of your ONE; do not use any liquid cleaners.
• If your ONE gets wet, dry it with a soft cloth. 
• Do not open the casing of your ONE under any circumstances. Doing so may 
be dangerous and will invalidate your warranty.
• Do not use the memory card (SD card) with any device other than a TomTom 
device. Other devices may damage the memory card.
• Do not expose your ONE to high or low temperatures, which can cause 
permanent damage. For example, don’t leave it in the car on hot summer days 
or during cold winter nights.
Set owner 
						

							Chapter 3
Getting started
5 
Getting started
Switching on
Follow the instructions on the Installation Poster to dock your TomTom ONE in 
your car.
The first time you switch on your TomTom ONE, it may take up to 20 seconds to 
start. To switch off your TomTom ONE, press and hold the On/Off button for 2 
seconds.
Setting up
You have to answer a few questions to set up your TomTom ONE. Answer the 
questions by tapping the screen. You will use the touchscreen for everything you 
do with your ONE.
You can change these settings at any time using the Preferences menu. For 
information about the Preferences menu, see 
Preferences on page 29. 
Once you have answered the questions, your ONE will display the Driving View. 
The Driving View is shown in black and white until your ONE locates your current 
position. 
For more information about the Driving View, see 
Driving View on page 13.
Locating your current position
Your TomTom ONE must be outdoors to locate your current position. The first time 
you start your ONE, it can take up to 5 minutes to find your current position. If it 
takes longer than 5 minutes, make sure that you are in an open place without tall 
buildings or trees around you.
In the future, your position will be found much faster, normally within a few 
seconds.
Once your ONE has located your current position, the Driving View is shown in full 
color and shows your position on the map. 
						

							6 
Note: Your TomTom ONE does not transmit your position. You can, however, 
send your position to TomTom Buddies. For more information, visit 
www.tomtom.com/plus
Note: Some vehicles have a heat reflective shield embedded in the 
windshield that may prevent TomTom ONE from locating your current 
position. If this is a problem in your vehicle, use the TomTom External 
Antenna Kit (available as an accessory). 
						

							Chapter 4
Making your first trip
7 
Making your first tripPlanning a route with TomTom ONE is very simple. To plan your first route, follow 
the steps below.
1. Tap the screen to bring up the main menu.
2. Tap 
Navigate to...
For your first journey, we will navigate to an address.
3. Tap 
Address.
When you enter an address, you can choose from four options:
•
City center - tap this button to set your destination as the center of a city or 
town.
•
Street and house number - tap this button to set an exact address as your 
destination.
•
Postcode - tap this button to enter a postcode as your destination.
•
Crossing or intersection - tap this button to set your destination as the point 
where two streets meet.
Note: You should always plan your journeys before you start driving. It is 
dangerous to plan routes when you are already moving.
Note: You can enter a zip code for any country. In the UK and the 
Netherlands, zip codes are detailed enough to identify a house on their own. 
In other countries you can enter a zip code to identify a town or area. You 
will then have to enter a street and address. 
						

							8 
For your first trip, we will enter an exact address.
4. Tap 
Street and house number.
5. Start to type the name of the town where you want to go.
As you type, the names of the towns that match what you have typed are 
shown. 
6. Start to type the name of the street.
As with the name of the town, the names of the streets that match what you 
have typed are shown. 
7. Now enter the house number of your destination and then tap 
Done.
8. ONE asks you whether you need to arrive at a particular time.
Ta p  
YES to enter an arrival time. ONE shows you whether you will arrive on 
time. For more information, see 
Arrival times on page 9.
The route is then calculated by your TomTom ONE. 
						

							9 
9. When the route has been calculated, tap Done.
TomTom ONE will immediately start guiding you to your destination with spoken 
instructions and visual instructions on the screen.
Arrival times
Ta p  YES to enter an arrival time.
Your ONE calculates your arrrival time and shows you whether you will arrive on 
time. 
You can also use this information to work out when you need to leave. If your ONE 
shows you that you will arrive 30 minutes early, you can wait and leave in 30 
minutes time, rather than arrive early. 
Your arrival time is constantly recalculated during your trip. The status bar shows 
whether you will arrive on time or late, as shown below:
Note: Before you can plan a route in this way, TomTom ONE must first 
locate your current position.
You will arrive 55 minutes before the arrival time you entered.
If the estimated arrival time is more than five minutes before the 
time you entered, it is shown in green.
You will arrive 3 minutes before the arrival time you entered. 
If the estimated arrival time is less than 5 minutes before the 
time you entered, it is shown in yellow.
You will arrive 19 minutes late.
If the estimated arrival time is later than the time you entered, it 
is shown in red. 
						

							10 
What are the other navigation options?
When you tap Navigate to..., you can set your destination in many ways, not just 
by entering the address. The other options are listed below:
Planning in advance
You can also use your ONE to plan trips in advance by selecting both your starting 
point and your destination. You could, for example, do the following:
• Find out how long a trip is going to take before you start.
• Check the route of a trip you are planning.
• Check a route for someone who is coming to you and explain the route to them.
To plan a route in advance, follow these steps:
1. Tap the screen to bring up the main menu.
2. Tap 
Advanced planning.
Home
Tap this button to navigate to your Home location. 
You will probably use this button more than any other. 
For information about setting your Home location, see Change Home 
location on page 31.
Favorite
Tap this button to select a Favorite as your destination.
For more information about Favourites, see Favorites on page 19.
Recent 
destination
Tap this button to select your destination from a list of places you have 
recently used as destinations.
Point of 
Interest
Tap this button to navigate to a Point of Interest (POI). 
For more information about POIs and navigating to a POI, see Points of 
Interest on page 22.
Point on map
Tap this button to select a point on the map as your destination using the 
map browser.
For more information about the map browser, see Using the Map on 
page 17.
Latitude 
Longitude
Tap this button to enter a destination with latitude and longitude values. 
To m To m  
Buddy
Tap this button to navigate to the current position of a TomTom Buddy. Don’t 
forget that the Buddy may move before you reach him.
For more information about TomTom Buddies, see TomTom PLUS on 
page 42.